Asus P5LD2-C IPAT Bedienungsanleitung

Motherboard

P5LD2-C/IPAT

E3609

First Edition

January 2008

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or

altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME

WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY

ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identication or

explanation and to the owners’ benet, without intent to infringe.

iii

Contents

Notices......................................................................................................... vi

Safety information ..................................................................................... vii

About this guide ....................................................................................... viii

P5LD2-C/IPAT specications summary ..................................................... x

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Special features............................................................................ 1-2

Product highlights........................................................................... 1-2

Chapter 2: Hardware information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard overview................................................................. 2-2

2.2.1 Placement direction ........................................................ 2-2

2.2.2 Screw holes .................................................................... 2-2

2.2.3 Motherboard layout ......................................................... 2-3

2.2.4 Layout contents............................................................... 2-4

2.3 Central Processing Unit (CPU) ................................................... 2-5

2.3.1 Installing the CPU ........................................................... 2-5

2.3.2 Installing the CPU heatsink and fan................................ 2-8

2.3.3 Uninstalling the CPU heatsink and fan ......................... 2-10

2.4 System memory ......................................................................... 2-12

2.4.1 Overview ....................................................................... 2-12

2.4.2 Memory congurations.................................................. 2-12

2.4.3 Installing a DIMM .......................................................... 2-16

2.4.4 Removing a DIMM ........................................................ 2-16

2.5 Expansion slots.......................................................................... 2-17

2.5.1 Installing an expansion card ......................................... 2-17

2.5.2 Conguring an expansion card ..................................... 2-17

2.5.3 Interrupt assignments ................................................... 2-18

2.5.4 PCI slots........................................................................ 2-19

2.5.5 PCI Express x16 slot..................................................... 2-19

2.5.6 PCI Express x1 slot....................................................... 2-19

2.6 Jumpers ...................................................................................... 2-20

2.7 Connectors ................................................................................. 2-22

Contents

2.7.1 Rear panel connectors.................................................. 2-22

2.7.2 Internal connectors ....................................................... 2-23

Chapter 3: Powering up

3.1 Starting up for the rst time........................................................ 3-1

3.2 Powering off the computer.......................................................... 3-2

3.2.1 Using the OS shut down function.................................... 3-2

3.2.2 Using the dual function power switch.............................. 3-2

Chapter 4: BIOS setup

4.1 Managing and updating your BIOS ............................................ 4-1

4.1.1 Creating a bootable oppy disk....................................... 4-1

4.1.2 AFUDOS utility................................................................ 4-2

4.1.3 AFUWIN utility................................................................. 4-5

4.2 BIOS setup program .................................................................... 4-6

4.2.1 BIOS menu screen.......................................................... 4-7

4.2.2 Menu bar......................................................................... 4-7

4.2.3 Navigation keys............................................................... 4-7

4.2.4 Menu items ..................................................................... 4-8

4.2.5 Sub-menu items.............................................................. 4-8

4.2.6 Conguration elds ......................................................... 4-8

4.2.7 Pop-up window ............................................................... 4-8

4.2.8 Scroll bar......................................................................... 4-8

4.2.9 General help ................................................................... 4-8

4.3 Main menu .................................................................................... 4-9

4.3.1 BIOS Information ............................................................ 4-9

4.3.2 Memory Information ........................................................ 4-9

4.3.3 System Date .................................................................. 4-9

4.3.4 System Time .................................................................. 4-9

4.4 Advanced menu ......................................................................... 4-10

4.4.1 Pxe Boot Option............................................................ 4-10

4.4.2 ACPI Settings.................................................................4-11

4.4.3 CPU Conguration ........................................................ 4-12

4.4.4 IDE Conguration.......................................................... 4-13

4.4.5 On Board LAN............................................................... 4-14

4.4.6 Other Power On Device ................................................ 4-15

Contents

4.4.7 Super IO Conguration ................................................. 4-16

4.4.8 PCI Subsystem Settings ............................................... 4-18

4.5 Chipset menu ............................................................................. 4-20

4.5.1 North Bridge.................................................................. 4-20

4.5.2 South Bridge ................................................................. 4-21

4.5.3 Legacy USB Conguration............................................ 4-22

4.6 Boot menu .................................................................................. 4-23

2.6.1 Quiet Boot .................................................................... 4-23

2.6.2 Setup Prompt Timeout ................................................. 4-23

4.7 Security menu ............................................................................ 4-24

2.7.1 Setup Administrator Password...................................... 4-24

2.7.2 User Password.............................................................. 4-25

4.8 Exit menu .................................................................................... 4-26

Chapter 5: Software support

5.1 Installing an operating system ................................................... 5-1

5.2 Support CD information .............................................................. 5-1

5.2.1 Running the support CD ................................................. 5-1

5.2.2 Drivers menu................................................................... 5-2

5.2.3 ASUS Contact information .............................................. 5-3

5.2.4 Other information ............................................................ 5-3

Appendix: CPU features

A.1 Enhanced Intel SpeedStep®Technology (EIST) ........................A-1

A.1.1 System requirements ......................................................A-1

A.1.2 Using the EIST................................................................A-1

A.2 Intel®Hyper-Threading Technology ...........................................A-2

Using the Hyper-Threading Technology ........................................A-2

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

vii

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing system

before you add a device.

•

Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

•

Seek professional assistance before using an adpater or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your area.

If you are not sure about the voltage of the electrical outlet you are using,

contact your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

The symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, Mercury-containing button cell battery) should not be

placed in municipal waste. Check local regulations for disposal of electronic

products.

viii

About this guide

This user guide contains the information you need when installing and conguring

the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

• Chapter 3: Powering up

This chapter describes the power up sequence, the vocal POST messages,

and ways of shutting down the system.

• Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

• Chapter 5: Software support

This chapter describes the contents of the support CD that comes with the

motherboard package.

• Appendix: CPU features

The Appendix describes the CPU features that the motherboard supports.

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the

Enter or Return key.

<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+).

Example: <Ctrl>+<Alt>+<D>

Command Means that you must type the command exactly

as shown, then supply the required item or value

enclosed in brackets.

Example: At the DOS prompt, type the command line:

afudos /i[lename]

afudos /iP5LD2CIPAT.ROM

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

P5LD2-C/IPAT specications summary

(continued on the next page)

CPU LGA775 socket for Intel®CoreTM 2 Duo / CoreTM 2 Extreme /

Pentium®D / Pentium®4 / Celeron®processors

Supports next generation 45nm multi-core CPU

Intel®Hyper-Threading Technology ready

Supports Enhanced Intel SpeedStep®Technology (EIST)

Chipset Northbridge: Intel®MCH 945GC

Southbridge: Intel®ICH7

Front Side Bus 1066 / 800 / 533 MHz

Memory 2 x 240-pin DIMM sockets support unbuffered non-ECC

DDR2 533 / 667 memory modules

Supports up to 4 GB system memory

Expansion slots 1 x PCIe x16 slot for discrete graphic card

1 x PCIe x1 slot

5 x PCI slots

Storage Intel®ICH7 South Bridge supports:

- 1 x Ultra DMA 100 / 66 / 33

- 4 x Serial ATA 3Gb/s devices

Audio ALC662 6-channel High Denition Audio CODEC

Supports Jack-detect, Anti Pop Funtion, Multi-Streaming

Compatible with Vista Premium OS

LAN RTL 8111C PCIe Gb LAN

Rear panel 1 x Parallel port

2 x COM ports

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x RJ45

4 x USB 2.0/1.1 prots

6-channel Audio I/O ports

Internal connectors Azalia High Denition Analog Front Panel Audio connector

1 x Chassis Intrusion

1 x 4-pin internal speaker connector

1 x 24-pin EPS12V power connector

1 x 4-pin ATX 12V power connector

2 x USB connectors for 4 additional USB 2.0 ports

1 x CD audio-in connector

1 x CPU fan connector

1 x Chassis fan connector

BIOS features 8 Mb Flash ROM, AMI BIOS, PnP, DMI v2.0, WfM2.0,

SMBIOS v2.4, ACPI v3.0

USB Supports up to 8 USB 2.0 ports (4 ports at mid-board, 4 ports

at rear panel)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus P4SP-MX SE Bedienungsanleitung

Asus

Asus TUF GAMING A520M-PLUS Bedienungsanleitung

Asus

Asus M4N75TD Bedienungsanleitung

Asus

Asus H170I-PRO Bedienungsanleitung

Asus

Asus PRIME B350M-A Bedienungsanleitung

Asus

Asus Z97-DELUXE Series Bedienungsanleitung

Asus

Asus PRIME H610M2 FPT Bedienungsanleitung

Asus

Asus SK8N Bedienungsanleitung

Asus

Asus Z97-Deluxe/USB 3.1 Bedienungsanleitung

Asus

Asus Pro WS X299 SAGE II Bedienungsanleitung

Asus

Asus Z87-A Bedienungsanleitung

Asus

Asus EX-B250-V7 Bedienungsanleitung

Asus

Asus ROG STRIX Z490-G GAMING WI-FI Bedienungsanleitung

Asus

Asus P4SE U2 Bedienungsanleitung

Asus

Asus H110M-A/DP Bedienungsanleitung

Asus

Asus PRIME H610I-PLUS D4 Bedienungsanleitung

Asus

Asus PRIME H310I-PLUS R2.0 Bedienungsanleitung

Asus

Asus P5GL-MX Gebrauchsanweisung

Asus

Asus P4B-LX Bedienungsanleitung

Asus

Asus Prime H270-PRO Bedienungsanleitung

Asus

Asus H170M-E D3 Bedienungsanleitung

Asus

Asus P8Z77-I DELUXE Bedienungsanleitung

Asus

Asus H61M-CS Bedienungsanleitung

Asus

Asus A8N-VM CSM NBP Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung

Medion

Medion MS-7091 Bedienungsanleitung