Asus PIKE 9230 Bedienungsanleitung

PIKE 9230

SATA RAID card

E7442

First Edition

June 2012

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Contents ...................................................................................................... iii

Notices......................................................................................................... iv

Safety information ....................................................................................... v

About this guide ......................................................................................... vi

PIKE 9230 specications summary ........................................................ viii

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-2

1.2 Package contents......................................................................... 1-2

1.3 Card layout ................................................................................... 1-3

1.4 System requirements................................................................... 1-3

1.5 Card installation........................................................................... 1-4

Chapter 2: Driver installation

2.1 RAID driver installation ............................................................... 2-2

2.1.1 Creating a RAID driver disk ............................................ 2-2

2.1.2 Windows®OS.................................................................. 2-4

2.2 Support CD information .............................................................. 2-6

2.2.1 Running the support CD ................................................. 2-6

2.2.2 Utilities menu .................................................................. 2-6

2.2.3 Make disk........................................................................ 2-7

2.2.4 Manual ............................................................................ 2-7

2.2.5 Contact information......................................................... 2-8

Chapter 3: RAID conguration

3.1 Setting up RAID............................................................................ 3-2

3.1.1 RAID denitions .............................................................. 3-2

3.1.2 Installing hard disk drives................................................ 3-2

3.2 Marvell®Storage Utility (MSU) .................................................... 3-3

3.2.1 Enabling Active Scripting or Javascript ........................... 3-3

3.2.2 Launching MSU .............................................................. 3-4

3.2.3 Using the MSU interface ................................................. 3-5

3.3 Marvell RAID BIOS setup utility ................................................. 3-8

3.3.1 Create a RAID Array ....................................................... 3-8

3.3.2 Delete an existing RAID Array ...................................... 3-10

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with manufacturer’s instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

DO NOT throw the motherboard in municipal waste. This product has been designed to

enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin

indicates that the product (electrical and electronic equipment) should not be placed in

municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This

symbol of the crossed out wheeled bin indicates that the battery should not be

placed in municipal waste.

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the server.

•

When adding or removing devices to or from the server, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing server

before you add a device.

•

Before connecting or removing signal cables from the server, ensure that all

power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Ensure that your power supply is set to the correct voltage in your area.

If you are not sure about the voltage of the electrical outlet you are using,

contact your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

Operation safety

•

Before installing any component to the server, carefully read all the manuals

that came with the package.

•

Before using the product, ensure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

About this guide

This user guide contains the information you need when installing and conguring

the server management board.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter offers the ASUS PIKE 9230 SATA RAID card features and the

new technologies it supports.

• Chapter 2: RAID conguration

This chapter provides instructions on setting up, creating, and conguring

RAID sets using the available utilities.

• Chapter 3: Driver installation

This chapter provides instructions for installing the RAID drivers on different

operating systems.

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

vii

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Example: <Ctrl+M>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in brackets.

Example: At the DOS prompt, type the command line:

format a:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

viii

PIKE 9230 specications summary

* Specications are subject to change without notice.

Chipset Marvell 88SE9230

Interface ASUS PIKE interface

Ports 4 ports

RAID levels RAID 0 / RAID1 / RAID10

Devices supported SATA 3 / SATA 2 / SATA devices

Data transfer rate SATA 1.5 Gb/s, SATA 3 Gb/s, SATA 6 Gb/s

Form factor 6.44 in x 1.57 in (1U compatible)

Chapter 1: Product

introduction

This chapter offers the ASUS PIKE 9230

RAID card features and the new

technologies it supports.

1-2 Chapter 1: Product introduction

1.1 Welcome!

Thank you for buying an ASUS®PIKE 9230 RAID card!

The ASUS PIKE 9230 allows you to create RAID 0, RAID 1, and RAID 10 set(s)

from SATA hard disk drives connected to the SATA connectors on the motherboard

Before you start installing the RAID card, check the items in your package with the

list below.

If any of the above items is damaged or missing, contact your retailer.

1.2 Package contents

Check your package for the following items.

• ASUS PIKE 9230 RAID card

• Support DVD

• User guide

Inhaltsverzeichnis

Andere Asus Computerhardware Handbücher

Asus

Asus LSISAS RAID Card PIKE 1064E Bedienungsanleitung

Asus

Asus AAEON GENE-APL7 Bedienungsanleitung

Asus

Asus PIKE 1078 Bedienungsanleitung

Asus

Asus WL-120 Bedienungsanleitung

Asus

Asus AGP-V3100 Bedienungsanleitung

Asus

Asus AAEON BOXER-6652 Bedienungsanleitung

Asus

Asus AAEON UP-POEV2-30W Bedienungsanleitung

Asus

Asus AAEON FWS-7840 Bedienungsanleitung

Asus

Asus V52 Bedienungsanleitung

Asus

Asus AAEON UP Xtreme i12 Bedienungsanleitung

Asus

Asus AAEON UP Xtreme i12 Edge Bedienungsanleitung

Asus

Asus PE200U Series Bedienungsanleitung

Asus

Asus Aaeon BOXER-8641AI Bedienungsanleitung

Asus

Asus LSISAS RAID Card PIKE 1064E Bedienungsanleitung

Asus

Asus MiraCast Q8596 Bedienungsanleitung

Asus

Asus AAEON GENE-KBU6 Bedienungsanleitung

Asus

Asus AAEON GENESYS-KBU6 Bedienungsanleitung

Asus

Asus AAEON GENESYS-CML5 Bedienungsanleitung

Asus

Asus ROG Front Base Bedienungsanleitung

Asus

Asus ThunderboltEX II Bedienungsanleitung

Asus

Asus SpaceLink Bedienungsanleitung

Asus

Asus PIKE 2008 IMR Bedienungsanleitung

Asus

Asus AAEON BOXER-8233AI Bedienungsanleitung

Asus

Asus Q16328 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung