AT&T EL52100 Bedienungsanleitung

Quick start guide

EL52100/EL52110

DECT 6.0 cordless

telephone/answering

system with caller ID/

call waiting

Introduction

This quick start guide provides you with basic installation and use instructions. A limited

set of features are described in abbreviated form.

Please refer to the complete online EL52100/EL52110 DECT 6.0 cordless

telephone/answering system with caller ID/call waiting user’s manual for a full set

of installation and operation instructions at

http://telephones.att.com/EL521X0.

Before using this AT&T product, please read Important safety information on pages 22-23

of this quick start guide.

Table of contents

Parts checklist..........................................................2

Installation.................................................................3

Battery installation................................................4

Battery charging.....................................................5

Handset overview...................................................6

Telephone base overview...................................7

Menu overview.........................................................8

Menu structure ........................................................8

Telephone settings ................................................9

Making, answering and ending a call........10

Options while on a call.................................... 11

Handset locator....................................................12

Directory .................................................................. 13

Speed dial ...............................................................14

Caller ID overview............................................... 15

Caller ID history (call log)............................... 15

Answering system and voicemail................ 16

Turning the answering system

on or off ............................................................16

Announcement ..................................................... 16

Call screening ....................................................... 17

Message playback............................................... 17

To delete all old messages ............................17

Remote access......................................................17

Troubleshooting ...................................................18

Important safety information ........................ 22

FCC Part 68 and ACTA...................................... 24

FCC Part 15............................................................ 25

Limited warranty..................................................26

Technical specifications ................................... 28

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Cordless handset Wall mount bracket

Telephone base Power adapter for

telephone base

Quick start guide

Battery compartment cover Telephone line cord

Battery for cordless handset

Quick start guide

EL52100/EL52110

DECT 6.0 cordless

telephone/answering

system with caller ID/

call waiting

Installation

Install the telephone base as shown below. If you subscribe to high-speed Internet service

(DSL - digital subscriber line) through your telephone line, you must install a DSL filter on

the DSL line. If you want to mount your telephone on a wall, use the included wall mount

bracket and refer to Wall mount installation in the online user’s manual for details.

IMPORTANT INFORMATION:

Use only the power adapter provided with this product. To obtain a replacement, visit our website

at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Telephone line cord

A DSL filter (not included)

is required if you have DSL

high-speed Internet service.

Telephone wall jack

Plug one end of the

telephone line cord

into the TEL. LINE

jack on the bottom of

the telephone base.

Plug the other end

of the telephone

line cord into a

telephone wall jack.

Plug the small end

of the power adapter

into the power jack

on the bottom of the

telephone base.

Electrical outlet not

controlled by a wall

switch

Plug the large end

of the power adapter

into an electrical

outlet not controlled

by a wall switch.

Route the cords

through the slots.

Battery installation

Install the battery as shown below.

IMPORTANT INFORMATION:

Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,

visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

To replace the battery, press the tab and

slide the battery compartment cover

downwards. Lift out the old battery and

disconnect it from the handset. Follow the

instructions above to install and charge the

new battery.

Charge the handset by placing it face up in

the telephone base. The CHARGE light is on

when charging.

Align the cover flat against

the battery compartment,

then slide it upwards until

it clicks into place.

3.Plug the battery

connector securely

into the socket inside

the handset battery

compartment, matching

the color-coded label.

1. Insert the supplied battery

with the label THIS SIDE

UP facing up as indicated.

CHARGE light

Battery charging

Once you have installed the battery, the screen indicates the battery

status (see the table below). If necessary, place the handset in the

telephone base to charge the battery. For best performance, keep

the handset in the telephone base when not in use. The battery is

fully charged after 10 hours of continuous charging. See page 28 for

battery operating times.

If the screen is blank, you need to charge the handset without

interruption for at least 30 minutes to give the handset enough charge to use the

telephone for a short time. The screen shows LOW BATTERY until you have charged the

battery without interruption for at least 30 minutes. The following table summarizes the

battery charge indicators and actions to take.

Battery indicators Battery status Action

The screen is blank or shows

PLACE IN CHARGER.

The battery has no or very

little charge. The handset

cannot be used.

Charge without interruption

until the screen shows

LOW BATTERY or HANDSET 1

(at least 30 minutes).

The screen shows

LOW BATTERY and flashes.

The battery has enough charge

to be used for a short time.

Charge without interruption

until the screen shows

HANDSET 1 (at least

30 minutes).

The screen shows HANDSET 1

and the battery icon shows

, or .

The battery is charged. To keep the battery charged,

place it in the telephone base

when not in use.

NOTES:

If you are on a call in low battery mode, you hear four short beeps every 50 seconds.

When you place the handset in the telephone base, if no battery is installed in that handset, the

CHARGE light is off and the screen shows NO BATTERY. Follow the instructions in

Battery installation on page 4 to install the battery.

•

Battery status icon

11/20

HANDSET 1

16 MISSED CALLS

10:30PM

Handset overview

REDIAL/PAUSE

Press repeatedly to view the

last 20 numbers dialed.

While entering numbers,

press and hold to insert a

dialing pause.

PHONE/FLASH

Press to make or answer a

call.

During a call, press to answer

an incoming call when you

receive a call waiting alert.

While reviewing a caller ID

history entry, press repeatedly

to add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory.

While entering names in the

directory, press to add a space.

MUTE

During a call, press to mute

the microphone.

TONE

During a call, press to send

touch-tone signals.

SPEAKER

Press to turn on the handset

speakerphone. Press again to

resume normal handset use.

DELETE

While predialing, press to

delete digits.

While reviewing the redial

list, directory, speed dial list

or caller ID history, press to

delete an individual entry.

DIR/VOLUME

Press to scroll up while in

menus.

Press to increase the listening

volume.

Press to show directory entries

when the handset is not in use.

While entering names or

numbers in the directory, press

to move the cursor to the right.

CID/VOLUME

Press to scroll down while in

menus.

Press to decrease the listening

volume.

Press to show the caller ID

history when the handset is

not in use.

While entering names or

numbers in the directory, press

to move the cursor to the left.

MENU/SELECT

Press to display the menu.

Once in the menu, press to

select an item or save an

entry or setting.

OFF/CLEAR

During a call, press to hang up.

While using menus, press to

cancel an operation, back up

to the previous menu, or exit

the menu display.

Press and hold while the

handset is not in use to erase

the missed calls indicator.

When reviewing a caller ID

history entry, press repeatedly

to view the dialing options.

Telephone base overview

ANSWER ON/OFF

Press to turn the built-in answering system on

or off.

Message window

Displays the number of messages. During

playback, it displays the message number

currently playing.

PLAY/STOP

Press to start or stop message playback.

While call screening, press to temporarily turn

the call screening on or off.

DELETE

Press to delete the message currently playing.

Press twice to delete all old messages when

the telephone is not in use.

SKIP

Press to skip a message.

REPEAT

After the answering system plays the day and

time the current message was received, press

to repeat the message currently playing.

While the answering system is playing the day

and time the current message was received,

press to listen to the previous message.

HANDSET LOCATOR

Press to make the handset beep so you can

locate it.

VOLUME

While the telephone is not in use, press to

adjust the telephone base ringer volume.

During call screening or message playback,

press to adjust the listening volume.

Menu overview

Use the menu to change the telephone settings.

Press MENU/SELECT in idle mode (when the handset is not in use)

to enter the main menu.

Press DIR or CID to scroll until the >is next to the feature you

want to select.

Press MENU/SELECT to select or save the indicated item.

Press OFF/CLEAR to cancel an operation, back up to the

previous menu or exit the menu display. Press and hold

OFF/CLEAR to cancel an operation and return to idle mode.

Menu structure

3. The handset is in

idle mode.

11/20

HANDSET 1

16 MISSED CALLS

10:30PM

The > symbol indicates

the feature to select.

>PLAY MESSAGES

ANSWERING SYS

PLAY MESSAGES

ANSWERING SYS

DIRECTORY

CALL LOG

RINGERS

SETTINGS

CALL SCREENING

# OF RINGS

REMOTE CODE

MSG ALERT TONE

ANNOUNCEMENT

DELETE ALL OLD

RECORD MEMO

ANSWER ON/OFF

ANS SYS SETUP

RINGER VOLUME

RINGER TONE

LCD LANGUAGE

CLR VOICEMAIL

KEY TONE

SET DATE/TIME

HOME AREA CODE

DIAL MODE

Telephone settings

Use Menu structure on page 8 to find and set features. Many are simple yes/no

questions. The following are a few examples of common features to set. Refer to

Handset settings and Answering system settings in the online user’s manual for

detailed instructions on setting all telephone features.

Ringer volume

Set the ringer volumes individually on the handset and the telephone base.

Handset:

You can set the handset ringer volume level, or turn the ringer off. When the ringer is

off, appears on the handset screen.

On a handset, use MENU/SELECT in idle mode. Select >RINGERS

and then select >RINGER VOLUME.

Press DIR or CID to sample each volume level.

Press MENU/SELECT to save your preference.

NOTE: If the handset ringer volume is set to off, that handset ringer

is silenced for all incoming calls; however, that handset still plays the

paging tone when initiating the handset locator feature.

Telephone base:

When the telephone is not in use, press VOLUME on the

telephone base to adjust the ringer volume.

Date and time

The answering system announces the day of the week and time of each message

received prior to playing it. If you subscribe to caller ID service, the day, month and

time are set automatically with each incoming call. However, the year must be set so

that the day of the week can be calculated from the caller ID information.

On a handset, use MENU/SELECT in idle mode. Select >SETTINGS and then select

>SET DATE/TIME.

Use the dial pad keys (0-9) to enter two-digit numbers for the month, day and year.

Press MENU/SELECT.

Use the dial pad keys (0-9) to enter two-digit numbers for the hour and minute.

Press DIR or CID to choose AM or PM. Press MENU/SELECT to confirm.

RINGER VOLUME

Andere Handbücher für EL52100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AT&T Schnurloses Telefon Handbücher

AT&T

AT&T Z331 Bedienungsanleitung

AT&T

AT&T 9110 Bedienungsanleitung

AT&T

AT&T CLP99283 Bedienungsanleitung

AT&T

AT&T EL51103 Bedienungsanleitung

AT&T

AT&T 9465 Bedienungsanleitung

AT&T

AT&T CL83101 Bedienungsanleitung

AT&T

AT&T CRL81112 Bedienungsanleitung

AT&T

AT&T TL86109 Bedienungsanleitung

AT&T

AT&T ATT E5865 - AT&T E5865 5.8 GHz DSS Expandable Cordless... Bedienungsanleitung

AT&T

AT&T Voice DNA Bedienungsanleitung

AT&T

AT&T TL72108 Bedienungsanleitung

AT&T

AT&T CL82351 Bedienungsanleitung

AT&T

AT&T CL82113 Bedienungsanleitung

AT&T

AT&T CL81101 Bedienungsanleitung

AT&T

AT&T E5915B Bedienungsanleitung

AT&T

AT&T E5804 Bedienungsanleitung

AT&T

AT&T EL52109 - AT&T DECT 6.0 Bedienungsanleitung

AT&T

AT&T DECT TL91178 Bedienungsanleitung

AT&T

AT&T CL82143 Bedienungsanleitung

AT&T

AT&T TL74108 Bedienungsanleitung

AT&T

AT&T MLC-6 Bedienungsanleitung

AT&T

AT&T 7230 Bedienungsanleitung

AT&T

AT&T CL80115 Bedienungsanleitung

AT&T

AT&T EL52265 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung