Astra Peel-a-ton Bedienungsanleitung

Contents

1. Introduction ････････････････････････････････ P. 1

2. Safety Precautions ･････････････････････････ P. 1

3. Speci cations ･･････････････････････････････ P. 4

4. Names and Functions of Parts ････････････････ P. 5

5. Correct Use of the KA-700H ･･････････････････ P. 7

6. How to Operate the KA-700H ･････････････････ P. 8

7. How to Remove and Attach Parts ･････････････ P.10

8. Cleaning and Maintenance ･･････････････････ P.13

9. Holding Prongs ････････････････････････････ P.15

10. Peeler Blade ･･･････････････････････････････ P.18

11. Item Selection ･･････････････････････････････ P.20

12. Settings for Various Fruits and Vegetables ･････ P.27

13. Troubleshooting ････････････････････････････ P.36

14. In Conclusion ･･････････････････････････････ P.39

Remarks

● Thank you very much for purchasing the KA-700H Fruit Peeler.

● To ensure safe and correct operation of this unit, please read and understand the contents

of this manual before use.

● After reading this manual, keep it in a safe and accessible place for other users of the KA-

700H.

● In order to improve the performance of this product, the speci cations of the product or

this manual may be modi ed without prior noti cation.

Operation Manual

Fast, clean removal of peels

Electric Peeler

KA-700H

Peel-a-ton

AAM-K7H-01Rev.2001-EN

1. Introduction

● This appliance is specically designed to peel round and oval fruits and vegetables.

● Improper use of the unit may result in a breakdown or an accident.

● Before using the unit, read this manual carefully, and pay careful attention to inspection and maintenance

and also safety.

2. Safety Precautions

● Please read these instructions carefully before operating the peeler, and be sure to operate it correctly.

● Important safety items are set out on the following pages, so be sure and follow them.

● The following expressions are used in this manual:

This expression indicates a situation in which death or injury may re-

sult from improper use of equipment.

Warning!

Caution!

This expression indicates a situation in which injury and/or material

damage* may occur due to improper use of the equipment.

* Material damage may refer to any or all of the following: house and property, home furnishings, do-

mestic animals and pets.

1) This unit may only be operated by someone who has read and understood this operating

manual, and who can assume full responsibility for the safety of those nearby.

2) Use common sense. Do not operate the unit when fatigued, ill or physically impaired.

3) Do not operate the unit in a poorly lit (dark) or cluttered workspace.

4) Do not operate this unit while under the inuence of alcohol, medication or any other sub-

stance that might impair judgment and motor skills.

5) Wear proper work clothes when operating this unit.

Warning!

Failure to do so may result in an accident or injury.

An injury may result.

Do not wear baggy or loose clothing, gloves, a necklace or other accessories because these

items can become entangled in moving parts of the unit, resulting in possible injury.

A person with long hair must wear a hat or hair net when operating this equipment.

6) Do not allow children near this unit. Do not allow children to operate this unit.

7) Do not disassemble or attempt to repair or modify this unit.

8) If you detect anything unusual in the operation of the unit, do not continue to use it.

9) Always operate the unit on a level, stable surface.

10) Never move the unit while it is in operation.

11) Never allow water to contact the base of the unit.

12) Use ample care when touching the base of the unit.

13) Do not touch the stainless surfaces on the front of the unit.

14) Never touch any part (arm, holding prong) while the unit is in operation.

15) Handle the holding prong with adequate care.

Warning!

An accident may result.

An accident may result. Immediately have the machine inspected and repaired.

Operating the unit on an unstable surface may result in a breakdown or injury.

Always turn the power button “o󰀨” and unplug the power cord before relocating

the unit. Failure to do this may result in a breakdown or injury.

The base of the unit is NOT water resistant. Contact with water may result in an electric shock,

re or breakdown.

Always conrm that the unit is completely powered o󰀨 before touching any part

of it. Failure to do so may result in injury.

The unit will be hot, and may cause an injury.

Never touch the mounting prong while the peeler is in operation. Turn the main switch to

“OFF” before touching the prong. Failure to do so may result in serious injury.

The prong is very sharp. Use care when setting or replacing it.

Failure to exercise care may result in serious injury.

When xing the prong to the shaft, be sure to follow the instructions in this manual.

Failure to do so may result in injury and/or damage to the unit.

Always inspect the mounting prong before, during, and after using the unit, and ensure

that it is not broken or missing. If the prong or a part of it is found to be missing, all of the

peeled fruit must be inspected, or thrown out. If the prong is damaged in any way, do not

use it. Replace it.

Immediately after operation, the unit will be hot, and if touched may cause an injury.

Do not touch parts of the unit where there are protruding screws. This may result in an injury.

1) Use the power supply within the range of specications.

2) Handle the power cord with care.

3) Take care when plugging or unplugging the power cord.

4) Do not place an object on the unit, or lean or stand on it.

5) Upon taking delivery of the unit, check to see that no damage has occurred, and

no parts (screws, nuts, etc.) have come loose or separated in transit.

Injury or damage may result.

Operating the unit from a power source of other than the intended voltage, or using it

near a di󰀨erent voltage source or a source of electrical noise, may result in injury or dam-

age to the unit.

Caution!

Do not unplug the power cord using unreasonable force, damage it, shape it, bend it with

unreasonable force, or bunch it. Keep the cord away from a source of heat or oil, and do

not place anything heavy on it. Any of the above can result in an electrical shock, re, or

damage to the unit.

Never plug or unplug the power cord with wet hands. Before plugging or unplugging the

power cord, make sure that the power is switched “OFF.” Always unplug the power cord

by pulling the plug, not the cord. Failure to do so may result in an electrical shock, re or

damage to the equipment.

16) Use adequate caution when attaching and operating the peeler blade.

Warning!

Never touch the peeling blade while the unit is operating. Always turn the switch to “OFF”

before handling the peeling blade. Failure to do so may result in serious injury.

The peeling blade is extremely sharp. Use adequate care when replacing it.

Failure to do so may result in injury.

Always inspect the peeling blade before, during and after using the equipment to ensure

that it is not broken. If the blade is found to be broken, all peeled fruit must be inspected,

or thrown out. If the peeling blade is damaged in any way, do not use it. Replace it.

Failure to do so may result in injury or damage to the unit.

6) When storing or operating the unit, observe the following precautions.

1. Temperature and humidity: Store at 0 – 30°C, and relative humidity below 85%.

2. Place the unit on a rm, level oor.

3. Keep away from salt air, ammable or corrosive gases, radiation, high heat or humidity, sulfur

smoke, and other pollutants.

4. Keep away from oil and oil smoke.

5. Keep away from mist or moisture.

6. Keep away from direct sunlight.

7. Take steps to prevent the entry of insects, rodents, etc.

8. Install in a well-ventilated indoor location.

Caution!

Failure to observe the below precautions may result in damage to the unit.

3. Specications

Power 100 V~130 VAC/200 V~240 VAC (50Hz/60Hz)

Power consumption 150 W

External Dimensions W270 mm D300 mm H127 mm

Total weight 6 kg

External case material ABS plastic

●Conrm that the following standard attachments have been provided.

To obtain replacement parts, contact your retailer or ASTRA.

No. Name Check

1. Holding prong x 3 (HP–M3, HP–MB, HP–MO)

2. Holding prong clips x 3 (CP–P)

3. Arm x 1

4. Peeler blades x 4 (F–3, S–1, S–2, S–3)

5. Spring x 1 (SP–S)

6. Spring holder x 1

7. Spring holder clip x 1 (CP–S)

* The holding prongs (1) and peeler blades (4) are provided for di󰀨erent sizes and types of

fruit skins.

4. Names and Functions of Parts

1) Control Panel

* When a button is in the ready mode, the border around it will light up in blue.

No. Name Function Reference page(s)

1. Start/stop button

The operation of the start/stop button di󰀨 ers according to the following

conditions.

Pressing and holding down the button will power up the unit, and

initiate the reset mode.

Press and hold down the button (for more than 2 seconds) in the item

selection mode to enter the specify setting mode.

Press the start/stop button to select a preferred setting.

Ready mode: Press the start/stop button to commence peeling. Note:

operation changes depending on the peeling mode.

During peeling: Press to stop peeling, and place in the “Ready” mode.

Reference pages:

7~10, 20~22

2. Menu button Holding down the standby cancel button for more than two seconds will

return the operating status to the item selection screen.

Reference pages:

8, 20

3. Peeling thickness

adjustment buttons

These buttons adjust the peeling action according to the thickness of

the peel. These buttons are used to perform adjustment in ten steps (0

to 9) which are displayed as bars on the screen.

Press the “ ” button to reduce the number of passes and increase

the peeling thickness.

Press the “ ” button to increase the number of passes and reduce

the peeling thickness.

Reference pages:

20~22

4. Spin speed adjust-

ment buttons

These buttons adjust the speed of item rotation (holding prong spin

speed.) Six available speeds are indicated by bars on the display.

The small arrow “ ” reduces the spin speed; the large arrow “ ”

increases the spin speed.

Reference pages:

20, 23~26

2) Mechanical parts

No. Name of part Function Reference page

1. Peeler blade Replaceable parts Select according to the item to be peeled. Reference pages:

11, 18, 19, 27~35

2. Arm The arm is shown above in the “start” position. (A “Click” sound indi-

cates that the arm has settled in the correct position.)

Reference page:

3. Spring Replaceable part. Reference pages:

10, 11

4. Holding prong Replaceable part. Select the type according to the item to be peeled.

Fixes and rotates the fruit or vegetable to be peeled.

Reference pages:

12, 15~17, 21~35

3) Back of unit

No. Name of part Function Reference page

1. Power switch Powers the unit on or o󰀨 .

2. Power connection Built-in cord (2.5m)

3. Fuse 250 VAC, 3 A

5. Correct Use of the KA-700H

1) Pre-operation preparation

• In order to prevent a possible electric shock please connect a ground fault interrupter to this unit.

• Install the unit in a well-lit area free of clutter or obstacles.

• When using an extension cord, conrm that the cord is undamaged. Use a 1500W rated extension

cord. The cord should be as short as possible.

• Place the machine on a stable, level surface, with a container below to collect the peelings.

Install the unit as

far forward on the

supporting surface

as possible.

Rubber foot

• After conrming that the power switch is “o󰀨”, plug the power cord into a power outlet.

2) Pre-operation inspection

● Check to see that the holding prong is properly attached. ( See page 12)

Caution!

If the prong is not properly tted to the unit, there is a danger

that it will come into contact with the peeler blade, damaging

both of these parts.

• Check that the holding prong is free of damage. If it is bent, or makes a rattling noise, it must be

repaired or replaced.

• Check that the peeling blade is free of damage. If the blade is dented or bent, it must be replaced.

( See page 11)

• Check to see that the arm is correctly attached. If it is not, the peeler will not function properly.

( See page 10)

Caution!

If the arm is not attached correctly, it may contact the holding

prong, causing damage to these parts.

• Be sure that the arm is in the correct starting position. If the arm is not in the correct starting posi-

tion, the peeler will not start when the start button is pressed. Always start the peeler with the arm

in the correct starting position. ( See page 10)

6. How to Operate the KA-700H

1) Turn the power switch “On.” ( See page 6)

• “Astra KA-700H” will be displayed on the operation screen, followed by the Settings Menu.

• Pressing and holding down the start/stop button while all buttons on the display are o󰀨 will put

the unit in the reset mode. ( See page 21)

Use the start/stop button to choose the settings for the type of item to be peeled. (See page 20)

• Pressing the button and holding it down changes the display screen to the detailed settings.

( See page 22)

• If “Arm position wrong – correct” is displayed, return the arm to the correct starting position, and

press the start/stop button again.

3) A󰀩x the item to be peeled (fruit or vegetable) to the holding prong.

• A󰀩x the item so that the prong penetrates the center (core) of the fruit.

• A󰀩x the item so that it touches the base of the prong.

Caution!

If a peeling operation is started when no item is a󰀩xed to the

holding prong, contact will occur between peeler blade and

prong, damaging both of these parts.

4) Press the start/stop button.

• Method of operation changes depending on the start mode. ( See page 9)

• Starts the peeling. Light of the menu button will turn o󰀨. During the peeling, start/stop button

ashes.

• If the start/stop button is pressed during peeling, the peeling operation will stop.

5) Remove the item from the holding prong.

If you continue peeling with the same type of item, go back to 3) and repeat.

* If you wish to change the type of peeling item, press down the menu button two seconds to get back to

the item selection screen.

Change of peeling operation

1) Safety Mode (Default)

Safety Mode avoids unexpected misoperation.

Start button will ash on the rst push, then the peeling starts on second push.

Two push

Flash ① Insert fruit

② Press Start Two times

(returns to standby mode when the second push is delayed)

2) One-Push Mode

Immidiately starts the peeling. Start button always lighting.

① Insert fruit

② Press Start

One push

Light

Caution!

Please be careful of starting with nothing inserted.

3) Changing Mode

Press the start button for three seconds.The mode switches.

"SAFETY MODE" or "ONE-PUSH MODE" will be displayed.

Press start one more time to go back to standby.

(Peeling Mode will be shown after item choosing too.)

* “All Reset” in the reset settings makes the unit back to safety mode. ( See page 21)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Astra Industrieanlagen Handbücher

Astra

Astra Peel-A-Ton XL Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung