ASV PT60 Bedienungsanleitung

8/17/2016

Operation and Maintenance

Manual

PT60

SN All

English

All

Language:

Geographic Region:

Serial Number Range:

This manual is complements of

TrackLoaderParts.com

The world's best source for ASV parts.

Track Loader Parts 6543 Chupp Road Atlanta, Georgia 30058 USA (800)616-8156

California Proposition 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Machine Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Machine Labels and Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Fire and Overheat Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Operating Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Machine Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Switches/Instrumentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Machine Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Machine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Recommended Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Service Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Read and understand this manual prior to operating, inspecting, or attempting to maintain the Rubber Track Loader.

Performing any of these tasks incorrectly can lead to machine damage, personal injury or even death.

WARNING

CONTENTS

California (U.S.A.) state law stipulates that manufacturers of machines operated within its borders must provide a clear warning

to customers regarding exposure to substances commonly associated with the machine that are recognized by the state as

harmful. Terex/ASV complies with this requirement by providing the following information.

CALIFORNIA PROPOSITION 65

CALIFORNIA

Proposition 65

Warning: This product contains lead and

lead compounds, diesel engine exhaust,

and used engine oil, chemicals known to

the state of California to cause cancer.

CALIFORNIA

Proposition 65

Warning: This product contains lead, a

chemical known to the state of California

to cause birth defects or other reproduc-

tive harm.

Thank you for purchasing an ASV

Rubber Track Loader. With this

machine, you will be able to perform

tasks faster and more efficiently than

with any other machine its size.

The PT-50/60 are rugged and agile

machines capable of working on a vari-

ety of challenging terrains. They are

designed to be very safe, but safe oper-

ation also requires caution and attentive-

ness on the part of the operator.

There are many hazards that can be

encountered during operation of an off

highway utility vehicle such as the PT-

50/60. With this in mind, it is the respon-

sibility of each operator to read and fully

understand this manual before attempt-

ing to operate the machine. Machine

damage, bodily injury, or even death

may result if the procedures and precau-

tions described in this manual are not

followed closely.

At the time of publication, all information,

photographs, and illustrations are techni-

cally correct.

Machine Orientation

Terms like front, rear, left, and right are

used throughout this manual to describe

portions of the machine. They are to be

understood from the perspective of an

operator seated inside the cab.

IINNTTRROODDUUCCTTIIOONN

This manual contains the words

Warning, Caution and Note to empha-

size important information. The word

WARNING identifies personal safety

related information. The word CAUTION

identifies unsafe practices that may

result in machine damage. The word

Note: identifies supplementary informa-

tion which requires special attention.

WARNING

GGeenneerraallDDiimmeennssiioonnssPPTT--5500((PPTT--6600))

Height to top of ROPS: 77 in. / 1956 mm (77 in. / 1956 mm)

Ground clearance: 12 in. / 305 mm (12 in. / 305 mm)

Max. lift height, at hinge pin: 115 in. / 2921 mm (115 in. / 2921 mm)

Length of undercarriage: 75 in. / 1905 mm (75 in. / 1905 mm)

Machine length, w/out bucket: 100 in. / 2540 mm (100 in. / 2540 mm)

Machine length, with bucket: 128 in. / 3251 mm (128 in. / 3251 mm)

Machine width: 60 in. / 1524 mm (60 in. / 1524 mm)

TTrraacckkSSppeecciiffiiccaattiioonnss

Track width: 15 in. / 381 mm (15 in. / 381 mm)

Length of track on ground: 59 in. / 1499 mm (59 in. / 1499 mm)

MMaacchhiinneeWWeeiigghhtt

Without bucket (shipping): 5,500 lb / 2495 kg (5,500 lb / 2495 kg)

With bucket (operating): 6,200 lb / 2812 kg (6,200 lb / 2812 kg)

Ground pressure: 3.1 psi / 21.4 kPa (3.1 psi / 21.4 kPa)

Ground contact area: 1,770 in.2 / 1.14 m2 (1,770 in.2 / 1.14 m2)

Specifications are subject to change without notice.

* SAE J818 standards define operating capacities of rubber-tired skid steers (50% tipping

load) and tracked loaders (35% tipping load).There are no standards defining the operating

capacity of machines equipped with a suspended undercarriage or machines with rubber

tracks.

EEnnggiinneePPTT--5500((PPTT--6600))

Model: Perkins 404C-22 (Perkins 404C-22T)

Type: 4-cylinder diesel (4-cylinder turbo diesel)

Displacement: 134 in.3 / 2.2 liter (134 in.3 / 2.2 liter)

Gross HP @ 2800 rpm: 50 hp / 37.3 kW (60 hp / 44.7 kW)

Torque (peak): 105 ft-lb / 143 Nm (140 ft-lb / 190 Nm)

OOppeerraattiinnggSSppeecciiffiiccaattiioonnss

Operating capacities:

35% tip load: 1,330 lb / 603 kg (1,330 lb / 603 kg)

50% tip load: 1,900 lb / 862 kg (1,900 lb / 862 kg)

Travel speed, max.: 8 mph / 13 km (8 mph / 13 km)

AAuuxxiilliiaarryyHHyyddrraauulliiccPPuummpp

Flow, max.: 17.4 gpm / 65.9 lpm (17.4 gpm / 65.9 lpm)

Pressure: 3,000 psi / 20,670 kPa (3,000 psi / 20,670 kPa)

SSeerrvviicceeRReeffiillllCCaappaacciittiieess

Fuel tank: 15 gal / 56.8 L (15 gal / 56.8 L)

Hydraulic tank: 8 gal / 30.3 L (8 gal / 30.3 L)

Engine coolant: 2 gal / 7.5 L (2 gal / 7.5 L)

Engine oil, including filter: 2.8 gal / 10.6 L (2.8 gal / 10.6 L)

MMAACCHHIINNEESSPPEECCIIFFIICCAATTIIOONNSS

Product ID Number

The machine PIN is located on the left

side of the firewall, next to the seat

(shown above). Always provide the PIN

when contacting the dealer about parts,

service, warranty or accessories.

Warranty claims will not be processed

unless the PIN number is provided.

MMAACCHHIINNEELLAABBEELLSSAANNDDDDEECCAALLSS

1. Warm engine prior to operating the machine.

2. Carry loads low. Load, unload and turn on level ground.

3. On inclines, travel with the heaviest end of the machine facing uphill.

4. Passengers are not permitted in or on the machine at any time.

5. Never use an attachment as a work platform.

Failure to comply with these instructions may result in machine damage, injury, or death.

Operating Guidelines

2040-121

Fire Prevention

Rubber track loaders have components

that operate at high temperatures. The

main heat sources are the engine and

the exhaust system. The electrical sys-

tem can also be a source of heat or

sparks if damaged or improperly main-

tained.

In some work environments, flammable

items such as leaves, straw, and brush

cutting debris may come in contact with

these components. It is very important

that flammable items be removed often

from close proximity to these high tem-

perature items. If debris is allowed to

accumulate, a fire may result posing a

risk to the operator and the machine. A

fire can cause machine damage, severe

injury, or even death.

Overheat Prevention

The radiator/oil cooler must be inspected

for signs of clogging and cleaned daily or

more often as needed to prevent the

engine and hydraulic system from over-

heating

Listed are a set of precautionary tasks

that should be performed daily or more

often if necessary. Repair or replace

worn or damaged components as

needed to ensure safe machine opera-

tion.

Precautionary Tasks

• With the engine off and cool, clean

dirt/debris from the radiator/oil cooler,

engine compartment, exhaust system,

attachments and other areas where

there may be hot or rotating parts.

Remove the belly pans and pressure

wash these items and all surrounding

areas until clean.

• Check battery, fuse panel, electrical

wiring and connections for damage or

looseness.

• Check fuel and hydraulic lines/hoses

for leaks or damage. Never use bare

hands to check for leaks. Pressurized

fluid can penetrate skin and cause

injury or even death.

1. Remove any attachment

from the machine.

2. Have an second person

remove the lift arm brace.

3. Raise the lift arms.

4. Have the second person

place the lift arm brace onto the

top side of the cylinder ram.

5. Install the retaining pins

using the holes labeled with the

arrows.

6. Slowly lower the lift arms

until they contact the brace.

7. Reverse these steps to

disengage the lift arm brace

WARNING

If instructions to safely install

lift arm brace are not followed

injury or death could result.

NEVER GO BENEATH UNSECURED LIFT ARMS

0201-752

• Never use ether or any other aerosol type starting aid to start the engine.

• Always stop the engine and allow the machine to cool before adding fuel.

• Never smoke or allow open flame near the machine while refueling.

FFIIRREEAANNDDOOVVEERRHHEEAATTPPRREEVVEENNTTIIOONN

WARNING

Operating Capacity

The operating capacity is a percentage

of the machine’s tipping load. Tipping

load refers to the amount of weight

required to tip the machine forward when

applied to the center of gravity of the

standard dirt bucket.

This rating is calculated with the machine

on level ground and the bucket attach-

ment installed, curled and raised until at

its furthest point from the machine in the

lift arm travel path.

The Rated Operating Capacity is then

calculated as 35% of the tipping load for

traditional track loaders and 50% of the

tipping load for wheeled skid steer load-

ers. ASV publishes both figures for refer-

ence and comparison.

Note: SAE J818 standards define oper-

ating capacities of rubber-tired skid

steers (50% tipping load) and tracked

loaders (35% tipping load). There are no

standards defining the operating capacity

of machines equipped with a suspended

undercarriage or machines with rubber

tracks.

Gross Vehicle Weight

The GVW (Gross Vehicle Weight) of the

PT-50 or PT-60 should not exceed 8,500

lbs. This weight does not include an

operator, but does include any acces-

sories, attachments or material being

carried. Operating the machine in excess

of the GVW will void the warranty (see

page 2).

OOPPEERRAATTIINNGGCCAAPPAACCIITTYY

Loader and Drive Controls

The PT-50 and PT-60 have two hydraulic

pilot joystick controls. The joysticks are

used to control machine speed and

direction as well as lift arm, bucket, and

attachment functions. Joystick A (photo

right) is used to control the lift arms,

bucket, and to engage the float function.

To activate the float function, move the

joystick fully forward in a quick motion.

The joystick will then be held in detent

by the magnet attached to the joystick

base. Pull back quickly to disengage.

Joystick B controls the direction and

speed of the machine.

Control Options

Machines are available with a "Case"

style control configuration. Machines

equipped in this manner use similar joy-

sticks, but operate using a different pat-

tern to control machine function. In this

pattern, joystick A controls both the right

track and the bucket curl and dump func-

tions. Joystick B controls the left track,

lift arm, and float functions. The float

function does not have a detent position

in this configuration and must be manu-

ally held in position while operating with

float engaged.

Throttle

The throttle (C) controls engine rpm.

Use a lower rpm for work that requires

delicate operation of the machine. Use

higher rpm when faster travel speed,

higher horsepower, or more flow is

required.

• To Increase RPM, move the lever (C)

toward the front of the machine.

• To decrease RPM, move the lever (C)

toward the rear of the machine.

MMAACCHHIINNEECCOONNTTRROOLLSS

Dash Panel

There are many switches and instru-

ments involved in the operation of PT

machines. Learn the location and func-

tion of these items prior to operation.

Switch Panels

D - Lights, front and rear

E - Heater Fan (optional)

F - Front wiper (optional)

G - Beacon (optional)

M - Ignition, glow plug (pre-heat)

N - Continuous Flow Hydraulics

O - (not used)

P - Bucket Positioning (optional)

Q - Power Quick Attach (optional)

Instruments

H - Tachometer (optional PT-50)

I - Engine Temp. Gauge (optional PT-50)

J - Fuel Level Gauge

K - Warning Indicators (4-in-one)

L - Hour Meter

R - High Range Indicator Light (PT-60)

S - Glow Plug Operation Light

T - Oil Pressure Warning Light

U - Battery Voltage Warning Light

V - Hydraulic Oil Temp. Warning Light

W - Engine Temp. Warning Light

If the battery voltage warning light (U)

illuminates, drive the machine to a suit-

able location and shut the engine off.

Diagnose the problem and make needed

repairs before continuing to operate.

The glow plug operation light (S) will illu-

minate only when the key switch is

turned to engine pre-heat, showing nor-

mal operation.

SSWWIITTCCHHEESS//IINNSSTTRRUUMMEENNTTAATTIIOONN

Should the optional engine temp.

gauge read excessive temperatures

(or warning light illuminate) or should

the oil pressure or hydraulic oil temp.

lights illuminate during normal opera-

tion, shut the machine down immedi-

ately. Diagnose and make needed

repairs before resuming operation.

CAUTION

DE F G H I J K L M NOP Q

R S

Andere Handbücher für PT60

Andere ASV Nutzfahrzeug Handbücher

ASV

ASV ST50 Scout Bedienungsanleitung

Beliebte Nutzfahrzeug Handbücher anderer Marken

Polaris

Polaris ACE 900 SP Bedienungsanleitung

TrailMax

TrailMax T-12-UR Bedienungsanleitung

Floe

Floe Cargo Max 9.5-73 Bedienungsanleitung

Toro

Toro 07277 Workman 2110 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn B0-050-00 Handbuch

Toro

Toro 133-7128 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn ET 3000 Bedienungsanleitung

Kayo

Kayo S70 Bedienungsanleitung

Range Road

Range Road RR608 Bedienungsanleitung

Landoll

Landoll 900D Series Bedienungsanleitung

SSI SCHAEFER

SSI SCHAEFER WEASEL LITE Bedienungsanleitung

Club Car

Club Car TURF 272 2005 Handbuch

pronovost

pronovost PUMA-10000 Bedienungsanleitung

Toro

Toro 07059TC Bedienungsanleitung

Cushman

Cushman Turf Truckster 84069 Bedienungsanleitung

BERG

BERG Large Trailer Bedienungsanleitung

Cub Cadet

Cub Cadet Big Country 641 Bedienungsanleitung

Westward

Westward Go-4 XTR Bedienungsanleitung