Asus PE200U Series Bedienungsanleitung

Connect ASUS-PE200U-FaceRecognition device

to your Azure IoT services

Table of Contents

Introduction

Prerequisites

Prepare the Device

Integration with Azure IoT Explorer

Connect to Azure IoT Central

Additional Links

Introduction

About this document

This document describes how to connect ASUS-PE200U-FaceRecognition to Azure IoT Hub using the

Azure IoT Explorer with certified device application and device models.

IoT Plug and Play certified device simplifies the process of building devices without custom device

code. Using Solution builders can integrated quickly using the certified IoT Plug and Play enabled

device based on Azure IoT Central as well as third-party solutions.

This getting started guide provides step by step instruction on getting the device provisioned to

Azure IoT Hub using Device Provisioning Service (DPS) and using Azure IoT Explorer to interact with

device's capabilities.

ASUS PE200U is an Intelligent Edge Computer with a high-quality, TCO-optimized solution for AIoT

computing. PE200U includes up to 6 COM ports(2 x RS-232/422/485) and supports dual display

configuration by multiple interfaces: HDMI/DP and integrated CPU.

ASUS-PE200U-FaceRecognition has built-in a facial recognition SW in UWP UI Interface, user can key-

in their azure connection information or optimize some configuration by the UI interface. Users can

obtain the result of the recognition and access control information.

Prerequisites

You should have the following items ready before beginning the process:

Azure Account

Azure IoT Hub Instance

Azure IoT Hub Device Provisioning Service

Azure IoT Public Model Repository

Prepare the Device.

Hardware Environmental setup

Prepare ASUS-PE200U-FaceRecognition, USB Camera.

Connect the power adapter, HDMI, USB Camera with ASUS-PE200U-FaceRecognition.

Power on the ASUS-PE200U-FaceRecognition

Connect to the network.

Software Environmental setup

The UWP app and other software for face recognition have been preinstalled on the platform, it

will start as soon as the device is turned on.

Prepare IoT Hub and DPS configuration

Please refer to this tutorial to complete the following procedures :

1. Use Azure commands or Azure portal to create a Resource Group、an Iot Hub and a Device

Provisioning Service

2. To link the DPS instance to your IoT hub

3. To create your device by individual device enrollment in your DPS instance.

4. Make a note of the DPS information (DPS endpoint/Registration ID/ID Scope/Symmetric key).

5. Set the DPS information got from the former step to the UWP app.

Integration with Azure IoT Explorer

Connect to your IoT hub

The first time you run Azure IoT explorer, you're prompted for your IoT hub's connection string.

After you add the connection string, select Connect.

View devices

After the tool connects to your IoT hub, it displays the Devices list page that lists the device

identities registered with your IoT hub. You can select any entry in the list to see more

information.

Interface

Properties

Commands

Telemetry

Press the device name and choose the Telemetry Page. Press Start and wait a momnent. You will see

the telemetry data on the screen.

Connect to Azure IoT Central

1. Create an application

Please refer to this tutorial to create a "Custom application" template.

2. Create a device template from the device catalog

Please refer to this tutorial to create the ASUS-PE200U-FaceRecognition device template.

3. Add a device

Add a new device under ASUS-PE200U-FaceRecognition device template. Make a note of the device

ID.

4. Get connection information

ID scope : In your IoT Central application, navigate to Administration > Device Connection. Make

a note of the ID scope value.

Group primary key : In your IoT Central application, navigate to Administration > Device

Connection > SAS-IoT-Devices. Make a note of the shared access signature Primary key value.

Use the Cloud Shell to generate a device specific key from the group SAS key you just retrieved using

the Azure CLI.

az extension add --name azure-iot

az iot central device compute-device-key --device-id --pk

Make a note of the generated device key, and the ID scope for this application and set it from the

UWP app.

Additional Links

Please refer to the below link for additional information for Plug and Play

Manage cloud device messaging with Azure-IoT-Explorer

Import the Plug and Play model

Configure to connect to IoT Hub

How to use IoT Explorer to interact with the device

Andere Handbücher für PE200U Series

Inhaltsverzeichnis

Andere Asus Computerhardware Handbücher

Asus

Asus LSISAS RAID Card PIKE 1064E Bedienungsanleitung

Asus

Asus Aaeon BOXER-6641 Bedienungsanleitung

Asus

Asus PIKE 2108 Bedienungsanleitung

Asus

Asus AAEON BOXER-8622AI Bedienungsanleitung

Asus

Asus AAEON BOXER-6652 Bedienungsanleitung

Asus

Asus AAEON GENE-APL7 A11 Bedienungsanleitung

Asus

Asus ROG STRIX LC RGB Series Bedienungsanleitung

Asus

Asus Vintage2-AE1 Bedienungsanleitung

Asus

Asus X-Mars Lite Bedienungsanleitung

Asus

Asus USB-BT211 Mini Bluetooth Dongle Bedienungsanleitung

Asus

Asus Aaeon UP Xtreme i11 EDGE Bedienungsanleitung

Asus

Asus Aaeon de next-TGU8 Bedienungsanleitung

Asus

Asus Q16328 Bedienungsanleitung

Asus

Asus TPM-M R2.0 Bedienungsanleitung

Asus

Asus My Cinema-EHD3-100 Bedienungsanleitung

Asus

Asus SCSI 320-0 Bedienungsanleitung

Asus

Asus Aaeon BOXER-6646-ADP Bedienungsanleitung

Asus

Asus ADD2 Bedienungsanleitung

Asus

Asus Aaeon UPN Edge Pro Bedienungsanleitung

Asus

Asus AAEON BOXER-8233AI Bedienungsanleitung

Asus

Asus PIKE 2008 IMR Bedienungsanleitung

Asus

Asus AAEON NET-PLUS Bedienungsanleitung

Asus

Asus CMI8330 Bedienungsanleitung

Asus

Asus TUF GAMING LC 240 ARGB Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung