ASROCK EPC612D8 Bedienungsanleitung

EPC612D8 / EPC612D8A / EPC612D8A-TB

Quick Installation Guide

www.asrockrack.com

No. Description No. Description

1 Serial Port (COM1) 7 Display Port Input (DP_IN1)*

2VGA Port (VGA1) 8 LAN RJ-45 Port (IPMI_LAN)

3 LAN RJ-45 Port (LAN2) 9 USB 3.0 Ports (USB3_1-2)

4 LAN RJ-45 Port (LAN1) (NCSI) 10 Front Speaker (Lime)**

5 USB 2.0 Ports (USB_1_2) 11 Microphone (Pink)**

6 underbolt Port (TB1)* 12 Line In (Light Blue)**

*Supports EPC612D8A-TB only

**Supports EPC612D8A only

P/N: 15G065023100AK V1.0

Install the Server Board

Motherboard Layout

Jumper Cap On/O

The server board User's Manual is available for download from the ASRock Rack's ofcial website

at http://www.asrockrack.com.

Take note of the following precautions before you install server board components or change any

server board settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the server board’s components due to static electricity, NEVER place your

server board directly on the carpet or the like. Also remember to use a grounded wrist strap or

touch a safety grounded object before you handle the components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag

that comes with the component.

5. When placing screws into the screw holes to secure the server board to the chassis, please do

not over-tighten the screws! Doing so may damage the server board.

1Insert the server board into the chassis.

2Affix t he screws clockwise into t he

mounting holes in all of the corners of

the server board.

Do not over-tighten the screws

When the jumper cap is placed on the pins, the

jumper is “Short”. If no jumper cap is placed on the

pins, the jumper is “Open”.

The illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when a jumper cap is placed on

these 2 pins.

I/O Panel

24.4cm (9.6 in)

30.5cm (12.0 in)

ATXPWR1

PCIE1

VGA1

COM1

TBT1

LAN1

(NCSI) LAN2

USB3_3_4

DDR4_A1 (64 bit, 288-pin module)

DDR4_A2 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)

DDR4_B2 (64 bit, 288-pin module)

DDR4_D2 (64 bit, 288-pin module)

DDR4_D1 (64 bit, 288-pin module)

DDR4_C2 (64 bit, 288-pin module)

DDR4_C1 (64 bit, 288-pin module)

ATX12V1

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

AUDIO1

PCIE3

PCIE5

PCIE7

PCIE6

PSU_SMB1

Dr.

Debug

TPM1

PANEL1

COM2

HD_AUDIO1

SPEAKER1

IPMB_1

CMOS

Battery

RoHS

BUZZER1

Top:

IMPI_LAN

BMC_SMB_1 BMC_SMB_2 BMC_SMB_3

2 3 4

3134

383940

TR1

3337

HDMI_SPDIF1

Intel

C612

128Mb

BIOS

BMC

ROM

EPC612D8A-TB

CPU_FAN1

DP_IN1

M_SATA_1

M_SATA_0

SATA_ 2

SATA_ 1

SATA_ 4

SATA_ 3

SSATA_1

SSATA_0

USB_3_4

SATA_SGPIO1

SATA_SGPIO2

SSATA_3

SSATA_2

SATA_0

USB_5

NMI_BTN1

AUX_PANEL1

FRONT_FAN3

SATA_PWR1

SATAPWR1

SATA_SGPIO3

FRONT_FAN1

FRONT_FAN2

NUT1

NUT2NUT3NUT4

NUT5

26 25

28293032353641

CHASSIS_ID2

CHASSIS_ID1

CHASSIS_ID0

PECI1

SATA_ 5

REAR_FAN1

USB 3.0

T: USB3_2

B: USB3_1

USB 2.0

T: USB_1

B: USB_2

No. Description

12 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_

D2, White)

22 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_

D1, Blue)

3 ATX 12V Power Connector (ATX12V1)

4PSU SMBus (PSU_SMB1)

5 ATX Power Connector (ATXPWR1)

6 CPU Fan Connector (CPU_FAN1)

72 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_

B2, White)

82 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_

B1, Blue)

9 USB 3.0 Header (USB3_3_4)

10 TPM Header (TPM1)

11 SATA3 Connector (M_SATA_1), White

12 SATA3 Connector (M_SATA_0), White

13 Front Fan Connector (FRONT_FAN2)

14 Front Fan Connector (FRONT_FAN1)

15 SATA3 Connector (SATA_4), White

16 SATA3 Connector (SATA_3), White

17 SATA3 Connector (SATA_2), White

18 SATA3 Connector (SATA_1), White

19 SATA3 Connector (SSATA_1), White

20 SATA3 Connector (SSATA_0), White

21 SATA SGPIO Connector (SATA_SGPIO1)

22 USB 2.0 Header (USB_3_4)

23 SATA SGPIO Connector (SATA_SGPIO3)

24 SATA3 DOM Connector (SATA_0), Red

25 SATA DOM Power Jumper (SATAPWR1)

26 SATA SGPIO Connector (SATA_SGPIO2)

27 SATA3 Connector (SATA_5), White

28 SATA3 Connector (SSATA_2), White (Marvell 9172)

29 SATA3 Connector (SSATA_3), White (Marvell 9172)

30 SATA DOM Power Header (SATA_PWR1)

31 Vertical Type A USB 2.0 (USB_5)

32 Front Fan Connector (FRONT_FAN3)

33 System Panel Header (PANEL1)

34 ermal Sensor header (TR1)

