AT&T TL92271 Bedienungsanleitung

Quick start guide

TL92271/TL92371/TL92471

DECT 6.0 cordless telephone/

answering system with

BLUETOOTH®wireless technology

Install the telephone base close to a telephone jack and a power outlet

not controlled by a wall switch. The telephone base can be placed on a flat

surface or vertically mounted on the wall. For optimum range and better

reception, place the telephone base in a central and open location.

You may hear interference if your cellular phone is too close to the

telephone base during a CELLULAR call. Make sure that your Bluetooth

enabled cellular phone is within 15 feet of the telephone base in order to

maintain a clear and consistent connection between your Bluetooth cell

phone, telephone base and cell tower.

If you subscribe to high-speed Internet service (digital subscriber line -

DSL) through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (page 2). The filter prevents

noise and caller ID problems caused by DSL interference. Please contact your

DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset

or telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing machine or

work bench.

•

You must install and charge

the handset battery before

using the cordless handset.

See page 3 for easy

instructions.

Installation

IMPORTANT INFORMATION:

Use only the power adapter(s) provided with this product. To obtain a replacement, visit our

website at www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

Plug the power adapter into an electrical outlet not

controlled by a wall switch.

Telephone base and charger installation

If you subscribe to high-speed Internet service (digital subscriber line - DSL)

through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack. The filter prevents noise and

caller ID problems caused by DSL interference. Please contact your DSL service

provider for more information about DSL filters.

Follow the steps below to install the telephone.

Telephone base installation

Plug the other end of the

telephone line cord into the

telephone jack on the bottom

of the telephone base.

A DSL filter (not included)

is required if you have DSL

high-speed Internet service.

Telephone line cordRoute the cords

through the guides.

Plug the small end of the

larger power adapter into the

power jack on the bottom of

the telephone base.

Plug the large end of the

larger power adapter into an

electrical outlet not controlled

by a wall switch.

Plug one end of the

telephone line cord into

a telephone wall jack.

Raise the antenna.

Telephone base installation

Battery installation and charging

Install the battery as shown below.

Step 1

Plug the battery connector securely

into the socket inside the handset

battery compartment, matching the

color-coded label. Insert the supplied

battery with the label THIS SIDE UP

facing up as indicated.

Step 2

Align the cover flat against the

battery compartment, then slide it

upwards until it clicks into place.

IMPORTANT INFORMATION:

Use only the supplied rechargeable battery or replacement battery (model BT166342). To

order, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

If you do not use the handset for a long time, disconnect and remove the battery to prevent

possible leakage.

•

CHARGE light

Step 3

Charge the handset by placing it face up in the telephone

base or charger. The CHARGE light is on when charging.

SET DATE

--/--/--

MM/DD/YY

BACK SET

SET TIME

--:-- --

BACK SET

After you install your telephone or power returns

following a power outage, the handset will prompt

you to set the date and time. For instructions, see

Set date and time on page 9. To skip setting the

date and time, press OFF/CANCEL or BACK.

Quick reference guide - handset

CHARGE light

On when the handset is charging in the

telephone base or charger.

Softkeys (2)

Press to select a menu item displayed above

the key.

While in a menu, press to select an item or

save an entry or setting.

CELLULAR

Press to make or answer a cell call.

During a cell call, press to answer an incoming

call when you hear a call waiting alert.

Flashes quickly when there is an incoming

cell call.

Flashes slowly when a cell call is on hold.

HOME/FLASH

Press to make or answer a home call.

During a home call, press to answer an

incoming call when you hear a call waiting

alert.

Flashes quickly when there is an incoming

home call or when the answering system is

recording a call.

Flashes slowly when a home call is on hold.

While reviewing a caller ID history entry, press

repeatedly to add or remove 1in front of the

telephone number before dialing or saving it in

a directory.

TONE

Press to switch to tone dialing temporarily

during a call if you have pulse service.

Press to toggle the name order when saving a

caller ID log entry into a directory.

/SPEAKER

Press to make or answer a home or cell call

using the speakerphone.

Press to turn on the handset speakerphone.

Press again to resume normal handset use.

REDIAL/PAUSE

Press repeatedly to view the last 10 numbers

dialed.

While entering numbers, press and hold to

insert a dialing pause.

Quick reference guide - handset

DIR /VOLUME

Press to scroll up while in menus.

During a call or message playback, press to

increase the listening volume.

Press to show directory entries when the

telephone is not in use.

While entering names or numbers in the

directory, press to move the cursor to the left.

MUTE/DELETE

During a call, press to mute the microphone.

While predialing, press to delete digits.

While reviewing the redial list, directory or caller ID

history, press to delete an individual entry.

While entering or editing a directory entry, press

to erase a digit or character.

While the handset is ringing, press to silence the

ringer temporarily.

During message or announcement playback,

press to delete a message or announcement.

OFF/CANCEL

While using menus, press to cancel an operation,

back up to the previous menu, or exit the menu

display.

Press and hold to return to idle mode.

During a call, press to hang up.

Press and hold while the telephone is not in use

to erase the displayed messages (XX Missed

calls and Download fail).

While the handset is ringing, press to silence the

ringer temporarily.

CID /VOLUME

Press to scroll down while in menus.

During a call or message playback, press to

decrease the listening volume.

Press to show the caller ID history when the

telephone is not in use.

While entering names or numbers in the

directory, press to move the cursor to the right.

# (pound key)

Press repeatedly to display other dialing options

when reviewing a caller ID history entry.

During an outside call, intercom call, message

or announcement playback, press to change the

quality of the audio to best suit your hearing.

Quick reference guide - handset

Feature menu

Play messages

Answering sys

Directory

Caller ID log

Intercom

Bluetooth

Ringers

Set date/time

Settings

Website

Main menu

The selected menu item is

highlighted.

PUSH TO TALK

Press to begin a one-to-one or

one-to-group broadcast.

Press and hold to begin a one-to-group

broadcast when the handset is not in use.

Using menus

Press MENU in idle mode (when the

telephone is not in use) to enter the

main menu.

Use CID or DIR to scroll through

menu items.

Press SELECT to select or save the

highlighted item.

-OR-

Press OFF/CANCEL to cancel an

operation, back up to the previous menu,

or exit the menu display.

-OR-

Press and hold OFF/CANCEL to

return to idle mode.

Quick reference guide - telephone base

Message counter

Number of messages (or

during playback, message

number currently playing).

IN USE light

On when the handset is in

use, when the answering

system is answering an

incoming call, or when you

are registering a handset.

Flashes when another

telephone is in use on the

same line, or when you

are deregistering handsets

from the telephone base.

Flashes quickly when there

is an incoming home call.

DEVICE1/DEVICE2 lights

On when the telephone base

is paired and connected with

a Bluetooth device.

Flash alternately while

pairing with a Bluetooth

device.

Flashes quickly when there is

an incoming cell call.

X/DELETE

Press to delete the

message currently

playing.

When the phone is not

in use, press twice to

delete all previously

reviewed messages.

/REPEAT

Press to repeat a

message or press twice

to play the previous

message.

/ANS ON

Press to turn the

answering system on

or off.

/SKIP

Press to skip to the next

message.

/HANDSET LOCATOR

Press to page all system

handsets.

Press and hold to begin

handset deregistration.

/PLAY/STOP

Press to play messages.

Press to stop message

playback.

Quick reference guide - telephone base

VOLUME

Press to adjust the volume during

message playback.

When the phone is not in use, press

to adjust the telephone base ringer

volume.

Telephone settings

Set date and time

To set the date and time manually:

Press MENU on the handset in idle mode to enter the

main menu.

Press CID or DIR to highlight Set date/time, then

press SELECT.

Press CID or DIR to select the month, then press SET,

or enter the two-digit number (01-12) using the dialing

keys (0-9).

Press CID or DIR to select the day, then press SET,

or enter the two-digit number (01-31) using the dialing

keys (0-9).

Press CID or DIR to select the year, then press SET, or

enter the two-digit number (00-99) using the dialing keys

(0-9), then press SET.

Press CID or DIR to select the hour, then press SET,

or enter the two-digit number (01-12) using the dialing

keys (0-9).

Press CID or DIR to select the minute, then press SET, or enter

the two-digit number (00-59) using the dialing keys

(0-9)

Press

CID or DIR

to highlight AM or PM, or press 2for AM

or 7for PM.

Press SET to save. You hear a confirmation tone.

NOTE: If the date and time are not set when a message is recorded, the system announces,

“Time and day not set,” before each message plays.

Caller ID announce

By default, the caller ID feature is programmed On.

To turn on/off the caller ID announce on your handset:

Press MENU on the handset in idle mode to enter

the main menu.

Press CID or DIR to highlight Settings, then

press SELECT.

Press CID or DIR to highlight Caller ID Annc, then

press SELECT.

Press CID or DIR to highlight Handset or Base, then

press SELECT.

Press CID or DIR to choose On or Off, then press SET

to save. You hear a confirmation tone.

NOTES:

See your user’s manual for complete instructions on using all

features of this telephone.

Pronunciation of names may vary with this feature. Not all names

may be pronounced correctly.

•

Intercom

Bluetooth

Ringers

Set date/time

BACK SELECT

SET DATE

09/30/10

MM/DD/YY

BACK SET

SET TIME

05:41PM

BACK SET

SETTINGS

Key tone

Dial mode

Caller ID Annc

BACK SELECT

CALLER ID ANNC

On

Off

BACK SET

CALLER ID ANNC

Handset

Base

BACK SELECT

Andere Handbücher für TL92271

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AT&T Schnurloses Telefon Handbücher

AT&T

AT&T CL84107 Bedienungsanleitung

AT&T

AT&T E5945B Bedienungsanleitung

AT&T

AT&T VIDEOPHONE 2500 Bedienungsanleitung

AT&T

AT&T EL51200 Bedienungsanleitung

AT&T

AT&T EL52201 Bedienungsanleitung

AT&T

AT&T DL72119 Bedienungsanleitung

AT&T

AT&T CL81101 Bedienungsanleitung

AT&T

AT&T BL102-2 Bedienungsanleitung

AT&T

AT&T E2903B Bedienungsanleitung

AT&T

AT&T E2801 Bedienungsanleitung

AT&T

AT&T 1440 Bedienungsanleitung

AT&T

AT&T TL86103 Bedienungsanleitung

AT&T

AT&T DLP73290 Bedienungsanleitung

AT&T

AT&T WF721 Bedienungsanleitung

AT&T

AT&T CL82115 Bedienungsanleitung

AT&T

AT&T EP5995 Bedienungsanleitung

AT&T

AT&T CLP99287 Bedienungsanleitung

AT&T

AT&T E5654B Bedienungsanleitung

AT&T

AT&T EL42208 Bedienungsanleitung

AT&T

AT&T AWX22104 Bedienungsanleitung

AT&T

AT&T E1112B Bedienungsanleitung

AT&T

AT&T CL84107 Bedienungsanleitung

AT&T

AT&T CL82350 Bedienungsanleitung

AT&T

AT&T E5937 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung