Asus Aaeon UP Core AL Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Andere Asus Chassis Handbücher

Asus

Asus 1U Rackmount Chassis Kit R10-A2P4 Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung

1

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Assembly SOP EP-CHUPCMTVAUPC

UP Core AL Chassis

Exploding View:

2

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Parts List

The kit includes the following items:

•Heatsink top cover @1pc

•Middle base @1pc

•Bottom @1pc

•Thermal Pad @4pcs

•VESA Mount/Din Rail Plate @1pc

•M2.5*6 screws. @4pcs

•M2.5*8 screws. @4pcs

•Hex Standoff @4pcs

•Din rail screws kit M3*6@1pcs & M3*8@2pc

•Vesa screws- Pan screw M3*8 @4pcs

•SMA plug @1pcs

Not included with the kit, you may need to prepare:

•UP Core board

•Din Rail Clip 20mm

3

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Package of main housing:

4

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Package of Din Rail /VESA Plate:

5

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Assembly main housing:

1. In order to start with the assembly of your UP Core Metal Housing, start by first removing the

heatsink from the motherboard. The following link provides a overview on how to remove the

heatsink: https://wiki.up-community.org/How_to_remove_heatsink

The picture below shows the result of the heatsink removal.

6

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

2. Place the heatsink top cover upside down and stick the thermal pads on the four blocks with the

blue films facing up.

3. Peel of the blue films of the thermal pads.

7

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

4. Re-assemble the heatsink top cover with the middle base first.

5. Carefully place the UP Core board on the 4 studs, and press the board softly into its place.

8

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

6. Fasten the UP Core Board to the top cover with the hex standoffs through the thread nuts.

7. Place the bottom base on the middle base and fasten it with the M2.5*6 screws.

9

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

8. Check if the sides exactly match the IO sides.

9. The finished chassis:

10

©AAEON Europe BV –Confidential –All Rights Reserved

06/02/18

Optional: Assembly main housing with Din Rail/VESA Plate

1. In case you will use the VESA Plate, you will need to replace the M2.5*6 screws mounted in the

housing and replace them for M2.5*8 screws, which are in the Package of the Din Rail / VESA

Plate.