35 Auxiliary Panel Header (AUX_PANEL1)

36 Speaker Header (SPEAKER1)

37 Intelligent Platform Management Bus header (IPMB_1)

38 BMC SMBus Header (BMC_SMB_3)

39 BMC SMBus Header (BMC_SMB_2)

40 BMC SMBus Header (BMC_SMB_1)

41 Non Maskable Interrupt Button (NMI_BTN1)

42 COM Port Header (COM2)

43 Chassis ID0 Jumper (Chassis ID0)

44 CPU PECI Jumper (PECI1)

45 Chassis ID0 Jumper (Chassis ID1)

46 HDMI_SPDIF Header (HDMI_SPDIF1)*

47 Chassis ID0 Jumper (Chassis ID2)

48 Front Panel Audio Header (HD_AUDIO1)*

49 Rear Fan Connector (REAR_FAN1)

*Supports EPC612D8A and EPC612D8A-TB only

*15G065023100AK*

EPC612D8 / EPC612D8A / EPC612D8A-TB

Quick Installation Guide

www.asrockrack.com

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

8LAN Port LED Indications

Dr. Debug

Code Description

00 Please check if the CPU is installed correctly and then clear CMOS.

0d Problem related to memory, VGA card or other devices. Please clear CMOS, re-install the memo-

ry and VGA card, and remove other USB, PCI devices.

01 - 54

(except 0d),

5A- 60

Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the

problem still exists, please install only one memory module or try using other memory modules.

55 e Memory could not be detected. Please re-install the memory and CPU. If the problem still

exists, please install only one memory module or try using other memory modules.

61 - 91 Chipset initialization error. Please press reset or clear CMOS.

92 - 99 Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other

slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.

A0 - A7 Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem

still exists, please clear CMOS and try removing all SATA devices.

b0 Problem related to memory. Please re-install the CPU and memory. If the problem still exists,

please install only one memory module or try using other memory modules.

b4 Problem related to USB devices. Please try removing all USB devices.

b7 Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the

problem still exists, please install only one memory module or try using other memory modules.

d6 e VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the

problem still exists, please try installing the VGA card in other slots or use other VGA cards.

d7 e Keyboard and mouse could not be recognized. Please try re-installing the keyboard and

mouse.

d8 Invalid Password.

FF Please check if the CPU is installed correctly and then clear CMOS.

123

Open the socket levers and the

CPU socket cover.

Install the processor and close

the socket cover.

Close the socket levers. Remove

the CPU protection cap.

Install the CPU Fan and Heatsink

CPU_FAN

Apply the thermal grease. Install the

CPU fan and heatsink and secure

the screws.

Connect the CPU fan to the CPU

FAN connector.

Install the Memory

Install the Power Cables

123

Unlock a DIMM slot by

pressing the module clip

outward.

Insert the memory module. Lock the clip.

10 Install the PCIE Card

1Remove the bracket facing the slot that

you intend to use. Keep the screw for

later use.

2Align the card connector with the

slot and press firmly until the card is

completely seated on the slot.

Fasten the card to the chassis with the

screw.

IPMI LAN Port

1G LAN Port

Front Panel Audio

System Panel Auxiliary Panel

12 Headers

ACT/LINK LED

SPEED LED

LAN Port

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity (100Mbps) Orange 100Mbps connection

On Link Green 1Gbps connection

GND

RESET#

PWRBTN#

PLED-

PLED+

GND

HDLED-

HDLED+

GND

SMB_CLK

SMB_Alert

CASEOPEN

SMB_DATA

+3VSB

LAN1_LINK

LED_PWR

LAN2_LINK

LED_PWR

+5VSB

GND

LOCATORLED1+

LOCATORLED1-

LOCATORBTN#

System Fault LED-

System Fault LED+

J_SENSE

OUT2_L

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

HDMI_SPDIF

SPDIFOUT

GND

PWROK_PS

5VSB

12V

121

13 24

-12V

GND

PSON#

GND

N/A

+12V2

GND

Install the Processor

CPU fan for narrow ILM socket

*Support an active or passive heatsink

We recommend using the CPU Installation tool to avoid CPU pin-bent problem.

Dieses Handbuch passt für folgende Modelle

Andere ASROCK Serverplatine Handbücher

ASROCK

ASROCK EC262D4U-2L2T Bedienungsanleitung

Beliebte Serverplatine Handbücher anderer Marken

Abit

Abit SI-2PS Bedienungsanleitung

Intel

Intel S2600KP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6026TT-TF Bedienungsanleitung

Intel

Intel S2600CO series Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Installations- und Betriebshandbuch

Advantech

Advantech ASMB-784 Bedienungsanleitung

Intel

Intel SE7520BD2 Bedienungsanleitung

MSI

MSI 5000P Master2 Series Bedienungsanleitung

MSI

MSI MS-S0131 Bedienungsanleitung

Intel

Intel S845WD1-E - Server Board Motherboard Bedienungsanleitung

TYAN

TYAN Transport GT24 (B2912) Service Bedienungsanleitung

MSI

MSI E7320 Master-2S Bedienungsanleitung

MSI

MSI 5000P Master-A4M Bedienungsanleitung

Intel

Intel SC5650BCDP Konfigurationshandbuch

Gigabyte

Gigabyte R182-34A Bedienungsanleitung

Asus

Asus ASMB3-SOL Bedienungsanleitung

Supero

Supero H8QI6-F Bedienungsanleitung

Intel

Intel SPKA4 - Server Platform - 0 MB RAM Bedienungsanleitung