AT&T CL81309 - AT&T DECT 6.0 Bedienungsanleitung

Quick start guide

CL81109/CL81209/CL81309

DECT 6.0 cordless

telephone with caller ID/

call waiting

See pages 4-5

for easy instructions.

You must install and charge

the battery before using the

telephone. STOP!

Installation

Install the telephone base close to a telephone jack and a power outlet not

controlled by a wall switch. The telephone base can be placed on a flat surface

or vertically mounted on the wall (read the user’s manual for details). For

optimum range and better reception, place the telephone base in a central and

open location.

If you subscribe to high-speed Internet service (digital subscriber line -

DSL) through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (see the following page). The

filter prevents noise and caller ID problems caused by DSL interference. Please

contact your DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset or

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as: television sets, VCRs, or other cordless

telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of the washing machine or

workbench.

•

Telephone base installation

Install the telephone base as shown below.

The telephone base is ready for tabletop use. If you want to change to wall

mounting, read the user’s manual for details.

IMPORTANT INFORMATION

1. Use only the power adapter(s) supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

1. Plug the small end

of the power adapter

into the power jack

on the bottom of the

telephone base.

2. Route the power

adapter cord

through the slot.

3. Plug one end of the

telephone line cord

into the telephone jack

on the bottom of the

telephone base.

4. Place the cords into

the channels.

6. Plug the large end

of the power adapter

into a power outlet

not controlled by a

wall switch.

If you have

DSL high speed

Internet service,

a DSL filter (not

included) is

required.

5. Plug the other end

of the telephone line

cord into a telephone

jack or a DSL filter.

7. Raise the antenna.

Charger installation

Install the charger as shown below.

Plug the power adapter

into an electrical outlet

not controlled by a wall

switch.

IMPORTANT INFORMATION

1. Use only the power adapter(s) supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

Battery installation & charging

Install the battery as shown below. After installing the battery, you can make

and receive short calls. Place the handset in the telephone base or charger

when not in use. For optimal performance, charge the handset battery for at

least 16 hours before use. See the table on Technical specifications page of

the user’s manual for battery operating times.

If the battery is depleted, it may take approximately 10 minutes to charge

the handset before it shows LOW BATTERY. The screen continues to display

LOW BATTERY until the battery has charged for approximately one hour; the

backlight on the handset disables when in LOW BATTERY mode.

Battery indicators Battery status Action

The screen is blank. Battery has no charge and

the handset cannot be used.

Charge until the screen shows

LOW BATTERY (about 10

minutes).

The screen shows PLACE IN

CHARGER and flashes.

Battery has very little charge

and the handset cannot be

used.

Charge until the screen shows

LOW BATTERY (about four

minutes).

The screen shows LOW

BATTERY, flashes, and

the handset beeps.

Battery has enough charge

to be used for a short time.

Charge until the screen shows

HANDSET X (about one hour).

The screen shows

HANDSET X.

Battery is charged. To keep the battery charged,

place it in the telephone base or

charger when not in use.

Step 1

Plug the battery connector

securely into the socket

inside the handset battery

compartment, matching the

color-coded label. Insert

the supplied battery with

the label THIS SIDE UP

facing up as indicated.

Step 2

Align the cover flat against

the battery compartment,

then slide it upwards until it

clicks into place.

Battery installation & charging

Step 3

Charge the handset by placing it face up in the

telephone base or charger. The CHARGE light is on when

charging.

IMPORTANT INFORMATION

1. Use only the supplied rechargeable battery or replacement battery (model BT8001).

To order, visit our website at www.telephones.att.com or call 1 (800)

222-3111. In Canada, dial 1 (866) 288-4268.

2. If you do not use the handset for a long time, disconnect and remove the battery to

prevent possible leakage.

CHARGE light

Quick reference guide - handset

CHARGE indicator

On when the handset is

charging in the telephone base

or charger.

qCID/-VOLUME

Press qCID to show caller ID

history.

Press to scroll down while in

menus.

While entering names or

numbers, press to move the

cursor to the left.

Press to decrease the listening

volume when on a call.

PHONE/FLASH

Press to make or answer a call.

During a call, press to answer

an incoming call when you

receive a call waiting alert.

While reviewing a call log

entry, press repeatedly to

add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory.

MENU/SELECT

Press to show the menu.

While in the menu, press to

select an item or save an entry

or setting.

DIRp/+VOLUME

Press DIRpto show directory

entries.

Press to scroll up while in

menus.

While entering names or

numbers, press to move the

cursor to the right.

Press to increase the listening

volume when on a call.

OFF/CLEAR

During a call, press to hang up.

While in a menu, press to

cancel an operation, back up to

the previous menu, or exit the

menu display.

Press and hold while the

telephone is not in use to erase

the missed calls indicator.

Press repeatedly to display

other dialing options when

reviewing a call log entry.

REDIAL/PAUSE

Press repeatedly to view the

last five numbers dialed

While entering numbers, press

and hold to insert a dialing

pause.

INT

Press to begin an intercom

conversation or to transfer a

call.

MUTE/DELETE

During a call, press to mute the

microphone.

While reviewing the caller ID

history, the directory or the

redial memory, press to delete

an individual entry.

While predialing, press to

delete digits.

SPEAKER

Press to switch between

speakerphone and handset.

Quick reference guide - handset

Main menu

> Shows a highlighted

item

>DIRECTORY

CALL LOG

Main menu

DIRECTORY

CALL LOG

RINGER VOLUME

RINGER TONE

KEY TONE

LCD LANGUAGE

SET DATE/TIME

CLR VOICEMAIL

HOME AREA CODE

Using menus

Press MENU/SELECT to show the first menu

item, DIRECTORY.

Press qCID or DIRpto scroll through menu

items.

Press MENU/SELECT to select or save

changes to a highlighted menu item.

Press OFF/CLEAR to cancel an operation,

back up to the previous menu, or exit the

menu display.

Quick reference guide - telephone base

IN USE indicator

On when the handset is

in use or when you are

registering a handset.

Flashes when another

telephone is in use on the

same line, or when you are

de-registering handset(s)

from the telephone base.

Flashes quickly when there

is an incoming call.

VOICEMAIL indicator

Flashes when you have new

voicemail. Voicemail service

is offered by your local

telephone company.

HANDSET LOCATOR

Press to make handsets

beep so you can locate

them.

www.telephones.att.com

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a

AT&T Intellectual Property licensed to Advanced American Telephones,

San Antonio, TX 78219. Printed in China. Issue 2 AT&T 02/09.

Andere Handbücher für CL81309 - AT&T DECT 6.0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AT&T Schnurloses Telefon Handbücher

AT&T

AT&T BL102-3S Bedienungsanleitung

AT&T

AT&T EL52109 - AT&T DECT 6.0 Bedienungsanleitung

AT&T

AT&T E2803B Bedienungsanleitung

AT&T

AT&T E5915B Bedienungsanleitung

AT&T

AT&T BL102-2 Bedienungsanleitung

AT&T

AT&T EL52201 Bedienungsanleitung

AT&T

AT&T 1440 Bedienungsanleitung

AT&T

AT&T EL51100 Bedienungsanleitung

AT&T

AT&T 3658B Bedienungsanleitung

AT&T

AT&T EL52109 - AT&T DECT 6.0 Bedienungsanleitung

AT&T

AT&T E5917 Bedienungsanleitung

AT&T

AT&T CL83113 Bedienungsanleitung

AT&T

AT&T E5862 Bedienungsanleitung

AT&T

AT&T E2115 Bedienungsanleitung

AT&T

AT&T 2320 Bedienungsanleitung

AT&T

AT&T CL83114 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

AT&T

AT&T DL72130 Bedienungsanleitung

AT&T

AT&T CL82113 Bedienungsanleitung

AT&T

AT&T 9371 Bedienungsanleitung

AT&T

AT&T EL52100 Bedienungsanleitung

AT&T

AT&T EL51109 Bedienungsanleitung

AT&T

AT&T CRL32102 Bedienungsanleitung

AT&T

AT&T CL81109 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung