Asus Power Case CB81 Bedienungsanleitung
User Guide
ASUS Power Case CB81
Q10378
First Edition / June 2015
2
Contents
English............................................................................................3
繁體中文 .......................................................................................8
簡體中文 .....................................................................................13
Françis...........................................................................................20
Deutch..........................................................................................26
Italiano .........................................................................................32
Pyccкий........................................................................................37
Português....................................................................................42
Español.........................................................................................48
Türkçe ...........................................................................................54
ไทย ................................................................................................60
Bahasa Indonesia......................................................................66
Bahasa Malayu...........................................................................72
Tiếng Việt.....................................................................................78
日本語..........................................................................................84
..............................................................................................89
............................................................................................95
3
Getting to know your Power Case
Power Case connector
Camera hole
Power Case battery
LED status indicator
Charging dongle
Cell type Lithium-ion rechargeable cell
Cell capacity 3.7 V / 4330 mAh (Typ.), 4170 mAh (min.)
Rated capacity 2600 mAh
Operating temperature 0 °C - 35 °C
Input DC 5.2 V, 1.2 A (Max)
Output DC 5.0 V, 0.9 A (Max)
4
Installing your Power Case
1. Remove the back cover of your Tablet.
2. (A) Insert the clips on your Power Case into the
grooves on your Tablet. (B) Press down the Power
Case on all sides to secure it in place.
NOTE: Ensure to turn o the device before installing your Power Case.
5
Charging Power Case with the dongle
1. (A) Position the dongle onto the connectors on the
Power Case. (B) Connect the micro USB cable into the
dongle.
NOTE:
•
Ensure to position the dongle rmly onto the connectors before
connecting the micro USB cable.
• Ensure that you plug the power adapter to the correct power outlet
with the correct input rating. The output voltage of this adapter is DC
5.2 V, 1.35 A.
• Keep the dongle away from cards with magnetic strips. The magnet
on the dongle might demagnetize the magnetic strip.
The LED status indicator on the dongle helps identify the current charging status
of your Power Case. Refer to the following table for details:
LED status indicator color Status
Orange Power Case charging
Green* Power Case charging complete
Blinking Orange/Green Charging error (Check connection)
* When an AC adapter cable is connected to the dongle, the LED status indicator
will be green even when the dongle is not connected to the Power Case.
6
2. Connect the micro USB cable to your power adapter,
then connect the power adapter to a nearby power
outlet.
Charging Power Case with your Tablet
You can charge your Power Case when it is installed on your
Tablet, the power allocation will be automatically managed.
NOTE: Ensure that you plug the power adapter to the correct power
outlet with the correct input rating. The output voltage of this adapter is
DC 5.2 V, 1.35 A.
7
Safety Notices
• Do not remove the non-detachable Li-on battery as this will void the
warranty.
• Avoid charging in extremely high or low temperature.The battery performs
optimally in an ambient temperature of 0 °C to +35 °C.
• Do not remove and replace the battery with a non-approved battery.
• Do not remove and soak the battery in water or any other liquid.
• Never try to open the battery as it contains substances that might be harmful
if swallowed or allowed to come into contact with unprotected skin.
• Do not remove and short-circuit the battery, as it may overheat and cause a
re. Keep it away from jewelry or metal objects.
• Do not remove and dispose of the battery in re. It could explode and
release harmful substances into the environment.
• Do not remove and dispose of the battery with your regular household
waste. Take it to a hazardous material collection point.
• Do not touch the battery terminals.
NOTES:
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used battery according to the instructions.
• Ensure to fully charge the battery before using your Power Case for extended
periods. Remember that the power adapter charges the battery as long as it
is plugged into a power source. Be aware that your Power Case takes much
longer to charge the battery when your Tablet is in use.
IMPORTANT! Do not leave your Power Case connected to the power source once it is
fully charged. Your Power Case is not designed to be connected to the power source
for extended periods of time.
8
電池型式 充電鋰電池
電池容量 3.7 V / 4330 mAh (Typ.), 4170 mAh (min.)
額定電容量 2600 mAh
充電溫度 0 ℃ - 35 ℃
電流輸入 DC 5.2 V, 1.2 A
電流輸出 DC 5.0 V, 0.9 A
外觀介紹
行動電源背蓋連接埠
相機孔
行動電源背蓋電池
LED 充電狀態指示燈
電源轉接器
9
安裝行動電源背蓋
1. 取下平板電腦的背蓋。
2. (A) 將行動電源背蓋的卡榫插入平板電腦的凹槽，(B) 按
壓行動電源背蓋的邊角將其固定到位。
說明：在安裝行動電源背蓋前，請先關閉平板電腦的電源。
10
使用轉接器為行動電源背蓋充電
1. (A) 將轉接器置於行動電源背蓋連接埠上方，(B) 將 micro
USB 傳輸線與轉接器連接。
LED 充電指示燈顏色 狀態
橘燈恆亮 行動電源背蓋充電中
綠燈恆亮 * 行動電源背蓋充電完成
橘綠燈交互閃爍 充電錯誤 ( 接觸不良 )
* 當您的轉接器未連接行動電源背蓋，但已連接電源時，LED 充電狀態指示燈
顯示為綠燈。
LED 充電狀態指示燈會顯示行動電源背蓋的充電狀態，其說
明如下：
說明：
• 在連接 micro USB 傳輸線前，請確認轉接器穩固地置於連接埠上
方。
• 為了您的安全起見，充電前請先確認符合電源變壓器的輸入 / 輸
出頻率資訊。本產品適用的電源輸出電壓為 DC 5.2V, 1.35A。
• 請您將對磁性敏感的物品遠離轉接器，以避免因消磁而失去功能。
Inhaltsverzeichnis
