5. Move the platform (3) to the desired floor height (maximum of the 8th
rung). Keep in mind that the horizontal braces should be at knee and hip height.
6. Assemble a diagonal brace (5) in the lower folding unit from the 2nd to the 6th rung.
7. Climb up on the inside and click the toe board holders (7) to the upright on the top work floor
and place the toe boards in the slots of the toe board holders.
8. Check again that the scaffold stands properly, the wheels are on the brake and the stabilizers
are firmly on the ground.
Floor height 3.70 m (D)
1. Insert the wheels (8) into the folding unit 6-rung (1) at the bottom and secure with a locking
clip (9).
2. Fold open the folding unit, place the platform with trapdoor (3) on the 3rd rung and secure
the folding unit with a locking clip in the hinge piece.
3. Position the (tele-)stabilizers (6) and make sure they are firmly on the ground. Always place a
stabilizer link under a rung (to prevent slipping). For the correct assembly see section 2.5.4.
4. Open the 2nd folding unit 6-rung (1) on the ground and assemble it in the same form as the
underlying folding unit. Secure all uprights with locking clips.
5. Mount (sitting on the platform) 2 horizontal braces (knee and hip height) before standing on
the platform.
6. Attach a diagonal brace (5) to the 5th to the 10th rung.
7. Mount the 2nd platform with trapdoor (3) on the 5th rung of the 2nd folding unit.
8. Open the folding unit 3-rung (2) on the ground, click in 2 horizontal braces (hip and knee
height) and assemble it in the same form as the underlying folding unit. Secure all uprights
with locking clips.
9. Climb up on the inside and snap the side board holders (7) to the upright on the top work
floor and place the side boards in the slots of the side board holders.
10. Check again that the scaffolding is properly positioned, the wheels are on the brake and the
stabilizers are firmly on the ground.
Floor height 4.50 m (E)
1. Insert the wheels (8) into the folding unit 6-rung (1) at the bottom
and secure with a locking clip (9).
2. Open the folding unit, place the platform with trapdoor (3) on the 6th
rung and secure the folding unit with a locking clip in the hinge piece.
3. Place the (tele-)stabilizers (6) and make sure they are firmly on the
ground. Always place a stabilizer link under a rung (to prevent
slipping). For the correct assembly see section 2.5.4.
4. Install a diagonal brace (5) in the lower folding unit from the 1st to the
5th rung.
5. Open the 2nd folding unit 6-rung (1) on the ground and assemble it in
the same form as the underlying folding unit. Secure all uprights
with locking clips.
6. Mount (sitting on the platform) 2 horizontal braces (knee and
hip height) before standing on the platform.
7. Mount a diagonal brace (5) in the 2nd folding unit 6-rung
from the 1st to the 5th rung.
8. Mount the 2nd platform with trapdoor (3) on the 6th
rung of the 2nd folding unit.
