Asus Z8NH-D12 Bedienungsanleitung

Motherboard

Z8NH-D12 Series

Z8NH-D12

Z8PH-D12/IFB

Z8PH-D12 SE/QDR

E5743

First Edition V1

March 2010

No part of this manual, including the products and software described in it, may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means,

except documentation kept by the purchaser for backup purposes, without the express written permission

of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

iii

Contents

Notices........................................................................................................ vii

Safety information .................................................................................... viii

About this guide ......................................................................................... ix

Typography .................................................................................................. x

Z8NH-D12 Series specications summary............................................... xi

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-3

1.2 Package contents......................................................................... 1-3

1.3 Serial number label...................................................................... 1-4

1.4 Special features............................................................................ 1-4

1.4.1 Product highlights ........................................................... 1-4

1.4.2 Innovative ASUS features ............................................... 1-6

Chapter 2: Hardware information

2.1 Before you proceed ..................................................................... 2-3

2.2 Motherboard overview................................................................. 2-5

2.2.1 Placement direction ........................................................ 2-5

2.2.2 Screw holes .................................................................... 2-5

2.2.4 Motherboard layouts ....................................................... 2-6

2.2.5 Layout contents............................................................... 2-9

2.3 Central Processing Unit (CPU) ................................................. 2-11

2.3.1 Installing the CPU ..........................................................2-11

2.3.2 Installing the CPU heatsink and fan.............................. 2-14

2.4 System memory ......................................................................... 2-16

2.4.1 Overview ....................................................................... 2-16

2.4.2 Memory Configurations................................................. 2-17

2.4.3 Installing a DIMM .......................................................... 2-18

2.4.4 Removing a DIMM ........................................................ 2-18

2.5 Expansion slots.......................................................................... 2-19

2.5.1 Installing an expansion card ......................................... 2-19

2.5.2 Configuring an expansion card ..................................... 2-19

2.5.3 Interrupt assignments ................................................... 2-20

2.5.4 PCI Express x16 slot (x16 link) ..................................... 2-21

2.5.5 Installing ASMB4 management board........................... 2-21

Contents

2.6 Jumpers ...................................................................................... 2-22

2.7 Connectors ................................................................................. 2-28

2.7.1 Rear panel connectors.................................................. 2-28

2.7.2 Internal connectors ....................................................... 2-30

Chapter 3: Powering up

3.1 Starting up for the rst time........................................................ 3-3

3.2 Powering off the computer.......................................................... 3-4

3.2.1 Using the OS shut down function.................................... 3-4

3.2.2 Using the dual function power switch.............................. 3-4

Chapter 4: BIOS setup

4.1 Managing and updating your BIOS ............................................ 4-3

4.1.1 AFUDOS utility................................................................ 4-3

4.1.2 ASUS CrashFree BIOS 3 utility ...................................... 4-6

4.2 BIOS setup program .................................................................... 4-7

4.2.1 BIOS menu screen.......................................................... 4-8

4.2.2 Menu bar......................................................................... 4-8

4.2.3 Navigation keys............................................................... 4-8

4.2.4 Menu items ..................................................................... 4-9

4.2.5 Sub-menu items.............................................................. 4-9

4.2.6 Configuration fields ......................................................... 4-9

4.2.7 Pop-up window ............................................................... 4-9

4.2.8 Scroll bar......................................................................... 4-9

4.2.9 General help ................................................................... 4-9

4.3 Main menu .................................................................................. 4-10

4.3.1 System Time [xx:xx:xx] ................................................. 4-10

4.3.2 System Date [Day xx/xx/xxxx]....................................... 4-10

4.3.3 SATA1—4...................................................................... 4-10

4.3.4 IDE Configuration.......................................................... 4-12

4.3.5 AHCI Configuration ....................................................... 4-13

4.3.6 System Information ....................................................... 4-14

4.4 Advanced menu ......................................................................... 4-16

4.4.1 CPU Configuration ........................................................ 4-16

4.4.2 Chipset Configuration ................................................... 4-20

Contents

4.4.3 Legacy Device Configuration ........................................ 4-24

4.4.4 USB Configuration ........................................................ 4-25

4.4.5 PCIPnP Configuration................................................... 4-26

4.4.6 Power On Configuration................................................ 4-27

4.4.7 Event Log Configuration ............................................... 4-28

4.4.8 Hardware Monitor ......................................................... 4-28

4.4.9 I/O Virtualization............................................................ 4-30

4.4.10 PCI Express Configuration............................................ 4-30

4.4.11 ACPI Configuration ....................................................... 4-31

4.5 Server menu ............................................................................... 4-33

4.5.1 Remote Access Configuration....................................... 4-33

4.6 Boot menu .................................................................................. 4-35

4.6.1 Boot Device Priority ...................................................... 4-35

4.6.2 Hard Disk Drives; CDROM Drives ................................ 4-35

4.6.3 Boot Settings Configuration .......................................... 4-36

4.6.4 Security ......................................................................... 4-37

4.7 Exit menu.................................................................................... 4-39

Exit & Save Changes .................................................................. 4-39

Exit & Discard Changes ............................................................... 4-39

Discard Changes.......................................................................... 4-39

Load Setup Defaults .................................................................... 4-39

