AT&T E5640 Bedienungsanleitung
User's Manual
5.8 GHz Expansion
Handset E560-2/E560-5
For use with AT&T
model E5640/E5643B/
E5644B/E5655
Congratulations on your purchase
of this AT&T product.
Before using this telephone system, you must
read Important safety information on
pages 20-24 of this manual.
NEED HELP?
Our representatives are here
to help you with any questions concerning
the operation of this product, available accessories, or
any other related issues.
Call toll free
1 (800) 222-3111
In Canada, call
1 (866) 288-4268
or visit our website at
www.telephones.att.com
Model #: AT&T E560-2/E560-5
Product name: 5.8 GHz cordless telephone
Serial #:
(found at the bottom of the handset charger)
Purchase date:
Place of purchase:
Depending on your service subscription, you may see the caller’s number, or the
caller’s name and number. This product can provide information only if both
you and the caller are in areas offering caller ID service, and if both telephone
companies use compatible equipment. The time and date are sent by the service
provider along with the call information.
Information about caller ID with call waiting
Copyright © 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
This product has a caller ID with call waiting feature which works
with service from your local telephone service provider.
Caller ID with call waiting lets you see the name of the caller
before answering the telephone, even when on another call.
You may need to change your phone service to use this
feature. Contact your telephone service provider if:
• you have both caller ID and call waiting, but as separate
services (you may need combined service).
• you have only caller ID service, or only call waiting service.
• you don’t subscribe to any caller ID or call waiting services.
You can use this product with regular caller ID service, or you
can use this product’s other features without subscribing to
either caller ID or combined caller ID with call waiting service.
There are fees for caller ID services, but these may not be
available in all areas.
IMPORTANT
You must charge the
battery and register the
handset before use. STOP! See pages 2-3
for easy instructions.
Table of contents
For customer service or product
information, visit our web site at
www.telephones.att.com
or call 1 (800) 222-3111.
Please also read
Important safety
information on pages 20-
24.
Quick reference guide ............................. 1
Before you begin....................................... 2
Parts checklist............................................ 2
Battery & charger installation................ 3
Adding new handsets............................... 4
Replacing a handset ..................................7
Re-registering a handset..........................9
Belt clip & optional headset .................11
Troubleshooting.......................................12
Important safety information ...............20
FCC Part 68 and ACTA.........................25
FCC Part 15.............................................27
Limited warranty.....................................28
Copyright © 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
For complete instructions, please refer to the manual provided with
your E5640, E5643B, E5644B or E5655 telephone. If your manual for
the above models has been misplaced, you may download it from
www.telephones.att.com.
Quick reference guide
1
Feature menu
>DIRECTORY
CALL LOG
Menu
Feature Menu
Directory
Call log
Ringer volume
Ringer tone
Key tone
Language
Clear voice mail
Dial type
Press ^CID or DIRVto
scroll through menu items.
Press SELECT/MENU to select
or modify a highlighted item.
Press OFF/CLEAR to cancel
an operation, back up to the
previous menu, or exit the
menu display.
>shows highlighted item
OFF/CLEAR
During a call, press to hang up.
While using menus, press to cancel
an operation, back up to the previous
menu, or exit the menu display.
REDIAL/PAUSE
Press to view redial memory.
While entering numbers, press and hold
to insert a dialing pause.
^CID
Press to scroll up in menus.
Press when phone is not in use to
display caller ID information. While
entering names or numbers, press to
move the cursor to the left.
SPEAKER
Press to activate handset speakerphone.
Press again to resume normal handset
use (earpiece).
DIRV
Press to scroll down in menus.
Press when phone is not in use to
display directory entries. While entering
names, press to advance cursor.
PHONE/FLASH
Press to make or answer a call.
During a call, press to receive an
incoming call, if call waiting is activated.
MUTE/DELETE
While on a call, press to mute
microphone. While reviewing the call log,
press to delete an individual entry or
press and hold to clear the caller ID log.
While pre-dialing, press to delete digits
from a string.
INTERCOM
Press to initiate an intercom
conversation or transfer a call.
Handset SELECT/MENU
Press to display menu, or to select
highlighted item from menu.
Before you begin
This cordless telephone
operates within the
maximum power
allowed by the Federal
Communications
Commission (FCC). Even so,
this handset and telephone
base can communicate
over only a certain distance
— which can vary with
the locations of the
telephone base and handset,
the weather, and the
construction of your home
or office.
If there is a call while
the handset is out of
range, the handset might
not ring — or if it does ring,
the call might not connect
when you press PHONE/
FLASH. Move closer to the
telephone base, then press
PHONE/FLASH to answer
the call.
If the handset is out
of range during a
telephone conversation,
there might be interference.
To improve reception, move
closer to the base.
If you move out of range
without pressing
OFF/CLEAR, your telephone
will be disconnected after
five seconds.To hang
up properly, walk back
toward the telephone base,
periodically pressing
OFF/CLEAR until the call is
disconnected.
Parts checklist
Remember to save your sales receipt and original packaging
in case it is necessary to ship your telephone for warranty
service. Check to make sure the telephone package includes the
following:
CHARGING
Handset charger
Handset
Power
adapter
Belt clip
Battery
2
Battery compartment
cover
3
Battery & charger installation
After installation, place the handset in the handset charger or the
telephone base and allow the battery to charge for at least 16 hours
before use. You can keep the battery charged by returning the
handset to the handset charger or the telephone base after each use.
When battery power is completely depleted, a full recharge takes
about 16 hours. The average talk time on a completely charged
battery is about eight hours depending on the environmental
conditions, and the standby time is approximately four days.
CHARGER light remains
on while battery is charging.
Plug the power cord into the jack on
the underside of the handset charger,
then plug the power adapter into an
electrical outlet not controlled by a
wall switch.
Align the two holes in the
connector with the socket
pins according to the
diagram inside the battery
compartment, then snap
the connector into place.
Low battery indicator
Return handset to the handset
charger or the telephone base to
recharge when this symbol flashes.
(The handset will beep when battery
is low.)
Caution: Use only the supplied
rechargeable battery or AT&T
replacement battery model
27910 (SKU 00102. Part number
89-0099-00-00).
Press tab and slide the
cover away from the center
of the telephone to open
battery compartment.
LOW BATTERY
NOTE: Use only the power adapter
supplied with this product. If you need
a replacement, call 1 (800) 222-3111.
Be sure to use an electrical outlet not
controlled by a wall switch.
Replace the compartment
cover by sliding it towards
the center of the handset
until it is securely in place.
Place the battery
and wires in the
compartment.
Adding new handsets
4
HANDSET 2
Before using a new E560-2/E560-5 handset, you
must register it with the E5640/E5643B/E5655
telephone base. During registration, you must
enter the 15-digit ID number of the telephone
base. The base ID of the E5640/E5643B is
located on the bottom of the telephone base.
For the E5655, you can find the base ID code
in the E5655 base menu. Press SELECT/MENU
just below the screen on the telephone base,
then press ^CID twice and the screen shows
>DISPLAY BASE ID. Press SELECT/MENU
and the base ID code will be displayed on the
screen.
The handset provided with your E5640/E5655 is automatically
registered as Handset 1. Additional handsets will be assigned
numbers in the order they are registered (Handset 2, Handset 3,
or Handset 4). A maximum of 4 handsets can be registered to
the same telephone base.
The E5643B has 3 handsets automatically registered as handset
1, 2 and 3. You can register one additional handset, which will be
called Handset 4.
Enter base ID, then press SELECT.
ENTER BASE ID
NOTE: A maximum of two handsets or one handset and the
speakerphone on the telephone base can be connected to an
external line anytime.
Adding new handsets
To add a new handset:
• Make sure the handset battery is properly installed and fully
charged.
• If the battery in the handset is not sufficiently charged, the
screen on the handset will show
If this happens, return the handset to the handset charger until
the screen shows
• Enter the 15-digit base ID number. The number is located on
the bottom of the E5640 and E5643B telephone base. To find
the number on the E5655, press SELECT on the telephone
base, and scroll down to highlight DISPLAY BASE ID, then
press SELECT/MENU.
• When the base ID is being entered, the following keys can be
used:
• DELETE to delete the last digit entered.
• Press and hold DELETE to delete all digits entered.
• Press SELECT when the complete base ID has been
entered.
5
ENTER BASE ID
PLACE IN CHARGER
Adding new handsets
• If the number is not entered correctly, the screen will be blank
for a few seconds and
will be displayed again until a valid base ID has been entered.
• After entering the code, press SELECT/MENU to accept the
code to complete the registration process.
NOTE: In some cases, the last digit of the base ID may be an *. Treat that as part of the base ID
and enter it into the handset for registration purpose.
NOTE: If an invalid base ID code is entered, there will be an error tone and the handset will
continue to display ENTER BASE ID. To make corrections while entering the code, erase digits by
pressing the DELETE/MENU key.
When a valid base ID has been entered and recognized by the
telephone base, the screen will be blank for a few seconds and
will show:
followed by a screen indicating the number for the newly
registered handset.
The new handset will be assigned the next available handset
number (Handset 2, Handset 3, or Handset 4).A maximum of
four handsets can be registered to each telephone base.
HANDSET X
SEARCHING...
ENTER BASE ID
6
Andere Handbücher für E5640
4
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere AT&T Mobilteil Handbücher
AT&T
AT&T CL80100 Bedienungsanleitung
AT&T
AT&T E560-1 Bedienungsanleitung
AT&T
AT&T BL102-0 Bedienungsanleitung
AT&T
AT&T SL80108 Bedienungsanleitung
AT&T
AT&T MS2025 Bedienungsanleitung
AT&T
AT&T EP590-2 - AT&T 5.8 GHz Expansion Handset Bedienungsanleitung
AT&T
AT&T 5865 Bedienungsanleitung
AT&T
AT&T TL90070 Bedienungsanleitung
AT&T
AT&T TL90073 Bedienungsanleitung
AT&T
AT&T 2402 Bedienungsanleitung
AT&T
AT&T CLP99003 Bedienungsanleitung
AT&T
AT&T TL90071 Bedienungsanleitung
AT&T
AT&T TL76008 Bedienungsanleitung
AT&T
AT&T E2662B Bedienungsanleitung
AT&T
AT&T TL86009 Bedienungsanleitung
AT&T
AT&T CL80111 Bedienungsanleitung
AT&T
AT&T BL103-0K Bedienungsanleitung
AT&T
AT&T E580-1 Bedienungsanleitung
AT&T
AT&T TL71108 Bedienungsanleitung
AT&T
AT&T EP562 Bedienungsanleitung
