Asus M2N-E SLI Bedienungsanleitung

Motherboard

M2N-E SLI

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or

altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME

WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY

ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identication or

explanation and to the owners’ benet, without intent to infringe.

E2830

First Edition

October 2006

iii
Contents
Notices ................................................................................................vii
Safety information .............................................................................viii
About this guide.................................................................................. ix
Typography .......................................................................................... x
M2N-E SLI specications summary...................................................... xi
Chapter 1: Product introduction
1 Welcome! .............................................................................. 1-1
2 Package contents ................................................................. 1-1
3 Special features .................................................................... 1-2
3.1 Product highlights ................................................... 1-2
3.2 ASUS Special features............................................. 1-4
Chapter 2: Hardware information
1 Before you proceed .............................................................. 2-1
2 Motherboard overview .......................................................... 2-2
2.1 Placement direction ................................................ 2-2
2.2 Screw holes............................................................. 2-2
2.3 Motherboard layout ................................................ 2-3
2.4 Layout Contents ..................................................... 2-4
3 Central Processing Unit (CPU) .............................................. 2-5
3.1 Installing the CPU .................................................... 2-5
3.2 Installing the heatsink and fan ................................ 2-7
4 System memory.................................................................. 2-10
4.1 Overview ............................................................... 2-10
4.2  Memory congurations ......................................... 2-10
4.3 Installing a DIMM ................................................... 2-15
4.4 Removing a DIMM.................................................. 2-15
5 Expansion slots ................................................................... 2-16
5.1 Installing an expansion card .................................. 2-16
5.2  Conguring an expansion card .............................. 2-16
5.3 Interrupt assignments........................................... 2-17
5.4 PCI slots ................................................................ 2-17
5.5 PCI Express x1 slot ............................................... 2-18
5.6 PCI Express x16 slots............................................ 2-18

iv
Contents
6 Jumpers .............................................................................. 2-19
7 Connectors ......................................................................... 2-22
7.1 Rear panel connectors .......................................... 2-22
7.2 Internal connectors ............................................... 2-24
Chapter 3: Powering up
1  Starting up for the rst time ................................................ 3-1
2 Powering off the computer................................................... 3-2
2.1 Using the OS shut down function ........................... 3-2
2.2 Using the dual function power switch..................... 3-2
Chapter 4: BIOS setup
1 Managing and updating your BIOS ........................................ 4-1
1.1  Creating a bootable oppy disk .............................. 4-1
1.2 Updating the BIOS................................................... 4-2
1.3  Saving the current BIOS le .................................... 4-4
1.4 ASUS CrashFree BIOS 3 utility ................................ 4-5
1.5 ASUS EZ Flash 2 utility............................................ 4-7
1.6 ASUS Update utility ................................................ 4-8
2 BIOS setup program............................................................ 4-11
2.1 BIOS menu screen ................................................. 4-12
2.2 Menu bar ............................................................... 4-12
2.3 Legend bar............................................................ 4-13
2.4 Menu items ........................................................... 4-13
2.5 Sub-menu items.................................................... 4-13
2.6  Conguration elds ............................................... 4-13
2.7 Pop-up window...................................................... 4-14
2.8 General help .......................................................... 4-14
3 Main menu........................................................................... 4-15
3.1 System Time ........................................................ 4-15
3.2 System Date ........................................................ 4-15
3.3 Legacy Diskette A ............................................... 4-15
3.5 Primary and Secondary IDE Master/Slave ............. 4-16
3.6 SATA 1, 2, 3, 4..................................................... 4-18
3.7 HDD SMART Monitoring......................................... 4-19

v
Contents
3.8 Installed Memory................................................... 4-19
4 Advanced menu .................................................................. 4-20
4.1  JumperFree Conguration..................................... 4-20
4.3   CPU Conguration ................................................. 4-23
4.4 PCIPnP ................................................................... 4-25
4.5  Onboard Device Conguration .............................. 4-26
4.6  SLI Conguration................................................... 4-31
5 Power menu ........................................................................ 4-32
5.1 ACPI Suspend Type .............................................. 4-32
5.2 ACPI APIC Support ............................................... 4-32
5.3  APM Conguration ................................................ 4-33
5.4 Hardware Monitor.................................................. 4-35
6 Boot menu .......................................................................... 4-37
6.1 Boot Device Priority .............................................. 4-37
6.2 Removable Drives.................................................. 4-38
6.3 Hard Disk Drives.................................................... 4-38
6.4  Boot Settings Conguration  ................................ 4-39
6.5 Security................................................................. 4-41
7 Tools menu ......................................................................... 4-43
ASUS EZ Flash 2.................................................................. 4-43
8 Exit menu............................................................................ 4-44
Chapter 5: Software support
1 Installing an operating system.............................................. 5-1
2 Support CD information ........................................................ 5-1
2.1 Running the support CD.......................................... 5-1
2.2 Drivers menu........................................................... 5-2
2.3 Utilities menu .......................................................... 5-3
2.4 Manuals menu ......................................................... 5-4
2.5 ASUS Contact information ...................................... 5-5
2.6 Other information ................................................... 5-5
3 Software information............................................................ 5-8
3.1  Cool ‘n’ Quiet!™ Technology ................................... 5-8
3.2 ASUS PC Probe II ................................................... 5-10

vi
Contents
5.4  RAID congurations ............................................................ 5-16
5.4.1 Installing hard disks............................................... 5-17
5.4.2 NVIDIA® RAID congurations................................. 5-18
5.5 Creating a RAID driver disk ................................................. 5-25
Chapter 6: NVIDIA® SLI™ technology support 
6.1 Overview ............................................................................... 6-1
Requirements........................................................................ 6-1
6.2 Dual graphics card setup ...................................................... 6-2
6.2.1 Installing SLI-ready graphics cards.......................... 6-2
6.2.2 Installing the device drivers .................................... 6-5
6.2.3 Enabling the multi-GPU feature in Windows ............ 6-5

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes

or modications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viii

The symbol of the crossed out wheeled bin indicates that the product

(electrical and electronic equipment) should not be placed in municipal

waste. Check local regulations for disposal of electronic products.

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal cables

are connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully

read all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a

qualied service technician or your retailer.

About this guide

This user guide contains the information you need when installing and

conguring the motherboard.

How this guide is organized

This manual contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to

perform when installing system components. It includes description of

the switches, jumpers, and connectors on the motherboard.

• Chapter 3: Powering up

This chapter describes the power up sequence, the vocal POST

messages, and ways of shutting down the system.

• Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

• Chapter 5: Software support

This chapter describes the contents of the support CD that comes

with the motherboard package.

• Chapter 6: NVIDIA® SLI™ technology support

This chapter tells how to install SLI-ready PCI Express graphics cards.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Bold text Indicates a menu or an item to select

Italics

Used to emphasize a word or a phrase

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key

Example: <Enter> means that you must press the Enter or

Return key

<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+)

Example: <Ctrl>+<Alt>+<D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets

Example: At the DOS prompt, type the command line:

awdash M2N-E SLI.ROM

Where to nd more information

Refer to the following sources for additional information and for product

and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as

warranty yers, that may have been added by your dealer. These

documents are not part of the standard package.

Andere Handbücher für M2N-E SLI

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus B150M-A/M.2 Bedienungsanleitung

Asus

Asus AW171 Bedienungsanleitung

Asus

Asus Rampage IV Extreme Bedienungsanleitung

Asus

Asus PRIME Z590-P Bedienungsanleitung

Asus

Asus P7F7-E WS SUPERCOMPUTER Bedienungsanleitung

Asus

Asus H97-PLUS Bedienungsanleitung

Asus

Asus PRIME A320M-C R2.0 Bedienungsanleitung

Asus

Asus H110M-D D3 Bedienungsanleitung

Asus

Asus H110M-C D3 Bedienungsanleitung

Asus

Asus HP Alcatraz 850 ATX Bedienungsanleitung

Asus

Asus F1A75-I DELUXE Bedienungsanleitung

Asus

Asus P5N-T Deluxe Bedienungsanleitung

Asus

Asus PRIME Z370-A II Bedienungsanleitung

Asus

Asus DSBF-DM SAS Bedienungsanleitung

Asus

Asus CUC2 Bedienungsanleitung

Asus

Asus P5-99VM Bedienungsanleitung

Asus

Asus K8V-F Bedienungsanleitung

Asus

Asus M2N-X PLUS Bedienungsanleitung

Asus

Asus P8B-E/4L Technisches Handbuch

Asus

Asus P5GC-MX GBL Bedienungsanleitung

Asus

Asus F1A55-V PLUS Bedienungsanleitung

Asus

Asus PRIME B460-PLUS Bedienungsanleitung

Asus

Asus Z170 PRO GAMING Bedienungsanleitung

Asus

Asus H61M-A Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung