Atari VCS Montageanleitung

• Atari VCS Video Computer System

• Power supply

• Power cord

• HDMI cable

Atari VCS bundles may also include an Atari Wireless Modern Controller and/or an Atari

Wireless Classic Joystick. You may also use third-party controllers that are Xbox or PC

compatible, as well as a keyboard and mouse.

In order to set-up the Atari VCS for the first time we recommend using a compatible

controller.

• Atari VCS Video Computer System Manual

Place your Atari VCS on a flat, stable surface that is well-ventilated, relatively cool, and

away from direct heat sources. Don't put other objects on top of the Atari VCS. Do not

place the Atari VCS on top of something that generates heat. And avoid putting anything

directly behind the vents at the back corners of the Atari VCS. The Atari VCS is designed to

be displayed openly and device performance will also benefit from placement in a well-

ventilated location.

The Atari VCS video computer system includes one HDMI cable. Use this cable to connect

the system to an HDMI-compatible TV, HDTV, or monitor.

1. Find the HDMI port on the back of the console. The HDMI port is labeled.

2. Connect the HDMI cable to the HDMI port on the Atari VCS.

3. Connect the other end of the HDMI cable to the HDMI input on your TV. The HDMI

cable carries both audio and video to your TV.

The Atari VCS requires an Internet connection. You can connect your Atari VCS to your

wireless router or modem. If you want to connect wirelessly, skip this step. You will be

prompted to connect to a wireless network later.

For a wired connection, use an Ethernet cable to connect your router or modem to the

ethernet port in the back of the Atari VCS. The ethernet port is labeled.

The Atari VCS requires power to operate. To connect the Atari VCS to power:

1. Plug the power cord into the power supply.

2. Plug the power supply into the AC power port at the right rear of the Atari VCS. The

AC Power Port is labeled.

3. Plug the other end of the power cord into an electrical outlet.

Press and hold the power button on the rear left of the Atari VCS until the Atari Fuji logo on

the right of the front panel is illuminated.

Once you power on your Atari VCS, on-screen instructions will walk you through connecting

a controller, connecting to a wireless network, and creating an account.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject

to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme

aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions

suivantes:

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

• Atari VCS Wireless Classic Joystick

• USB Play/Charge Cable

• Atari VCS Wireless Classic Joystick User Manual

• Bluetooth wireless

• Rechargable

• PC/Mobile compatible

• Rumble

1. Connect your Atari VCS Wireless Classic Joystick to the Atari VCS using the USB

Play/Charge cable.

2. Power on your Atari VCS.

3. When the Atari VCS recognizes the joystick, it will display a message on the screen.

1. Power on your Atari VCS.

2. Wait for the Atari logo animation to finish playing.

3. You will see a flashing blue icon on the screen to indicate that the VCS is seeking a

connection.

4. Press and Hold the Atari Fuji logo button on the joystick until the Fuji flashes quickly

indicating it is pairing, after a few seconds you will see a message on your monitor

that the Atari VCS has recognized and connected to the joystick.

Once a joystick is paired, it will auto-connect when next powered on by simply pressing the

Atari Fuji logo button. The fuji will flash slowly, and after a few seconds you will see a

message at the top of the Atari VCS screen indicating the joystick is connected. The

battery will need to be recharged occasionally by plugging into the USB.

1. The Atari Fuji logo button in the top right of the controller:

◦Flashing quickly on and off = attempting to pair via Bluetooth

◦Flashing slowly on and off = attempting to reconnect via Bluetooth

◦Steady glow = powered on

2. The ring of LED lights around the joystick will glow when the controller is powered on.

When first powered on, these lights will also indicate the battery charge level.

◦0% to 25% of LED ring = 0 to 25% battery life

◦26% to 50% of LED ring = 26 to 50% battery life

◦51% to 75% of LED ring = 51 to 75% battery life

◦76% to 100% of LED ring = 76 to 100% battery life

3. During gameplay the LED lights will glow brighter as the joystick is pushed or rotated

to indicate direction. Game developers are able to add their own effects to activate

the LED ring during gameplay.

To charge the controller, connect your Atari VCS Wireless Classic Joystick to the Atari VCS

using the USB Play/Charge cable. Plug the male mini-USB connector into the controller,

and plug the male USB connector into any available USB port on the Atari VCS. You can

also charge the controller via the USB port on a computer, and most standard USB wall

chargers.

The Atari VCS Wireless Classic Joystick is designed to work with the Atari VCS, but is also

compatible with most PCs and Xbox consoles.

Q1. My Wireless Classic Joystick is not pairing.

A1. Confirm that the joystick is charged by pressing the Atari Fuji logo button, if the button

does not glow, you must connect charge the battery using the USB Play/Charge cable.

A2. Confirm you are following the pairing process listed above.

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these

instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or

eye strain:

• Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don’t think

you need it. Parents should monitor their children for appropriate play.

• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel

symptoms such as tingling, numbness, burning or stiffness, stop and rest for several

hours before playing again.

• If you continue to have any of the above symptoms or other discomfort during or

after play, stop playing and see a doctor.