Asus P5SD2-X SE Bedienungsanleitung
Motherboard
P5SD2-X SE
ii
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the ownersʼ benefit, without intent to infringe.
E2394
First Edition
February 2006
iii
Contents
Notices ................................................................................................ vi
Safety information ............................................................................. vii
About this guide .................................................................................viii
Typography ......................................................................................... ix
P5SD2-X SE specifications summary .................................................... x
Chapter 1: Product introduction
1.1 Welcome! .............................................................................. 1-2
1.2 Package contents ................................................................. 1-2
1.3 Special features .................................................................... 1-2
1.3.1 Product highlights ................................................... 1-2
1.3.2 Innovative ASUS features ....................................... 1-4
1.4 Before you proceed .............................................................. 1-5
1.5 Motherboard overview .......................................................... 1-6
1.5.1 Placement direction ................................................ 1-6
1.5.2 Screw holes ............................................................. 1-6
1.5.3 Motherboard layout ................................................ 1-7
1.6 Central Processing Unit (CPU) .............................................. 1-8
1.6.1 Installling the CPU ................................................... 1-8
1.6.2 Installling the CPU heatsink and fan ...................... 1-11
1.6.3 Uninstalling the CPU heatsink and fan ................... 1-13
1.7 System memory .................................................................. 1-15
1.7.1 Overview ............................................................... 1-15
1.7.2 Memory Configurations ......................................... 1-15
1.7.3 Installing a DIMM ................................................... 1-18
1.7.4 Removing a DIMM .................................................. 1-18
1.8 Expansion slots ................................................................... 1-19
1.8.1 Installing an expansion card .................................. 1-19
1.8.2 Configuring an expansion card .............................. 1-19
1.8.3 Interrupt assignments ........................................... 1-20
1.8.4 PCI slots ................................................................ 1-21
1.8.5 PCI Express x16 slot ............................................. 1-21
1.8.6 PCI Express x1 slot ............................................... 1-21
1.9 Jumpers .............................................................................. 1-22
iv
Contents
1.10 Connectors ......................................................................... 1-24
1.10.1 Rear panel connectors .......................................... 1-24
1.10.2 Internal connectors ............................................... 1-25
Chapter 2: BIOS setup
2.1 Managing and updating your BIOS ........................................ 2-2
2.1.1 Creating a bootable floppy disk .............................. 2-2
2.1.2 ASUS EZ Flash utility ............................................... 2-3
2.1.3 AFUDOS utility ........................................................ 2-4
2.1.4 ASUS CrashFree BIOS 2 utility ................................ 2-6
2.1.5 ASUS Update utility ................................................ 2-8
2.2 BIOS setup program ............................................................ 2-11
2.2.3 Navigation keys ..................................................... 2-12
2.2.1 BIOS menu screen ................................................. 2-12
2.2.2 Menu bar ............................................................... 2-12
2.2.4 Menu items ........................................................... 2-13
2.2.5 Sub-menu items .................................................... 2-13
2.2.6 Configuration fields ............................................... 2-13
2.2.7 Pop-up window ...................................................... 2-13
2.2.8 Scroll bar ............................................................... 2-13
2.2.9 General help .......................................................... 2-13
2.3 Main menu ........................................................................... 2-14
2.3.1 System Time ........................................................ 2-14
2.3.2 System Date ......................................................... 2-14
2.3.3 Legacy Diskette A ................................................ 2-14
2.3.4 Primary, Third and Fourth IDE Master/Slave ......... 2-15
2.3.5 IDE Configuration .................................................. 2-16
2.3.6 OnBoard PCI S-ATA Controller ............................. 2-17
2.3.7 System Information .............................................. 2-17
2.4 Advanced menu .................................................................. 2-18
2.4.1 JumperFree Configuration ..................................... 2-18
2.4.2 CPU Configuration ................................................. 2-20
2.4.3 Chipset .................................................................. 2-21
2.4.4 Onboard Devices Configuration ............................. 2-22
2.4.5 PCI PnP .................................................................. 2-24
v
Contents
2.4.6 USB Configuration ................................................. 2-25
2.5 Power menu ........................................................................ 2-26
2.5.1 Suspend Mode ...................................................... 2-26
2.5.2 Repost Video on S3 Resume ................................. 2-26
2.5.3 ACPI 2.0 Support .................................................. 2-26
2.5.4 ACPI APIC Support ............................................... 2-26
2.5.5 APM Configuration ................................................ 2-27
2.5.6 Hardware Monitor .................................................. 2-29
2.6 Boot menu .......................................................................... 2-31
2.6.1 Boot Device Priority .............................................. 2-31
2.6.2 Boot Settings Configuration ................................. 2-31
2.6.3 Security ................................................................. 2-33
2.7 Exit menu ............................................................................ 2-35
Chapter 3: Software support
3.1 Installing an operating system .............................................. 3-2
3.2 Support CD information ........................................................ 3-2
3.2.1 Running the support CD .......................................... 3-2
3.2.2 Drivers menu ........................................................... 3-3
3.2.3 Utilities menu .......................................................... 3-4
3.2.4 Make Disk menu ...................................................... 3-5
3.2.5 Manual menu ........................................................... 3-6
3.2.6 ASUS Contact information ...................................... 3-6
A: Appendix
A.1 Intel® EM64T ........................................................................ A-2
A.2 Enhanced Intel SpeedStep® Technology (EIST) ................... A-2
A.3 Intel® Hyper-Threading Technology ..................................... A-4
vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturerʼs instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
ICES-003.
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes
or modifications to this unit not expressly approved by the party
responsible for compliance could void the userʼs authority to operate
this equipment.
vii
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal
cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
•
Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
•
Seek professional assistance before using an adapter or extension
cord. These devices could interrupt the grounding circuit.
•
Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you
are using, contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact
a qualified service technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully
read all the manuals that came with the package.
•
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a
qualified service technician or your retailer.
viii
About this guide
This user guide contains the information you need when installing and
configuring the motherboard.
How this guide is organized
This manual contains the following parts:
• Chapter 1: Product introduction
This chapter describes the features of the motherboard and the
new technology it supports. This chapter also lists the hardware
setup procedures that you have to perform when installing system
components. It includes description of the jumpers and connectors on
the motherboard.
• Chapter 2: BIOS setup
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.
• Chapter 3: Software support
This chapter describes the contents of the support CD that comes
with the motherboard package.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware
and software products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as
warranty flyers, that may have been added by your dealer. These
documents are not part of the standard package.
ix
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
Typography
DANGER/WARNING: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
NOTE: Tips and additional information to help you complete a
task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
Bold text Indicates a menu or an item to select
Italics
Used to emphasize a word or a phrase
<Key> Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key
Example: <Enter> means that you must press the Enter or
Return key
<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the
key names are linked with a plus sign (+)
Example: <Ctrl>+<Alt>+<Del>
Command Means that you must type the command exactly as shown,
then supply the required item or value enclosed in
brackets
Example: At the DOS prompt, type the command line:
afudos /i[filename]
afudos /iP5SD2XSE.ROM
x
P5SD2-X SE specifications summary
(continued on the next page)
CPU
Chipset
Front Side Bus
Memory
Expansion slots
Storage
Audio
LAN
USB
Special features
BIOS Features
LGA775 socket for Intel® Pentium® D/Intel® Pentium® 4
or Intel® Celeron® processors
Compatible with Intel® PCG 05B/05A and 04B/04A
processors
Supports Intel® Enhanced Memory 64 Technology(EM64T)
Supports Enhanced Intel SpeedStep® Technology(EIST)
Supports Hyper-ThreadingTechnology
Supports Dual Core Technology
Northbridge: SIS 656
Southbridge: SIS 965L
800/533 MHz
Dual-channel memory architecture
4 x 240-pin DIMM sockets support unbufferred non-ECC
667/533 MHz DDR2 memory modules
1 x PCI Express x16 slot for discrete graphics card
2 x PCI Express x1 slots
3 x PCI slots
SIS 965L Southbridge supports:
- 2 x Serial ATA with RAID 0, RAID 1 and JBOD
- 2 x Ultra DMA 133/100
ADI AD1986A 6-channel audio CODEC
Supports Jack-sensing and enumeration technology
S/PDIF out interface support (Coaxial)
Realtek RTL 8201CL Phy
Supports up to eight USB 2.0 ports
AI Overclocking
CPU LockFree
ASUS Q-Fan
ASUS CrashFree BIOS 2
ASUS MyLogo™
ASUS EZ Flash
ASUS C.P.R. (CPU Parameter Recall)
4 MB Flash ROM, AMI BIOS, PnP, DMI2.0, SM BIOS 2.3,
WfM2.0, SM BIOS 2.3 ASUS EZ Flash, ASUS Crashfree BIOS2,
CPU Multiplier
Andere Handbücher für P5SD2-X SE
3
Inhaltsverzeichnis
Andere Asus Hauptplatine Handbücher
Asus
Asus M2N-XE Bedienungsanleitung
Asus
Asus H81M-D R2.0 Bedienungsanleitung
Asus
Asus P5AD2-E PREMIUM Bedienungsanleitung
Asus
Asus P5BV-C 2L Bedienungsanleitung
Asus
Asus A7V400-MX SE Bedienungsanleitung
Asus
Asus M4A87TD Bedienungsanleitung
Asus
Asus M2N32-SLI PREMIUM VISTA Bedienungsanleitung
Asus
Asus K8V-F Bedienungsanleitung
Asus
Asus ROG MAXIMUS XII HERO WI-FI Bedienungsanleitung
Asus
Asus Z9PA-U8 Bedienungsanleitung
Asus
Asus P5KPL SE Bedienungsanleitung
Asus
Asus SABERTOOTH P67 Bedienungsanleitung
Asus
Asus E3746 Gebrauchsanweisung
Asus
Asus M2A-VM HDMI Bedienungsanleitung
Asus
Asus STRIX Z270F Bedienungsanleitung
Asus
Asus P5WDG2 WS Professional Bedienungsanleitung
Asus
Asus WS C422 DC Bedienungsanleitung
Asus
Asus Motherboard P5NT WS Bedienungsanleitung
Asus
Asus A8N-E Bedienungsanleitung
Asus
Asus K8V-VM Ultra Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
Intel
Intel D33217CK Bedienungsanleitung
