Telephone operation
Operation Steps
Making a call To make a home call
Press HOME or /SPEAKER -> Enter the telephone number.
To make a cell call
Press CELLULAR -> Enter the telephone number -> DIAL.
On-hook dialing
(predialing)
To predial a home call
Enter the telephone number -> Press HOME or
/SPEAKER to call.
To predial a cell call
Enter the telephone number -> Press CELLULAR to call.
Answering a call To answer a home call
Press HOME or /SPEAKER.
To answer a cell call
Press CELLULAR.
Ending a call To end a home call
Press OFF or put the handset to the telephone base
or charger.
To end a cell call
Press OFF or put the handset to the telephone base
or charger.
Handset
speakerphone
During a call, press /SPEAKER to switch between
handsfree speakerphone and normal handset use.
Redial To dial a redial entry using the home line
Press REDIAL repeatedly to select the desired entry ->
HOME or /SPEAKER to call.
To dial a redial entry using the cell line
Press REDIAL repeatedly to select the desired entry ->
CELLULAR
to call.
Volume control Press VOLUMEqto decrease or press VOLUMEpto
increase the listening volume during a call.
Call waiting
(Requires subscription
from telephone
service provider)
On home line
Press FLASH to put current call on hold and to take the
new call; press again to switch back and forth between calls.
On cell line
Press CELLULAR to put current call on hold and to
take the new call; press again to switch back and forth
between calls.
-OR-
Press SWAP to switch. To switch back, press OPTION ->
qor pto highlight Swap -> SELECT.
For more detailed instructions, please refer to the TL92271/TL92321/TL92371/
TL92421/TL92471 DECT 6.0 cordless telephone/answering system with
BLUETOOTH® wireless technology user’s manual provided in your package, or
see the online user’s manual at www.telephones.att.com/manuals.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks
by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech
Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of
their respective owners.
© 2011-2014 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 7.0 AT&T 04/14.
Caller ID
This product supports caller ID services offered by most telephone service providers.
The telephone stores caller ID information of the last 50 incoming calls in the
telephone base. This information is common to all devices.
Missed call indicator
When a handset is in idle mode and has new or missed calls, its screen shows
XX Missed calls.
You can erase the missed call indicator either by reviewing the call log one by
one, or by pressing and holding CANCEL on the handset in idle mode.
Review and dial a number in the call log
1. CID in idle mode -> qor pto select the desired line -> REVIEW.
2. qor pto scroll through the list.
3.
HOME
or
/SPEAKER
to dial with the home line.
-OR-
CELLULAR to dial with the cell line.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. You can turn this feature off for the base or each
individual handset, or both.
1. MENU -> qor p-> Settings -> SELECT.
2. qor p-> Caller ID Annc -> SELECT.
3. qor pto choose Handset or Base -> SELECT.
4. qor pto choose On or Off -> SET.
Directory
The home directory can store up to 200 entries, which are shared by all
system devices.
Operation Steps
Adding an entry
in the home
directory
1. MENU.
2. qor p-> Directory -> SELECT.
3. OPTION to select Home
4. SELECT to select Add contact.
5. Enter a telephone number up to 30 digits -> SELECT.
6. qor pto select Home, Cell, Work or Other -> NEXT.
7. Enter a name up to 15 characters -> SAVE.
Searching/dialing
an entry
1. DIR in idle mode -> qor pto select the desired line ->
REVIEW.
2. Press qor pto browse through the directory, or press
the dialing keys (0-9) to start a name search.
3. Press HOME or /SPEAKER to call using the
home line.
-OR-
Press CELLULAR to call using the cell line.
Answering system
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages:
those left on the built-in answering system and those left at your telephone
service provider’s voicemail. To listen to messages recorded on the built-in
answering system, refer to the Message playback section below; to listen to
voicemail, contact your telephone service provider for more information.
Turn answering system on/off
The answering system must be turned on to answer and record messages.
Using the telephone base:
Press
/ANS ON
to turn the answering system on or off. If the answering
system is turned on, it announces, “Calls will be answered.” If the answering
system is turned off, it announces, “Calls will not be answered.”
Message alert tone
When this feature is on, and there is at least one new message, the telephone
base beeps every 10 seconds.
1. MENU -> qor p-> Answering sys -> SELECT.
2. qor p-> Ans sys setup -> SELECT.
3. qor p-> Msg alert tone -> SELECT.
4. qor pto choose On or Off -> SET.
Call screening
Use this feature to choose whether incoming messages can be heard over at
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message at the telephone base. While monitoring an incoming
message, you can answer the call by pressing HOME or /SPEAKER on
the handset.
1. MENU -> qor p-> Answering sys -> SELECT.
2. qor p-> Ans sys setup -> SELECT.
3. SELECT to select Call screening.
4. qor pto choose On or Off -> SET.
Message playback
Using the telephone base:
Press /PLAY when the telephone base is in idle mode.
Using a handset:
1. MENU.
2. SELECT to select Play messages.
Options during playback
Feature On the telephone base On a handset
Adjust playback volume Press q/VOLUME/pPress qVOLUME or
pVOLUME
Stop playback Press /STOP Press OFF
Skip to the next message Press /SKIP Press SKIP
Repeat the message Press /REPEAT Press REPEAT
Play the previous message Press /REPEAT twice Press REPEAT twice
Delete the message Press X/DELETE Press DELETE
Bluetooth®setup
The following are a few common Bluetooth features to set. Refer to the Bluetooth
setup section in the user’s manual provided in the package for more details.
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base,
keep the device within 15 feet of the telephone base for optimal performance.
Add a cell phone
To pair and connect a cell phone using a cordless handset:
1. MENU -> qor p-> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. qor p-> Add cellular -> SELECT.
4. Disconnect the cell phone from any Bluetooth device -> NEXT.
5. Place the cell phone next to the telephone base.
6. NEXT to turn on the telephone base discoverable mode.
7. Turn on the Bluetooth feature of your cell phone and search for or add new
advices.
8. Enter the cell phone passcode (typically 0000) if required -> SET.
9. Enter the PIN (default PIN: 0000) of the telephone base into your cell phone.
Add a headset
To pair and connect a headset using a cordless handset:
1. MENU -> qor p-> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. qor p-> Add headset -> SELECT.
4. Disconnect your headset from any Bluetooth device -> NEXT.
5. Set your headset to discoverable mode -> NEXT.
6. qor pto choose your headset -> SELECT.
7. Enter the PIN (typically 0000) of your headset and press NEXT.
Download directory
Before downloading a directory, make sure the cell phone is paired, active, and
connected to your TL92271/TL92321/TL92371/TL92421/TL92471.
To download a cell phone directory using a cordless handset.
1. MENU -> qor p-> Bluetooth -> SELECT.
2. qor p-> Download dir -> SELECT.
3. qor pto select the desired device if necessary -> SELECT.
4. qor p-> Phone memory, SIM card only or Phone and SIM -> SELECT.
5. Enter the cell phone passcode if necessary, then press SET.
6. Press OK to return to the Bluetooth menu when the download
is complete.
