Asus ITX 220 - Motherboard - Mini ITX Bedienungsanleitung

Motherboard

ITX-220

E4855

Second Edition V2

June 2009

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK Computer Inc. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Notices.......................................................................................................... v

Safety information ...................................................................................... vi

About this guide ........................................................................................ vii

ITX-220 specications summary............................................................. viii

Chapter 1: Product introduction

1.1 Before you proceed ..................................................................... 1-1

1.2 Motherboard overview................................................................. 1-2

1.2.1 Motherboard layout ......................................................... 1-2

1.2.2 Layout contents............................................................... 1-2

1.3 Central Processing Unit (CPU) ................................................... 1-3

1.4 System memory ........................................................................... 1-4

1.4.1 Overview ......................................................................... 1-4

1.4.2 Memory congurations.................................................... 1-4

1.5 Expansion slot.............................................................................. 1-6

1.5.1 Installing an expansion card ........................................... 1-6

1.5.2 Conguring an expansion card ....................................... 1-6

1.5.3 PCI slot ........................................................................... 1-6

1.6 Jumpers ........................................................................................ 1-7

1.7 Connectors ................................................................................... 1-8

1.7.1 Rear panel connectors.................................................... 1-8

1.7.2 Internal connectors ......................................................... 1-9

1.8 Software support........................................................................ 1-14

1.8.1 Installing an operating system ...................................... 1-14

1.8.2 Support DVD information .............................................. 1-14

Chapter 2: BIOS information

2.1 Managing and updating your BIOS ............................................ 2-1

2.1.1 ASUS Update utility ........................................................ 2-1

2.1.2 ASUS EZ Flash 2 utility................................................... 2-2

2.1.3 ASUS CrashFree BIOS 3 utility ...................................... 2-3

2.2 BIOS setup program .................................................................... 2-4

2.3 Main menu .................................................................................... 2-5

2.3.1 System Time ................................................................... 2-5

2.3.2 System Date ................................................................... 2-5

2.3.3 SATA 1/SATA 2 .................................................................................2-5

Contents

2.3.4 Storage Conguration ..................................................... 2-6

2.3.5 System Information ......................................................... 2-6

2.4 Advanced menu ........................................................................... 2-7

2.4.1 JumperFree Conguration .............................................. 2-7

2.4.2 TPM Conguration .......................................................... 2-7

2.4.3 USB Conguration .......................................................... 2-8

2.4.4 CPU Conguration .......................................................... 2-9

2.4.5 Chipset............................................................................ 2-9

2.4.6 Onboard Devices Conguration.................................... 2-10

2.4.7 PCI PnP ........................................................................ 2-10

2.5 Power menu................................................................................ 2-11

2.5.1 Suspend Mode...............................................................2-11

2.5.2 ACPI 2.0 Support ...........................................................2-11

2.5.3 ACPI APIC Support........................................................2-11

2.5.4 APM Conguration........................................................ 2-12

2.5.5 Hardware Monitor ......................................................... 2-12

2.6 Boot menu .................................................................................. 2-13

2.6.1 Boot Device Priority ...................................................... 2-13

2.6.2 Boot Settings Conguration .......................................... 2-13

2.6.3 Security ......................................................................... 2-14

2.7 Tools menu ................................................................................. 2-16

2.7.1 AI NET 2........................................................................ 2-16

2.7.2 ASUS EZ Flash 2.......................................................... 2-16

2.8 Exit menu.................................................................................... 2-16

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with manufacturer’s instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

This class B digital apparatus complies with Canadian ICES-003.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of

Chemicals) regulatory framework, we published the chemical substances in our products at

ASUS REACH website at http://green.asus.com/english/REACH.htm.

The use of shielded cables for connection of the monitor to the graphics card is required

to assure compliance with FCC regulations. Changes or modications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority

to operate this equipment.

DO NOT throw the motherboard in municipal waste. This product has been designed to

enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin

indicates that the product (electrical and electronic equipment) should not be placed in

municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol

of the crossed out wheeled bin indicates that the battery should not be placed in municipal

waste.

Safety information

Electrical safety

•

To prevent electric shock hazard, disconnect the power cable from the electric outlet

before relocating the system.

•

When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

•

Before connecting or removing signal cables from the motherboard, ensure that all

power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

•

Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

•

If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

•

The optical S/PDIF is an optional component (may or may not be included in your

motherboard) and is dened as a CLASS 1 LASER PRODUCT.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read all the manuals

that came with the package.

•

Before using the product, ensure that all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

INVISIBLE LASER RADIATION, AVOID EXPOSURE TO BEAM.

• Never dispose of the battery in re. It could explode and release harmful substances into

the environment.

• Never dispose of the battery with your regular household waste. Take it to a hazardous

material collection point.

• Never replace the battery with an incorrect battery type.

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

• DISPOSE OF USED BATTERIES ACCORDING TO THE ABOVE BATTERY-RELATED

INSTRUCTIONS.

vii

DANGER/WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

NOTE: Tips and additional information to help you complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Example: <Ctrl>+<Alt>+<D>

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it

supports.

• Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus.

Detailed descriptions of the BIOS parameters are also provided.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Where to nd more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software

products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the

standard package.

viii

ITX-220 specications summary

(continued on the next page)

CPU Integrated Intel®Celeron®220 processor

Supports Intel®EM64T technology

Chipset Northbridge: Intel®945GC

Southbridge: Intel®ICH7

CPU Fan Fan Dimensions: 40 x 40 x10mm

Rated Speed: 5000 ± 10% RPM

Rated Voltage: DC 12V

Maximum Air Flow: 5.57 CFM

Noise Level: 25.3 dBA (Max. 27.5 dBA)

Front Side Bus 533 MHz

Memory Dual channel memory architecture

- 2 x 240-pin DIMM sockets support unbuffered

non-ECC 533 MHz DDR2 memory modules

- Supports up to 4GB system memory

* Refer to www.asus.com or this user manual for the

Memory QVL (Qualied Vendors Lists).

** When you install a total memory of 4GB capacity

or more, Windows®32-bit operating system may only

recognize less than 3GB. We recommend a maximum

of 3GB system memory if you are using a Windows®

32-bit operating system.

Graphics Integrated Intel®Graphics Media Accelerator 950

Supports D-Sub with max. resolution of 2048 x 1536 x

32 Bpp @75Hz

Maximum shared memory of 224MB

Expansion slot 1 x PCI slot

Storage Intel®ICH7 SouthBridge supports:

- 2 x Serial ATA 3Gb/s ports

Audio VIA VT1705 High Denition Audio 6-channel CODEC

LAN Realtek®PCIe Gb LAN controller

USB Supports up to 6 USB 2.0/1.1 ports (2 ports at mid-board,

4 ports at back panel)

ASUS special features ASUS CrashFree BIOS 3

ASUS EZ Flash 2

ASUS MyLogo 2™

ASUS AI NET 2

Rear panel ports 1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x VGA port

1 x COM port

1 x LAN (RJ-45) port

4 x USB 2.0 ports

6-channel audio I/O ports

ITX-220 specications summary

*Specications are subject to change without notice.

Internal connectors 1 x USB connector supports additional 2 USB ports

1 x Speaker connector

2 x Serial ATA connectors

1 x Chassis fan connector

1 x Chassis intrusion connector

1 x CPU fan connector

1 x TPM connector (optional)

1 x System panel connector

1 x High denition front panel audio connector

1 x 24-pin EATX power connector

1 x 4-pin ATX 12V power connector

BIOS features 8 Mb Flash ROM, AMI BIOS, PnP, DMI v2.0, WfM 2.0,

SMBIOS 2.5, ACPI v2.0a

Accessories 1 x Serial ATA cable

1 x I/O shield

Support DVD contents Drivers

ASUS PC Probe II

ASUS Update

Anti-virus software (OEM version)

User Manual

Form Factor Mini ITX form factor: 6.75 in x 6.75 in (17.1cm x 17.1cm)

ASUS ITX-220 1-1

Chapter 1

Product introduction

If any of the items is damaged or missing, contact your retailer.

Thank you for buying an ASUS®ITX-220 motherboard!

Before you start installing the motherboard, and hardware devices on it, check the items in

your motherboard package. Refer to page ix for the list of accessories.

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due to

static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that the system

is ON, in sleep mode, or in soft-off mode. This is a reminder that you must shut down

the system and unplug the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard LED.

Andere Handbücher für ITX 220 - Motherboard - Mini ITX

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus M4N78-AM V2 Bedienungsanleitung

Asus

Asus Z97M-PLUS Bedienungsanleitung

Asus

Asus M4A78-E SE Bedienungsanleitung

Asus

Asus ROG STRIX Z370-E GAMING Bedienungsanleitung

Asus

Asus P4SP-MX SE Bedienungsanleitung

Asus

Asus Hummingbird Bedienungsanleitung

Asus

Asus P4P800-E DELUXE Bedienungsanleitung

Asus

Asus MAXIMUS IV EXTREME-Z Bedienungsanleitung

Asus

Asus P5N73-AM Bedienungsanleitung

Asus

Asus F2A55-M LE Bedienungsanleitung

Asus

Asus AAEON UP Xtreme UP-WHL01 Bedienungsanleitung

Asus

Asus P6T6WS Revolution - Motherboard - ATX Bedienungsanleitung

Asus

Asus TUF Z390-PRO GAMING Bedienungsanleitung

Asus

Asus Z170-Premium series Bedienungsanleitung

Asus

Asus Prime H510M-A Bedienungsanleitung

Asus

Asus P3V4X Bedienungsanleitung

Asus

Asus Prime B460I-PLUS Bedienungsanleitung

Asus

Asus ROG STRIX B460-F GAMING Bedienungsanleitung

Asus

Asus SK8V Bedienungsanleitung

Asus

Asus P5KPL IPC/SI Bedienungsanleitung

Asus

Asus TUF B450M-PLUS GAMING Bedienungsanleitung

Asus

Asus A55M-E Bedienungsanleitung

Asus

Asus Z87-PLUS Bedienungsanleitung

Asus

Asus ROG STRIX Z490-F GAMING Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung

Medion

Medion MS-7091 Bedienungsanleitung