Asus CROSSHAIR Administratorhandbuch

Debug Code Table 1

Debug Code Table

Code Description

CPU INIT CPU Initiation

DET CPU Test CMOS R/W functionality.

CHIPINIT

Early chipset initialization:

-Disable shadow RAM

-Disable L2 cache (socket 7 or below)

-Program basic chipset registers

DET DRAM

Detect memory

-Auto-detection of DRAM size, type and ECC.

-Auto-detection of L2 cache (socket 7 or below)

DC FCODE Expand compressed BIOS code to DRAM

EFSHADOW Call chipset hook to copy BIOS back to E000 & F000 shadow RAM.

DC XCODE Expand the Xgroup codes locating in physical address 1000:0

INIT IO Initial Superio_Early_Init switch.

CLR SCRN 1. Blank out screen

2. Clear CMOS error ag

INIT8042 1. Clear 8042 interface

2. Initialize 8042 self-test

ENABLEKB 1. Test special keyboard controller for Winbond 977 series Super I/O chips.

2. Enable keyboard interface.

DIS MS

1. Disable PS/2 mouse interface (optional).

2. Auto detect ports for keyboard & mouse followed by a port & interface

swap (optional).

3. Reset keyboard for Winbond 977 series Super I/O chips.

R/W FSEG Test F000h segment shadow to see whether it is R/W-able or not. If test

fails, keep beeping the speaker.

DET FLASH Auto detect ash type to load appropriate ash R/W codes into the run time

area in F000 for ESCD & DMI support.

TESTCMOS Use walking 1’s algorithm to check out interface in CMOS circuitry. Also set

real-time clock power status, and then check for override.

PRG CHIP Program chipset default values into chipset. Chipset default values are

MODBINable by OEM customers.

INIT CLK Initial Early_Init_Onboard_Generator switch.

CHECKCPU Detect CPU information including brand, SMI type (Cyrix or Intel) and CPU

level (586 or 686).

INTRINIT

Initial interrupts vector table. If no special specied, all H/W

interrupts are directed to SPURIOUS_INT_HDLR & S/W interrupts to

SPURIOUS_soft_HDLR.

REC MPS Initial EARLY_PM_INIT switch.

Reserved Load keyboard matrix (notebook platform)

Reserved HPM initialization (notebook platform)

SET FDD

1. Check validity of RTC value:

e.g. a value of 5Ah is an invalid value for RTC minute.

2. Load CMOS settings into BIOS stack. If CMOS checksum fails, use

default value instead.

3. Prepare BIOS resource map for PCI & PnP use. If ESCD is valid, take

into consideration of the ESCD’s legacy information.

4. Onboard clock generator initialization. Disable respective clock resource

to empty PCI & DIMM slots.

5. Early PCI initialization:

-Enumerate PCI bus number

-Assign memory & I/O resource

-Search for a valid VGA device & VGA BIOS, and put it nto C000:0.

INITINT9 Initialize INT 09 buffer

2 Debug Code Table

CPUSPEED

1. Program CPU internal MTRR (P6 & PII) for 0-640K memory address.

2. Initialize the APIC for Pentium class CPU.

3. Program early chipset according to CMOS setup. Example: onboard IDE

controller.

4. Measure CPU speed.

5. Invoke video BIOS.

TESTVRAM

1. Initialize multi-language

2. Put information on screen display, including Award title, CPU type, CPU

speed .

RESET KB Reset keyboard except Winbond 977 series Super I/O chips.

8254TEST Test 8254

8259MSK1 Test 8259 interrupt mask bits for channel 1.

8259MSK2 Test 8259 interrupt mask bits for channel 2.

8259TEST Test 8259 functionality.

Reserved Initialize EISA slot

COUNTMEM 1. Calculate total memory by testing the last double word of each 64K page.

2. Program write allocation for AMD K5 CPU.

MP INIT

1. Program MTRR of M1 CPU

2. Initialize L2 cache for P6 class CPU & program CPU with proper

cacheable range.

3. Initialize the APIC for P6 class CPU.

4. On MP platform, adjust the cacheable range to smaller one in case the

cacheable ranges between each CPU are not identical.

USB INIT Initialize USB

TEST MEM Test all memory (clear all extended memory to 0)

SHOW MP Display number of processors (multi-processor platform)

PNP LOGO

1. Display PnP logo

2. Early ISA PnP initialization

-Assign CSN to every ISA PnP device.

Reserved Initialize the combined Trend Anti-Virus code.

