Associated Electrics RC8B3.2e Bedienungsanleitung

AssociatedElectrics.com

:: Introduction:: Introduction

:: KIT Features:: KIT Features

:: Additional:: Additional

:: Other Helpful Items:: Other Helpful Items

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and

maintaining your new Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the

illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.

Check each bag for these sheets before you start to build.

Features in the RC8B3.2e Kit:

• New suspension arm design with inserts for flex adjustments

• Longer rear suspension arm length with narrow rear arm mounts

• New stiff shock bladder design improves jumping and handling performance

• Updated shock cap works for bladder or emulsion style shock setups

• Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws

• I.F.M.A.R. approved rear wing

• 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios

• Updated chassis with chamfered front edges to reduce drag

• Side guards are now threaded into the chassis from the top side of the car

• Two-piece sliding motor mount for easy gear mesh adjustment and motor removal

• 90% parts compatibility with RC8B3.1e

Your new RC8B3.2e Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):

• 2 or 3 channel radio/transmitter - /2.4GHz recommended • Transmitter batteries

• 1/8th scale sized motor (#27405, #27406) • 1/8th scale sized ESC (#27007)

• 4s LiPo Battery Pack (#27341, #27342) • Polycarbonate-specific paint

• Steering servo - (#27101, #27115) • Thread-locking compound - (#1596)

• 1:8 scale buggy tires • 1:8 scale buggy wheels • CA (cyanoacrylic) glue - (#1597)

• Needle-nose pliers • Hobby knife • Reamer / hole punch • Ride height gauge

• Silicone Shock/Diff Fluids (Refer to catalog for complete listings) • Body Scissors (AE #1737)

• Shock Pliers - (#1675) • FT Hex Wrenches - (#1518) • FT Hex Wrenches / Nut Drivers - (#1519)

• Reamer / Hole Punch - (#1499) • Wire Cutters • Calipers or a Precision Ruler

• Ride Height Gauge - (#1449) • Turnbuckle Wrench - (#1114) • Wheel Nut Wrench 17mm - (#1571)

• FT 5.0mm Hex Driver - (#1506) • Scissiors - (#1737)

Associated Electrics, Inc.

21062 Bake Parkway.

Lake Forest, CA 92630

www.AssociatedElectrics.com · https://twitter.com/Team_Associated · www.instagram.com/teamassociatedrc/ · www.facebook.com/TeamAssociated/

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

:: Hardware - 1:1 Scale View:: Hardware - 1:1 Scale View

2.5x6mm (4675)

2.5x8mm (31448)

3x6mm (31541)

3x8mm (25201)

Titanium (91592)

3x10mm (25202)

Titaniuim (91593)

3x12mm (25203)

Titanium (91594)

3x14mm (89208)

Titanium (91595)

3x30mm (89212)

4x10mm (81262)

4x12mm (89214)

4x14mm (89217)

4x16mm (81263)

4x20mm (81264)

Flat Head (fhcs)

2x5mm (31511)

2x16mm (7184)

3x8mm (89223)

3x10mm (25620)

3x24mm (89225)

Socket Head (shcs)

2x4mm (91492)

2.5x6mm (31520)

2.5x8mm (31521)

2.5x18mm (81259)

3x6mm (31531)

Titanium (91580)

3x10mm (25211)

3x14mm (25187)

Titanium (91584)

3x16mm (89203)

Titanium (91585)

3x20mm (25188)

3x24mm (89204)

Titanium (91589)

4x14mm (81260)

4x16mm (81261)

Button Head (bhcs)

3x3mm (25225)

3x6mm (81257)

3x10mm (4671)

3x12mm (81258)

4x4mm (7732)

5x4mm (89221)

Set Screws

5x8x2.5mm (8680)

5x10x4mm (91560)

6x10x3mm (31404)

6x12x4mm (91561)

8x16x5mm (91564)

8x16x5mm flanged

(91565)

15x21x4mm (91566)

Ball Bearings

M2.5 LockNut, Silver (89215)

M3 Nut (91477)

M3 Alum. Locknut, Blue (31550)

M3 Locknut, Black (25215)

M3 Locknut w/Flange (25612)

FT 3mm Locknuts, Blue(25392)

M4 Locknut (89216)

FT M4 Locknut, Blue (31551)

M4 Locknut, Serrated (91738)

Nuts (lock/plain) Washers / Shims

5.5x0.5mm (31381)

5.5x1.0mm (31382)

5.5x2.0mm (31383)

2.6x6mm Washer (89278)

Bulkhead Washers

7.8x2.0mm, Blue (31386)

3x8mm Washer (89218)

:: Table of Contents:: Table of Contents

1................... Cover

2................... Introduction

3................... 1:1 Hardware “Fold Out”

4................... Table of Contents

5 - 7..............Differentials Build

(Bag 1.1, 1.2)

7 - 8..............Shocks Build

(Bag 2.1)

9....................Turnbuckles Build

(Bag 3.1, 3.2)

10 - 11.........Steering / Chassis Build

(Bag 4.1, 4.2)

11 - 14........Front Gearbox Build

(Bag 5.1, 5.2, 5.3)

14 - 15........Steering Blocks Build

(Bag 6.1, 6.2)

16 - 18.........Rear End Build

(Bag 7.1, 7.2, 7.3)

19.................Rear Hubs Build

(Bag 8.1, 8.2)

20................Center Bulkhead Build

(Bag 9.1, 9.2)

20 - 21.......Battery Tray Build

(Bag 10.1, 10.2)

22................Receiver Box Build

(Bag 11.1, 11.2)

23................Wheels / Tires / Body

(Misc.)

24 - 33.......Droop Settings / Catalog

34................Back Cover

:: Notes:: Notes

There is a 1:1 hardware foldout page in the

front of the manual. To check the size of a part,

line up your hardare with the correct drawing

until you find the exact size. Each part in the

foldout has a number assigned to it for ordering

replacement parts.

This symbol indicates a special

note or instruction in the manual.

This symbol indicates a Racers Tip.

Associated Electrics, Inc.

21062 Bake Parkway.

Lake Forest, CA 92630

www.AssociatedElectrics.com · https://twitter.com/Team_Associated · www.instagram.com/teamassociatedrc/ · www.facebook.com/TeamAssociated/

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

:::: Differential BuildDifferential Build (Front and Rear)(Front and Rear) - Bag 1.1, 1.2 - Step 2- Bag 1.1, 1.2 - Step 2

:::: Differential BuildDifferential Build (Front and Rear)(Front and Rear) - Bag 1.1, 1.2 - Step 3- Bag 1.1, 1.2 - Step 3

:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 1:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 1

2/20

#6588

black grease

#6588

black grease

#6588

black grease

#6588

black grease

Align pin with

groove in sun gear

Align pin with

groove in sun gear

Set aside 13x15.8mm

shims until diff install

81380

2.5x12mm

81380

2.5x12mm

81380

Diff Sun

Gear, 20T,

HTC

81012

17mm

Outdrive,

Front Diff

81012

17mm

Outdrive,

Front Diff

81008

15mm

Outdrive,

Rear Diff

81008

15mm

Outdrive,

Rear Diff

81380

Diff Planet

Gear, 10T,

HTC

81380

Diff

Crosspin

81381

Diff Shim

3.6x12x0.12mm

81381

Diff Shim

6x8x0.20mm

81381

Diff Shim

6x8x0.20mm

91564

8x16x5

Bearing

91564

8x16x5

Bearing

81379

Diff

Case

81009

Diff Ring

Gear, 42T

81385

Outdrive

O-Ring

5.8x1.9mm

81385

Outdrive

O-Ring

5.8x1.9mm

x4x4

x2x2

Racer’s Tip:

You can use #81385 planet o-ring

between the planet gears and the

diff shims as a tuning option.

Do not install 3.3x1.5mm planet

o-ring for kit setup.

81380

Diff Sun

Gear, 20T,

HTC

:::: Differential BuildDifferential Build (Front and Rear)(Front and Rear) - Bag- Bag 1.1, 1.21.1, 1.2 - Step 4- Step 4

:::: Differential BuildDifferential Build (Center)(Center) - Bag- Bag 1.1, 1.21.1, 1.2 - Step 5- Step 5

:::: Differential BuildDifferential Build (Center)(Center) - Bag- Bag 1.1, 1.21.1, 1.2 - Step 6- Step 6

89208

3x14mm

FHCS

x4x4

Diff Fluid

81384

Diff

Gasket

Front Diff Fluid:

5,000cst #5453

Rear Diff Fluid:

5,000cst #5453

Racer’s Tip:

Use black grease

(#6588) to coat

the diff gasket

before installation!

81380

Diff Planet

Gear, 10T,

HTC

81380

Diff

Crosspin

81381

Diff Shim

3.6x12x0.12mm

x4x4

x2x2

#6588

black grease

#6588

black grease

#6588

black grease

Align pin with

groove in sun gear

81380

2.5x12mm

81012

17mm

Outdrive,

Center Diff

81381

Diff Shim

6x8x0.20mm

91564

8x16x5

Bearing

81379

Diff

Case

81385

Outdrive

O-Ring

5.8x1.9mm

Racer’s Tip:

Fill diff above the cross

pins, below the planet

gears as shown.

81380

Diff Sun

Gear, 20T,

HTC

Racer’s Tip:

You can use #81385 planet o-ring

between the planet gears and the

diff shims as a tuning option.

Do not install 3.3x1.5mm planet

o-ring for kit setup.

:::: Differential BuildDifferential Build (Center)(Center) - Bag- Bag 1.1, 1.21.1, 1.2 - Step 7- Step 7

:::: Differential BuildDifferential Build (Center)(Center) - Bag- Bag 1.1, 1.21.1, 1.2 - Step 8- Step 8

Align pin with

groove in sun gear

Racer’s Tip:

Fill diff above the cross

pins, below the planet

gears as shown.

Racer’s Tip:

Use black grease

(#6588) to coat

the diff gasket

before installation!

Center Diff Fluid:

5,000cst #5453

:: Shocks Build:: Shocks Build -- Bag 2.1Bag 2.1 - Step 1- Step 1

81186

Shock

O-Ring

81185

O-Ring Hat

Bushing

81188

Shock Body

Seal

Retainer

81200

Shock Piston

(8x1.2 tapered)

x2x2

81170

TiN Shock Shaft,

3.5x30.5mm

(Front)

81185

O-Ring

Spacer

81160

Shock Body,

30.5mm

(Front)

81161

Shock Body,

39.5mm

(Rear)

81185

Shock Body

O-Ring

81173

TiN Shock Shaft,

3.5x42.5mm

(Rear)

89278

2.6x6mm

Washer

89215

2.5mm Shock

Piston Locknut

x2x2

Set aside shock pins

and M3x6mm set

screws until shock

installation

Install pistons

taper down

89208

3x14mm

FHCS

x4x4

Center Diff Fluid:

5,000cst #5453

groove in sun gear

81384

Diff

Gasket

#6588

black grease

#6588

black grease

#6588

black grease

81380

2.5x12mm

81380

Diff Sun

Gear, 20T

81012

17mm

Outdrive,

Center Diff

81381

Diff Shim

6x8x0.20mm

91564

8x16x5

Bearing

81385

Outdrive

O-Ring

5.8x1.9mm

Diff Fluid

81389

B3.1e

Plastic Spur

Gear, 46T

:::: Shocks BuildShocks Build -- BagBag 2.12.1 - Step 4

The springs come with

a colored marking

pre-installed for easy

identification

81194

Spring

Cup,

20mm

81221

Spring

Collar O-Ring,

20mm

81221

Spring

Collar, 20mm

81225

V2 Front Spring,

Blue (5.50lb/in)

81231

V2 Rear Spring,

Blue (4.30lb/in)

shock

fluid

:::: Shocks BuildShocks Build -- BagBag 2.12.1 - Step 3- Step 3

:::: Shocks BuildShocks Build -- BagBag 2.12.1 - Step 2- Step 2

When installing the

shock bladder, make

sure it is correctly

seated within the

shock cap as shown.

Leave a gap

when

installing the

shock cap.

Fill to top of

shock body.

shock

fluid

Front Shock Fluid:

35wt #5429

Rear Shock Fluid:

30wt #5422

Front Shock Fluid:

Rear Shock Fluid:

81453

Bladder,

Stiff

81452

RC8B3.2

Shock Cap

81181

Shock Cap

Insert

91492

2x4mm

BHCS

91492

Gasket

81194

Shock

Rod End

and Ball

81190

Shock

Boots

Racer’s Tip:

Use green slime

(#1105) to

lube the o-rings

before installation!

81181

Shock Cap

Insert

Compress shock shaft fully.

Let shock fluid bleed from

bleeder screw hole, then

tighten the screw.

For more rebound, do not

compress shock shaft as far

before tightening the

shock cap.

:::: Turnbuckles BuildTurnbuckles Build -- BagBag 3.1, 3.23.1, 3.2 - Step 1- Step 1

:::: Turnbuckles BuildTurnbuckles Build -- BagBag 3.1, 3.23.1, 3.2 - Step 2- Step 2

:::: Turnbuckles BuildTurnbuckles Build -- BagBag 3.1, 3.23.1, 3.2 - Step 3- Step 3

Set aside until page 22

Set aside until page 15

Set aside until page 19

Note the direction of

turnbuckle ball

Rear Hub Turnbuckle

Steering Turnbuckle

x2x2

11.50mm (0.45”)

Steering Servo Turnbuckle

1401

33mm

Turnbuckle

91469

Ball Cup

16.00mm (0.63”)

81398

Turnbuckle

Ball,

Shouldered

81094

Rod End,

5mm,

Offset

81094

Rod End,

5mm

81397

Turnbuckle

Ball,

Shouldered

81397

Turnbuckle

Ball,

Shouldered

89269

Steel

Turnbuckle,

5x38mm

81093

Rod End,

4mm,

Offset 81093

Rod End,

4mm

89526

4x50mm

Turnbuckle

25.00mm (0.98”)

Left Turnbuckle

Right Turnbuckle

:::: Steering / ChassisSteering / Chassis BuildBuild - Bag- Bag 4.1, 4.24.1, 4.2 --Step 2Step 2

:::: Steering / ChassisSteering / Chassis BuildBuild - Bag- Bag 4.1, 4.24.1, 4.2 --Step 3Step 3

8680

5x8x2.5mm

Bearing

x4x4

81084

Servo

Saver

Tube

81084

Servo Saver

Tube Shim

31404

6x10x3mm

Bearing

81083

Servo

Saver

Spring

1.5mm

81086

Servo

Saver Arm

81084

Servo Saver

Tube Spring

Nut & O-Ring

81086

Steering

Bellcrank

81086

Steering

Bellcrank

x2x2

x4x4

Racer’s Tip:

Use black grease

(#6588) to lube

the bellcrank halves

before installation!

:::: Steering / ChassisSteering / Chassis BuildBuild - Bag 4.1, 4.2- Bag 4.1, 4.2 --Step 1Step 1

#6588

black grease

#1596

thread lock

81091

Steering

Post

81262

4x10mm

FHCS

x2x2

81460

RC8B3.2e

Chassis

81431

RC8B3.2

Side

Guards

25201

3x8mm

FHCS

31540

3x5mm

FHCS

x8x8

x2x2 Loosely attach

3x5mm FHCS and

then install 3x8mm

FHCS. Tighten after

all screws are installed

(not included)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Associated Electrics Motorisiertes Spielzeugauto Handbücher

Associated Electrics

Associated Electrics RC10T3 Bedienungsanleitung

Associated Electrics

Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10 B44.2 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10 Worlds Car Kit Bedienungsanleitung

Associated Electrics

Associated Electrics TC5F Factory Team Bedienungsanleitung

Associated Electrics

Associated Electrics Ready-To-Run RIVAL MT8 Bedienungsanleitung

Associated Electrics

Associated Electrics REFLEX 14R HOONICORN 20178 Bedienungsanleitung

Associated Electrics

Associated Electrics APEX2 SPORT Bedienungsanleitung

Associated Electrics

Associated Electrics RC10T6.1 Team Kit Bedienungsanleitung

Associated Electrics

Associated Electrics DR10 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B6.2D KIT Bedienungsanleitung

Associated Electrics

Associated Electrics Mini MGT 3.0 Bedienungsanleitung

Associated Electrics

Associated Electrics RC8B4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B2 9000 Bedienungsanleitung

Associated Electrics

Associated Electrics Enduro Ecto Trail Truck ASC40117C Handbuch

Associated Electrics

Associated Electrics RC18LM RTR Bedienungsanleitung

Associated Electrics

Associated Electrics RC10T3 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10TC6.1-FT Bedienungsanleitung

Associated Electrics

Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC12LW Bedienungsanleitung

Associated Electrics

Associated Electrics SC10 Bedienungsanleitung

Associated Electrics

Associated Electrics ae RC8T3.1 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10T4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B6D Team Kit Bedienungsanleitung

Beliebte Motorisiertes Spielzeugauto Handbücher anderer Marken

Eduard

Eduard Humber Scout Car Mk.I exterior Bedienungsanleitung

Traxxas

Traxxas 4995X Bedienungsanleitung

Jamara

Jamara VW T1 Bus Bedienungsanleitung

REVELL

REVELL 68 CHEVY CHEVELLE SS 396 Bedienungsanleitung

Schumacher

Schumacher Pro Cat Bedienungsanleitung

Tamiya

Tamiya TT-01 TYPE E Bedienungsanleitung

Eduard

Eduard Krupp Protze 6x4 1/48 Bedienungsanleitung

New Bright

New Bright 61072UEP Bedienungsanleitung

Team Durango

Team Durango DEX410v5 Bedienungsanleitung

Jamara

Jamara Mercedes Actros Muldenkipper 2,4 GHz Bedienungsanleitung

PLAYMOBIL

PLAYMOBIL 9536 Bedienungsanleitung

Atomic

Atomic BZ3 Bedienungsanleitung

Aiyaplay

Aiyaplay 370-290V00 Bedienungsanleitung

Power Wheels

Power Wheels GRJ53 Bedienungsanleitung

ZEROTRIBE

ZEROTRIBE Zetricks ZT1144 Bedienungsanleitung

INJUSA

INJUSA 412 Bedienungsanleitung

Maverick

Maverick MSC-30BR-WP Bedienungsanleitung

Land of B.

Land of B. Rollin' Riders Bedienungsanleitung