ATEN AS-411P Bedienungsanleitung
AS/2
AUTO SWITCH
AS-411
P / AS-81
1P / AS-411S / AS-811S
User’s Manual
0
Copyright 1990 ATENB International CO., LTD.
Manual part NO. PAPE-0092-200
NOTICE
This manual is written for the Auto Switch products of AS-41 1 P/41 1 S and
AS-81
1P/811S.
Most of the operations of these models are the some, and
differences will be specified. The last character ‘P’ and ‘S’ of each model’s string
means the parallel interface and the serial interface respectively.
In this manual, ‘AS/2’ is used to represent all the models of AS-41 1
P/
AS-41 1 S and AS-81 1 P/81 1 S. When you purchase this product it should contain
the following items.
PACKAGE CHECKLIST
l
An AS/P(any one of AS-41 1 P/AS-41 1
S/AS-81
1
P/AS-81 1 S)
l The Power Adapter
spec.
depends on the following product model,
the power adapter supports AS-81 1 P model only.
Model Spec.
AS-411P
1
NONE
-
l
An
AS/2
Auto Switch User’s Manual
QUICK LOOK INTERFACE TABLE
I
POWER ADAPTER
1
BUFFER CARD
MODEL
1
INPUT PORT OUTPUT PORT SUPPORTED SUPPORTED
1
--
~~~~
4 CENTRONICS Female
1
CENTRONICS Female No/yes* Yes
8 CENTRONICS Female
1
CENTRONICS Female Yes Yes
1 RS-232C(DTE) Male
NO NO
8
RS232C(DCE) Female
1
RS-232C(DTE) Male
NO NO
*The adapter comes with buffer card.
AS/2 is a trademark of
ATEN
International Co., Ltd. IBM PC, PC/XT and
PC/AT are trademarks of International Business Machines Corporation.
TABLE OF CONTENTS
FUNCTION OVERVIEW
l-l Introduction ....................................................................................
1
l-2 Function Specifications ................................................................
4
1-3 Product Limitation ..........................................................................
6
INSTALLATION
2-l
Installation Procedure
...................................................................
7
2-2
DIP Switch Setting .......................................................................
11
2-3
As Buffer Card Installation
............................................................
13
POWER ON PROCEDURE
3-l
Power On Procedure
.................................................................
15
3-2
Auto Switching Mode ..................................................................
15
3-3
Manual Switching Mode ...............................................................
16
APPENDIX A Trouble Shooting .............................................................
17
APPENDIX B Centronics Interface Timing Chart
.................................
18
APPENDIX C Preventing Radio &TV Interference
..............................
19
AS/2
Auto Switch
FUNCTION OVERVIEW
1 FUNCTION OVERVIEW
l-1 INTRODUCTION
The AS/2 is a high performance and low cost printer sharing device
which operates in either auto switching mode or manual switching mode. The
AS/2 allows
up to
four or eight source devices to share one common destination
devices. In the auto switching mode the AS/2 automatically locks on and
services the source device that requests to link with the common device.
However, in the manual switching mode the AS/2 works exactly the same way
as the
conventional
data switch.
There are four models, AS-41
1
P, AS-41
1S
AS-81 1 P and AS-81 1 S all
belong to the AS/2 auto switch products. These differences can be quickly
understood by reading the following table.
AS-81 1 P
AS-41 1S
AS-811s
8CENTRONICSFemale
4
RS-232C(DCE)
Female
8RS-232C(DCE)Female
1
CENTRONICSFemale
1 RS232C(DTE) Male
1
RS-232C(DTE)
Male
The AS/2 tremendously improves the efficiency of your switching
applications. We suggest that you take a few moments to carefully read the
following instructions to ensure the maximum benefits and convenience your
AS/2 offers. The following figures are the AS/2's front views and rear views.
User’s Manual
1
FUNCTION OVERVIEW AS/2
Auto Switch
1-2 FUNCTION SPECIFICATIONS
PARALLEL MODEL
FUNCTIONS
I
AS-41 1 P
I
AS-81 1 P
Power Supply
/
DC
9V,
100mA*
/
DC
9V,
100mA
.
.
-
Cable Length
II
6M
CONNECTOR INPUT
4
CENTRONICS
8
CENTRONICS
(DB-25)Female OUTPUT
1
CENTRONICS
1
CENTRONICS
Input Status
4
8
LED Printer Ready
11
Manual
1
1
Buffer Care (Extended) 256K/1
M/2M
Bytes
Input Arbitration
Function Key
Input Port Selection
Time out Selection
Auto From Feed
First Come, First Serve
Manual Select
Auto or Manual
5
-
60 sec.
Enabled/Disabled
Ooeration Temp.
1
Dimensions
1224xl54x615mm
/205x97x230mn
*The adaptor comes with buffer card.
Fig. 1-2-l AS-41 1 P/AS-81 1 P’s Function Specifications
4
User’s Manual
AS/2
Auto Switch
FUNCTION OVERVIEW
SERIAL MODEL
FUNCTIONS
AS-41 1 S AS-81 1 s
Power Supply
AC
9V,
300mA (spare)
Cable Length
15M
CONNECTOR
INPUT (Female) 4 RS-232C (DCE) 8 RS-232C (DCE)
(DB-25)
OUTPUT (Male) 1 RS-232C (DTE) 1 RS-232C (DTE)
1
Input Status
I
4
I
8
LED
Power
Manual
Input Arbitration
1
1
11
First Come, First Serve
Function Key
Manual Select
input Port Selection Auto or Manual
Time out Selection
Operation Temp.
Stock
Temp
Humidity
10-90 sec.
5°C
-
40°C
-20°c
-
60°c
I
0%
-
80%
Enclosure
I
Metal.
Weight
Dimensions
1850g
2520g
224 x 154 x
615mm
205 x 97 x 230mr
Fig. 1-2-l
AS-41 1 S/AS-81 1 S’s Function Specifications
User’s Manual
5
FUNCTION OVERVIEW AS/2
Auto Switch
1-3 PRODUCT LIMITATION
AS/2 is a well designed quality product. Its maximum performance and
limitation is described as follows.
‘Hardware’ Handshaking, Xon-Xofl
l
AS/2's
Manual Switching Mode is
shaking Modes.
l
AS/2's
Auto Switching Mode is only suitable for devices which use
f
Handshaking is not allowed.
suitable for all kinds of
Hand-
l
For models of AS-41
1
P and AS-81
no more than 6 meters. 1 P, the cable length is limited to
l
, For models of AS-41 1 S and AS-81 1 S, the cable length is limited to
no more than 15 meters.
l The Input Ports and the Output Ports are constantly configured to
be DTE or DCE that are shown in section l-2 Function Specificat-
ions. Make sure you are using the right cable to connect your PC
or devices to AS/2.
NOTE: DTE means Data Terminal Equipment.
DCE means Data Communications Equipment.
The Serial Interface and Parallel Interface mentioned in this manual
are RS-232C and Centronics respectively (please refer to Appendix
B).
AS/2 is IBM PC/AT/XT compatible.
6
User’s Manual
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere ATEN Schalten Handbücher
ATEN
ATEN Petite CS682 Bedienungsanleitung
ATEN
ATEN ALTUSEN KM0832 Bedienungsanleitung
ATEN
ATEN VM7814 Bedienungsanleitung
ATEN
ATEN Master View CS-1708 Bedienungsanleitung
ATEN
ATEN CL5708I Bedienungsanleitung
ATEN
ATEN Slideaway CL1008 Bedienungsanleitung
ATEN
ATEN VS0801HB Bedienungsanleitung
ATEN
ATEN ALTUSEN KH2508 Bedienungsanleitung
ATEN
ATEN CS-228 Bedienungsanleitung
ATEN
ATEN KN1000A Bedienungsanleitung
ATEN
ATEN ALTUSEN KH2508a Bedienungsanleitung
ATEN
ATEN Master View CS-1762 Bedienungsanleitung
ATEN
ATEN US-221 Bedienungsanleitung
ATEN
ATEN CS1148H-AT-U Bedienungsanleitung
ATEN
ATEN CS-64U Bedienungsanleitung
ATEN
ATEN VS0801 Bedienungsanleitung
ATEN
ATEN Master View CS-82A Bedienungsanleitung
ATEN
ATEN Master View CS-9134 Bedienungsanleitung
ATEN
ATEN CS176A Bedienungsanleitung
ATEN
ATEN VS0801H Bedienungsanleitung