Chapter 5: RAID conguration

5.1 Setting up RAID............................................................................ 5-3

5.1.1 RAID definitions .............................................................. 5-3

5.1.2 Installing hard disk drives................................................ 5-4

5.1.3 Setting the RAID item in BIOS ........................................ 5-4

5.1.4 RAID configuration utilities.............................................. 5-4

5.2 LSI Software RAID Conguration Utility .................................... 5-5

5.2.1 Creating a RAID set ........................................................ 5-6

5.2.2 Adding or viewing a RAID configuration ....................... 5-12

5.2.3 Initializing the virtual drives ........................................... 5-13

5.2.4 Rebuilding failed drives................................................. 5-17

5.2.5 Checking the drives for data consistency ..................... 5-19

5.2.6 Deleting a RAID configuration....................................... 5-22

Contents

5.2.7 Selecting the boot drive from a RAID set...................... 5-23

5.2.8 Enabling WriteCache .................................................... 5-24

5.3 Intel®Matrix Storage Manager Option ROM Utility ................. 5-25

5.3.1 Creating a RAID set ...................................................... 5-26

5.3.2 Creating a Recovery set ............................................... 5-27

5.3.3 Deleting a RAID set ...................................................... 5-29

5.3.4 Resetting disks to Non-RAID ........................................ 5-30

5.3.5 Recovery Volume Options ............................................ 5-31

5.3.6 Exiting the Intel®Matrix Storage Manager .................... 5-32

5.3.7 Rebuilding the RAID ..................................................... 5-32

5.3.8 Setting the Boot array in the BIOS Setup Utility............ 5-34

Driver installation

6.1 RAID driver installation ............................................................... 6-3

6.1.1 Creating a RAID driver disk ............................................ 6-3

6.1.2 Windows®OS.................................................................. 6-6

6.1.3 Red Hat®Enterprise Linux OS ........................................ 6-9

6.1.4 SUSE Linux Enterprise Server OS ............................... 6-17

6.2 Intel chipset device software installation ................................ 6-19

6.3 LAN driver installation............................................................... 6-23

6.4 Display driver installation ......................................................... 6-27

6.5 Mellanox ConnectX DDR and ConnectX2 QDR PCI Gen2

Channel Adapter driver installation.......................................... 6-30

6.5.1 Windows operating system ........................................... 6-30

6.5.2 Red Hat®Enterprise Linux OS .............................6-34

6.6 Management applications and utilities installation ................ 6-37

6.6.1 Running the support DVD ............................................. 6-37

6.6.2 Drivers menu................................................................. 6-37

6.6.3 Utilities menu ................................................................ 6-38

6.6.4 Make disk menu............................................................ 6-38

6.6.5 Contact information....................................................... 6-38

Reference information

A.1 Z8NH-D12 block diagram.............................................................A-3

A.2 Z8PH-D12/IFB block diagram......................................................A-4

A.3 Z8PH-D12 SE/QDR block diagram..............................................A-5

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’

s instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modifications

to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

REACH

Complying with the REACH (Registration, Evaluation, Authorization, and Restriction

of Chemicals) regulatory framework, we published the chemical substances in our

products at ASUS REACH website at http://green.asus.com/english/REACH.htm.

viii

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing system

before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

• Make sure that your power supply is set to the correct voltage in your area.

If you are not sure about the voltage of the electrical outlet you are using,

contact your local power company.

• If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Check local regulations for disposal of electronic

products.

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This user guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technologies it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

• Chapter 3: Powering up

This chapter describes the power up sequence and ways of shutting down

the system.

• Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

• Chapter 5: RAID conguration

This chapter provides instructions for setting up, creating, and configuring

RAID sets using the available utilities.

• Chapter 6: Driver installation

This chapter provides instructions for installing the necessary drivers for

different system components.

• Appendix: Reference information

This appendix includes additional information that you may refer to when

configuring the motherboard.

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

flyers, that may have been added by your dealer. These documents are not

part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-

than sign means that you must press the

enclosed key.

Example: <Enter> means that you must press

the Enter or Return key.

<Key1+Key2+Key3> If you must press two or more keys

simultaneously, the key names are linked with

a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command

exactly as shown, then supply the required

item or value enclosed in brackets.

Example: At the DOS prompt, type the

command line: format A:/S

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Andere Handbücher für Z8NH-D12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus VISTA EDITION M2N-PLUS SLI Bedienungsanleitung

Asus

Asus A8N-SLI SE Bedienungsanleitung

Asus

Asus A58M-E Bedienungsanleitung

Asus

Asus PRIME B250M-J Bedienungsanleitung

Asus

Asus TUF B365-PLUS GAMING Bedienungsanleitung

Asus

Asus b85m-h plus Bedienungsanleitung

Asus

Asus P4B-LX Bedienungsanleitung

Asus

Asus P2B-N Bedienungsanleitung

Asus

Asus PRIME X370-A Bedienungsanleitung

Asus

Asus M4a785t-M - 785G Am3 Max-16Gb Ddr3 Uatx Pcie16 1Pcie... Bedienungsanleitung

Asus

Asus PRIME Z370M-PLUS II Bedienungsanleitung

Asus

Asus P8P67 DELUXE Bedienungsanleitung

Asus

Asus P11C-C/4L Bedienungsanleitung

Asus

Asus XG-DLS Bedienungsanleitung

Asus

Asus F1A55-M LE R2.0 Bedienungsanleitung

Asus

Asus PRIME B760M-A WIFI D4 Bedienungsanleitung

Asus

Asus P4B533-VM Bedienungsanleitung

Asus

Asus Sabertooth X99 Bedienungsanleitung

Asus

Asus Maximus VIII Hero Bedienungsanleitung

Asus

Asus Z170I PRO GAMING Bedienungsanleitung

Asus

Asus M2N 1394 Bedienungsanleitung

Asus

Asus P8H61-MX USB3 Bedienungsanleitung

Asus

Asus CUW-RM Bedienungsanleitung

Asus

Asus X99-A II Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung

Medion

Medion MS-7091 Bedienungsanleitung