SHOW EZF (Optional Feature)

Show message for entering AWDFLASH.EXE from FDD (optional)

ONBD IO 1. Initialize Init_Onboard_Super_IO switch.

2. Initialize Init_Onbaord_AUDIO switch.

EN SETUP Okay to enter Setup utility; i.e. not until this POST stage can users enter the

CMOS setup utility.

MSINSTAL Initialize PS/2 Mouse

CHK ACPI Prepare memory size information for function call: INT 15h ax=E820h

EN CACHE Turn on L2 cache

SET CHIP Program chipset registers according to items described in Setup & Auto-

conguration table.

AUTO CFG

1. Assign resources to all ISA PnP devices.

2. Auto assign ports to onboard COM ports if the corresponding item in

Setup is set to “AUTO”.

INIT FDC 1. Initialize oppy controller

2. Set up oppy related elds in 40:hardware.

CUTIRQ12

(Optional Feature)

Enter AWDFLASH.EXE if :

-AWDFLASH is found in oppy drive.

-ALT+F2 is pressed

DET IDE Detect & install all IDE devices: HDD, LS120, ZIP, CDROM…..

COM/LPT Detect serial ports & parallel ports.

DET FPU Detect & install co-processor

Debug Code Table 3

CPU CHG CPU change

CPR FAIL CPR error

FAN FAIL Fan error

UCODEERR UCODE error

FLOPYERR Floppy error

KB ERROR Keyboard error

HD ERR HDD error

CMOS ERR CMOS error

MS ERROR Mouse error

80P ERR 80 port error

BOOT CHG Boot device change

SMARTERR HDD smart function error

HM ERROR Hard monitor error

AINETERR AI NET error

CASEOPEN Case open

PASSWORD

Clear EPA or customization logo.

1. Call chipset power management hook.

2. Recover the text fond used by EPA logo (not for full screen logo)

3. If password is set, ask for password.

MEM2CMOS Save all data in stack back to CMOS

INIT PNP

USB FINAL

Initialize ISA PnP boot devices

1. USB nal Initialization

2. NET PC: Build SYSID structure

3. Switch screen back to text mode

4. Set up ACPI table at top of memory.

5. Invoke ISA adapter ROMs

6. Assign IRQs to PCI devices

7. Initialize APM

8. Clear noise of IRQs.

READ HDD

BOOTMENU

Read HDD boot sector information for Trend Anti-Virus code

1. Enable L2 cache

2. Program boot up speed

3. Chipset nal initialization.

4. Power management nal initialization

5. Clear screen & display summary table

6. Program K6 write allocation

7. Program P6 class write combining

NUM LOCK 1. Program daylight saving

2. Update keyboard LED & typematic rate

UPDT DMI

1. Build MP table

2. Build & update ESCD

3. Set CMOS century to 20h or 19h

4. Load CMOS time into DOS timer tick

5. Build MSIRQ routing table.

INT 19H Boot attempt (INT 19h)

Andere Handbücher für CROSSHAIR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus P4V8X-X Bedienungsanleitung

Asus

Asus K7V Bedienungsanleitung

Asus

Asus KFSN5-D Bedienungsanleitung

Asus

Asus P5A-VM Bedienungsanleitung

Asus

Asus H110I Bedienungsanleitung

Asus

Asus Prime B350M-K Bedienungsanleitung

Asus

Asus A7S333 Bedienungsanleitung

Asus

Asus P5P800S Bedienungsanleitung

Asus

Asus P3B-1394 Bedienungsanleitung

Asus

Asus E45M1-M PRO Bedienungsanleitung

Asus

Asus STRIX H270F GAMING Bedienungsanleitung

Asus

Asus A7V8X-LA Kelut Bedienungsanleitung

Asus

Asus P8Z68 DELUXE Bedienungsanleitung

Asus

Asus TUF B365M-PLUS GAMING Bedienungsanleitung

Asus

Asus Z97I-PLUS Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

Asus

Asus P4SP-MX SE Bedienungsanleitung

Asus

Asus Z10PC-D8 Series Bedienungsanleitung

Asus

Asus A58M-A/USB3 Bedienungsanleitung

Asus

Asus ROG STRIX H470-I GAMING Bedienungsanleitung

Asus

Asus A7V8X-X Bedienungsanleitung

Asus

Asus M4A78-VM IN SI Bedienungsanleitung

Asus

Asus Motherboard AP130-E1 Bedienungsanleitung

Asus

Asus CorLiving Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung