AT&T Call Display 436 Bedienungsanleitung

The other party is blocking name information.

The other party is blocking number information.

The other party is blocking both name and

number information.

Your phone company is unable to receive the

other party’s name information.

Your phone company is unable to receive the

other party’s number information.

Your phone company is unable to receive the

other party’s name and number information.

An extension phone on this line is being used,

so call information cannot be received.

Display Messages

Screen Display: When:

PRIVATE NAME

PPP

PRIVATE CALLER

UNKNOWN NAME

UUU

UNKNOWN CALLER

EXTENSION USED

1USER’S MANUAL

Part 2

Revised 8/25/00

Call Display 436

Fold open this manual for

information about this product’s

installation and operation. Please

also read Part 1 – Important

Product Information.

Para recibir este manual en español, por favor llame al 1 800 222-3111.

AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.

Printed in ?. xxxxxxxxx Issue 1AT&T 9/00

F.P.O.

NEED 436 MODEL

Table/Desk Installation

1 Connect the line cord.

Plug one end of the line cord (supplied) into the unit’s TEL LINE jack.

Plug the other end of this cord into the modular wall jack,making sure it

snaps firmly into place. (If you are connecting an answering machine,

make sure it is connected between the unit and the telephone.)

2 Connect the power cord.

Plug one end of the power cord into the back of the unit. Plug the

other end into a 110V electrical outlet not controlled by a wall switch.

3 Connect the unit to the telephone (optional).

Unplug the telephone’s line cord from the wall jack and plug it into

the unit’s TEL SET jack.

4 Connect the base as shown.

5 See “Installation Settings.”

Base Installation For Table/Desk

F.P.O.

NEED 436 MODEL

NOTE: Use with a telephone is optional. However, if you do not connect a

telephone, you will not be able to use the Display Dial feature (described later

in this manual). If this unit is connected to an answering system, and if you

subscribe to Call Waiting, the Call Waiting signal may cut off some messages.

Installation With Answering System

Table/Desk Installation

Standard

Electrical

Outlet

Telephone

Modular

Wall Jack

Caller ID Unit

Answering

System

Telephone Modular

Wall Jack

Caller ID Unit

Standard

Electrical

Outlet

F.P.O.

NEED 436 MODEL

F.P.O.

NEED 436 MODEL

Wall Installation

1 Remove the bracket by sliding it downward from the unit.

2 Hold the flat edge of the bracket against the wall with the

rubber feet towards the bottom of the unit. Mark the location of

the two mounting screw holes with a pencil.

3 Thread the power cord through the square hole at the bottom

center of the bracket.

4 Hold the bracket against the wall with the power cord and the

two telephone cords routed through the channel on the back

top center of the bracket (use only one line cord if you’re not

connecting a phone). Only the telephone line cord(s) should be routed

through the bottom of the bracket channel. Using the appropriate wall

screw for your wall type, screw the bracket into the wall.

Power Cord

Telephone

Line Cords

Telephone

Line Cords

F.P.O.

NEED 436 MODEL

Wall Installation

(continued from page 3)

5 Snap the unit onto the bracket and slide it down as far as

it will go.

6 Plug the power cord into the back of the unit.

7 Plug one telephone line cord into the TEL SET jack and one line

cord into the TEL LINE jack. Pull the excess cord to the bottom of

the set.

8 Connect the other end of the cord connected to the TEL LINE

jack to a modular wall jack.

9 Connect the other end of the cord connected to the TEL SET

jack to a telephone (optional).

10 If you’re connecting the unit to an anwering system, make sure

the answering system is connected between the unit and the

telephone.

11 Plug the power cord into an electrical outlet not controlled by

a wall switch.

12 See “Installation Settings.”

Installation Settings

Language Selection

You can select ENGLISH or ESPANOL (Spanish) as the language in which

your Caller ID information is displayed. When you first plug in the power

cord,the screen displays WHICH LANGAUGE?.

1Press +until the screen displays your language selection.

2Press N. You will see the Home Area Code setup screen.

Set Home Area Code

You’ll need to program your area code, so your phone can properly

recognize and dial calls.

1 Press Nuntil the screen displays:

HAC-___

HOME AREA CODE?

2 Press +until the screen displays the first digit of your area code.

3 Press D.

4 Repeat Steps 2 and 3for the second and third digits of your area code.

5 Press N.

If for calls within You dial Enter in Step 2

your area code 7 digits Your home area code

(phone number, no area code)

10 digits 000

(area code + phone number)

— OR —

11 digits

(1+ area code + phone number)

Dial number displayed

on screen

Remove a call from

call history

Customize features

Position of call

in call history

Indicates

unreviewed call

information

Time call was received

Scroll through

Call List and

select options

Access Call

Waiting

Flashes if you have

unreviewed call

information

Indicates AM or PM

Caller’s name

Caller’s

telephone

number

Date call was

received

Message Waiting

Installation Settings

Set Local Area Code

Buttons and Screen Indicators

If for You dial Enter in Step 2

All calls outside 11 digits No Local Area Codes

your area code (1+ area code + phone number)

Some calls outside 10 digits Area codes that do

your area code (area code + phone number) not require a "1"

If you dial 10 digits (area code plus phone number) for calls within your own area

code, include your area code as a Local Area Code.

1 Press and release Nuntil the screen diplays:

LAC1-___

LOCL AREA CODE?

2 Press +until the screen displays the first digit of your area code.

3 Press D.

4 Repeat Steps 2 and 3for the second and third digits of your area code.

5 Press Dto program another Local Area Code, then follow

Steps 2 through 5

— or —

Press Nto save and exit.

In addition to making a Language Selection, and setting Home and Local

Area Codes, you can customize other operations of the Caller ID now or

later (see“Choosing Display Options”).

F.P.O.

NEED 436 MODEL

About Caller Identification (Caller ID)

This product has a Caller ID with Call Waiting feature that works with

service from your local phone service provider.

Caller ID with Call Waiting lets you see who’s calling before you answer

the phone, even when you’re on another call.

You may need to change your phone service to use this feature. Contact

your phone service provider if:

• You have both Caller ID and Call Waiting, but as separate services

(you may need combined service)

• You have only Caller ID service, or only Call Waiting service

• You don’t subscribe to any Caller ID or Call Waiting services.

You can use this product with regular Caller ID service, and you can use

this product’s other features without subscribing to either Caller ID or

combined Caller ID with Call Waiting service.

There are fees for Caller ID services, and they may not be available in all

areas.

This product can provide information only if both you and the caller are in

areas offering Caller ID service, and if both telephone companies use

compatible equipment.

About Call History

This phone assigns each incoming call a number from 1 to 90. The most

recent call will have the highest number. When the memory is full, the

oldest call information is deleted to make room for new incoming call

information.

If you answer a call before call information appears on the screen, it will

not be in the call history.

Operation

Reviewing Call History

The screen displays the call information for about 30 seconds after it has

been received.

1To review earlier calls, press -.

2To advance through call history from an earlier call, press +. The

screen displays END OF LIST to indicate you have reviewed all the

calls in the call history. When you reach the end of the call history,

it begins again.

Removing Call Records from History

When the unit is idle, press rto erase a displayed call record. The

screen displays Call Remo ed. To remove all calls from call history, press

rwhen no call is displayed. The screen displays REMOVE All?.

Press ragain.

NOTE: Once a call is removed from call history, it cannot be retrieved.

Call Waiting

Press Con the unit when you receive a call waiting signal.

Using this button puts your current call on “hold,” connects you to the

new call, and displays the name/number of the call waiting call on the

bottom two lines.

Press Cagain to return to the first call. Use Cinstead of

using the switchhook or Flash button on your phone.

Operation

Display Dial

As you review calls in history, you can dial a displayed phone number.

(This feature works only with touch tone service on a phone connected

to the unit.) Lift the handset of the phone (the screen displays the first

number in the call history), then press and release Dto call that

number, or press +or -to scroll to another number in the call history.

After you press D, the screen shows the number being called.

If the screen displays Call ID Error, an error is preventing use of the

Display Dial feature.

Display Dial Options

Use this feature if you want to check and/or change the way a number in

call history is dialed.

1Press +or -to locate the number you want to call.

2Press Dto make the call

—OR —

Press Nto see choices of how the number can be dialed (without

“1” or the area code, with “1” but no area code, with an area code but

no“1,”or with “1” followed by the area code).

The displayed number is the currently selected method. Use +or -

if you need to select another choice, then press Dto make

the call.

Inhaltsverzeichnis

Andere AT&T Telefonzubehör Handbücher

Beliebte Telefonzubehör Handbücher anderer Marken

BT DIVERSE 5400 Bedienungsanleitung

Tadiran Telecom

Tadiran Telecom EMERALD ICE Bedienungsanleitung

Musicam

Musicam FieldFone II Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Technisches Datenblatt

TIPTEL

TIPTEL DECT Set 50 Bedienungsanleitung

Panasonic

Panasonic KX-UDS124 Bedienungsanleitung

BT BT7600 Technisches Datenblatt

View

View VP-PC Bedienungsanleitung

Baldwin Boxall

Baldwin Boxall BT8 Bedienungsanleitung

SMC Networks

SMC Networks SMCDPCR-AP Bedienungsanleitung

SkyLink

SkyLink SD-001 Bedienungsanleitung

Nera

Nera ISDN Bedienungsanleitung

MCheeta

MCheeta CT-CID803 Plus Bedienungsanleitung

YASKAWA

YASKAWA YRC1000 Bedienungsanleitung

Intellitouch

Intellitouch MOH-500E Bedienungsanleitung

Viking

Viking SQRG-12 Gebrauchsanweisung

Clarity

Clarity CE225 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beocom 1401 Bedienungsanleitung