Assmann Digitus DN-13024 Bedienungsanleitung
2-PORT USB 2.0 WIRELESS MULTI-
FUNCTIONAL NETWORK SERVER,
300 Mbps
Manual
DN-13024
2
CONTENTS
GETTING STARTED ..........................................................................................2
Check package contents for:............................................................................... 2
System Requirements:........................................................................................ 3
PRODUCT OVERVIEW......................................................................................3
LEDs..................................................................................................................... 3
Ports and Buttons ............................................................................................... 4
HARDWARE INSTALLATION.............................................................................5
Connecting your server to a network ................................................................. 5
SOFTWARE INSTALLATION ..............................................................................5
Installing Software Utility ................................................................................... 5
SERVER CONFIURATION..................................................................................6
Configuring your Device Server .......................................................................... 6
Using the USB Device Server .............................................................................. 7
HOW TO: PRINT..............................................................................................8
Auto-Connect Printer.......................................................................................... 8
HOW TO: SCAN............................................................................................. 10
Network Scanner .............................................................................................. 10
USB Storage ................................................................................................. 11
GETTING STARTED
Check package contents for:
•One 2-Port USB 2.0 Device Server
•Setup CD with Print Control Center Software
•One DC 5V/2A Power Adaptor
•One Quick Installation Guide (QIG)
3
System Requirements:
Windows 7/ 10
What you will need to get started:
•One Storage Device along with manufacturer's driver/software CD
•A Computer with a CD-ROM drive that is connected to your home network
•One Ethernet cable
•One USB cable
PRODUCT OVERVIEW
LEDs
Power
This LED indicator is solid green when your router is powered on. Otherwise if this LED
indicator is off, there is no power to your router.
Link
This LED indicators will be light on green while data is transmitted or received through
your router LAN port. Be light on orange while unplugging the cable, the wireless
connection successful.
ACT
This LED indicator is blinking green when the wireless is “On” and functioning properly
with your router. This LED indicator will be blinking green rapidly while data is
transmitted or received by your wireless clients or wireless network devices connected
to your router.
USB1/ USB2
This LED indicator will be blinking
4
Ports and Buttons
1) USB1 & USB2 Port
The USB 2.0 port allows you to connect USB printers and storage devices to your
network and share access to these devices to computers on your network through the
use of the included USB software utility.
2) LAN Port
This port allowes you to connect to the local network.
3) On/Off Power Switch
Move the On/Off switch to power “On” (Left position) or “Off” (Outer position) the
device. (ON/OFF)
4) WPS/ Init Button
Push and hold this button for 5 seconds to activate Wi-Fi Protected Setup (WPS) Push
Button Configuration (PBC) setup. Push and hold for 15 seconds to reset the device to its
factory default setting.
5) Power Port
Connect the included power adapter from your router power port and to an available
power outlet.
5
HARDWARE INSTALLATION
Connecting your server to a network
1) Use the Ethernet cable and connect one end to the “LAN” port of the Device Server.
Connect the other end to an available LAN Port on your network router.
2) Connect the Server to your All-in- One/Multifunction device using a USB cable (not
included).
3) Plug in the power adaptor (included in package) to power on the print server. Make
sure the On/OFF switch is set to “ON”.
4) Once powered on, check the server’s LEDs to ensure that the server is indeed
working and connected to network devices and printers.
SOFTWARE INSTALLATION
Installing Software Utility
1) Insert Hawking software Setup CD (included in package) to desired client computer
and run CD.
2) When the auto-load page appears, click Setup Wizard. If the autoload page does not
appear, click Start--> Computer--> CD/DVD Drive--> autorun.exe.
3) Click Next button in proceeding installation windows until a Finish button appears,
and then click Finish.
6
SERVER CONFIURATION
Configuring your Device Server
1) Open the Device Server Control Center from the desktop icon. While the program is
running, an icon should also be displayed in your system Tray if software installation
was successful. Once open, it will automatically search for the existing server and
display its status.
2) Double click on the device on the control center and it will open a web browser
showing the user interface of the product.
3) Login with administrator ID (default: admin) and its password (default: admin).
Methods for Setting the IP Address
7
Using the USB Device Server
1) In the Control Center, click the USB device server that has the desired USB device
attached.
2) Click the desired USB device.
3) Click the “Connect” button. Then the message “Manually Connect by
your_computer_name” will be shown.
4) Now, PC will detect the plug-in of the USB device. The “connect” operation is a
software operation that simulates an actual USB device plug-in. That is to say, when
you do a “connect” operation in the Control Center, PC can then detect a USB
device’s plug-in, although actually you do not plug in any USB device.
5) Then, just use the USB device as if it is connected directly to your PC’s USB port.
8
6) After you finish using the USB device, click the USB device in the Control Center and
then click the “Disconnect” button to disconnect the USB device. Other PCs can not
“Connect” the USB device until you “Disconnect” that USB device. That is to say, only
one PC is allowed to connect the USB device at the same time.
HOW TO: PRINT
Auto-Connect Printer
1) In the Control Center, click the USB device server that has the desired printer (or
MFP) attached.
2) Click the desired printer (or MFP).
3) Click the “Auto Connect Printer” button and choose “Set Auto-Connect Printer”.
4) Choose the desired printer. The desired printer must be the Windows printer
(this is a logical printer) that matches the printer attached on the USB device server
(this is a physical printer). Then click the “Apply” button.
9
Then, the printer will be marked as an “Auto-Connected Printer” in red. If you choose
“Auto-Connected Printer List” in the “Tools” menu, you can see a newly created item
that describes the association between the Windows printer and the physical printer
on the server.
•Then try to issue a print job to the desired printer. You will see the Control Center will
automatically do a connect operation. Then, the print job will be issued to that
printer.
•Even you already properly setup an auto-connected printer, the Control Center must
be running (in the background) while a print job is issued. This means you’d better
run the Control Center every time after you login Windows. In order to skip this
manual operation, you can make the Control Center be run automatically after you
login Windows. To do this, choose the “Configuration” item in the “Tools” menu. The
following window will appear. Click on the check box and then on the “OK” button.
This feature is enabled by default.
•If you would like to break the association between the Windows printer and the
physical printer, just click on the association and click the “Delete” button in the
“Auto-Connected Printer List”.
10
HOW TO: SCAN
Network Scanner
1) In the Control Center, click the USB device server that has the desired MFP
(or scanner) attached.
Click the desired MFP (or scanner).
2) Click the “Network Scanner” button. Then you can see that the Control Center will
automatically do a “connect” operation. The following window will appear.
3) Follow the usual steps to do scanning.
4) After the scanning, close the “Auto-Connect Scanner” window. At this moment,
Control Center will automatically do a disconnect.
Andere Handbücher für Digitus DN-13024
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Assmann Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung