ATEN CS782DP-AT Bedienungsanleitung
CS782DP
USER MANUAL
2-Port USB DisplayPort KVM Switch
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Warning: Operation of this equipment in a residential environment could cause
radio interference.
Achtung: Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen verur-
sachen.
KCC Statement
RoHS
This product is RoHS compliant.
- 3 -
CS782DP User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://eservice.aten.com
For North American technical support:
International
http://eservice.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
1-949-428-1111
Email Support [email protected]
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4998
- 4 -
Package Contents
The CS782DP 2-Port USB DisplayPort KVM Switch package
contains the following items:
1 CS782DP 2-Port USB DisplayPort KVM Switch
2 DisplayPort Cables
2 USB Cables
2 Audio Cables
1 Remote Port Selector
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
*Features may have been added to the CS782DP since this
manual was printed. Please visit our website to download the
most up-to-date version of the manual.
Copyright © 2020 ATEN
®
International Co., Ltd.
Manual Date: 2020-11-05 - Manual Part No. PAPE-1375-AT5G
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Overview
The CS782DP takes a giant step forward from prior digital-
interfaced KVM models by offering DisplayPort functionality, USB
2.0 peripheral sharing (via a USB hub attached to the USB
mouse port), a rich bass experience for 2.1 surround systems
and a firmware upgrade function that allows you to keep up with
latest available versions.
Supporting the latest DisplayPort technology, for premium image
quality and vivid high-definition sound for music, movies and
games.
Another new feature of the CS782DP is the implementation of a
remote port selector. This means that you can now control port
switching from the desktop while the switch itself can be placed
in a convenient, out-of-the-way location. Also, in addition to new
hotkeys, the CS782DP offers the latest mouse port-switching
function – simply double-click on the scroll wheel of a USB mouse
to change ports.
Finally, the CS782DP's new Power on detection feature means
that if one of the computers is powered off, the CS782DP will
automatically switch to the other computer if powered-on.
Featuring an unbeatable combination of DisplayPort functionality,
USB 2.0 peripheral sharing convenience and enhanced user-
friendly operations, the CS782DP allows users to keep ahead of
the latest innovations in desktop multimedia and productivity.
- 6 -
Features
One DisplayPort video console controls two USB computers
DisplayPort 1.2 compliant, HDCP compliant
Computer selection via remote port selector, hotkeys, and
USB mouse
1
Multiplatform support – Windows, Mac, Sun, Linux
Supports MST (Multi-Stream Transport)
2
, enabling multiple
monitors to be used via a single DisplayPort connector
Compatible with widescreen LCD monitors
Power on detection – if either of the computers is powered
off, the CS782DP will automatically switch to the other
computer
Audio-enabled – full bass response provides a rich
experience for 2.1 channel surround sound systems
Supports HD Audio
3
through DisplayPort playback
Independent switching of the KVM and Audio focus
3
allows
convenient multi-tasking
Supports multimedia keyboards
Supports wireless keyboards and mice
Console mouse port emulation/bypass feature supports most
mouse drivers and multifunction mice
Mac/Sun keyboard support and emulation
4
USB 2.0 mouse port can be used for USB hub and USB
peripheral sharing
5
Bus-Powered
Firmware upgradable
- 7 -
Note: 1. Mouse port switching is only supported under mouse
emulation mode and by USB 3-key wheel mice.
2. MST (Multi-Stream Transport) requires either monitors
capable of DisplayPort 1.2 daisy-chaining, or use of a
powered DisplayPort MST Hub. A DisplayPort v1.1a
display can be the last display in a DisplayPort v1.2
chain. The PC source must be DisplayPort 1.2
compliant.
3. HD audio through DisplayPort cannot be switched
independently.
4. 1. PC keyboard combinations emulate Mac/Sun
keyboards. 2. Mac/Sun keyboards work only with their
own computers.
5. This feature may require an extra power adapter to be
connected to the USB hub and that the CS782DP’s
Mouse Emulation Mode be disabled.
- 8 -
System Requirements
Console
A DisplayPort monitor capable of the highest resolution that you will
be using on any computer in the installation
A USB Keyboard and a USB Mouse
Speakers (optional)
Computers
The following equipment must be installed on each computer that is to be
connected to the system:
A DisplayPort video port
USB Type A port
Speaker port (optional)
Cables
Two DisplayPort cables, two USB 2.0 cables and two 3.5mm Audio Jack
cables included with the CS782DP package
Operating Systems
Supported operating systems are shown in the table, below:
OS Version
Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10
Linux RedHat 6.0 and higher
SuSE 8.2 and higher
Mandriva (Mandrake) 9.0 and higher
UNIX AIX 4.3 and higher
FreeBSD 3.51 and higher
Sun Solaris 9 and higher
Novell Netware 5.0 and higher
Mac OS 9 and higher
DOS 6.2 and higher
- 9 -
Components
CS782DP
No. Component Description
1 Console Audio Port Your console speakers plug in here.
2 Console Monitor Port Your console DisplayPort monitor plugs in here.
3 Console Keyboard Port Your console USB keyboard plugs in here.
4 Console Mouse Port Your console USB mouse plugs in here.
5 Remote Port Selector
Jack
The Remote Port Selector plugs in here.
6 Port LEDs The Port LEDs indicate status.
The LED lights on to indicate that the computer attached
to the corresponding port is selected and has the KVM
focus.
The LED flashes to indicate that the computer attached to
its corresponding port is being scanned by the Auto Scan
function.
The LED is off to indicate the port is not selected.
7 Computer Monitor Port Your computer DisplayPort output plugs in here.
8 Computer Audio Ports Your computer audio output plugs in here.
9 Computer USB Keyboard
/ Mouse Port
Your computer USB cable plugs in here.
10 Port Selection Pushbutton Press the Port Selection Pushbutton to toggle the KVM
and Audio focus between the two computers.
6
PC2 PC1
879
Computer Port 2
978
Computer Port 1
10
5 2 4
3
1
Console Port
- 10 -
Installation
1. Plug your keyboard and mouse into the console Keyboard/
Mouse ports located on the front side of the CS782DP. The
ports are labeled with icons with the mouse port on the top
and the keyboard port on the bottom.
Note: The console mouse connector is a USB 2.0 port and so
can accept any USB compatible peripheral. You can even
connect a hub to install multiple USB devices (this feature
may require an extra power adapter to be connected to
the USB hub and that the CS782DP’s Mouse Emulation
Mode be disabled). See Hotkey Summary Table, page 14
for information.
2. Plug your monitor into the DisplayPort port, located on the
front of the CS782DP. Power on the monitor.
3. Plug your speakers into the console audio port, located on
the front of the CS782DP (Optional).
4. Plug the USB, video and audio connectors of the KVM cables
into their respective PC ports on the CS782DP.
5. Plug the USB, video and audio connectors of the KVM cables
into their respective ports on the computers you are installing.
6. If you choose to use the remote port selector, plug its cable
into the remote port selector female jack, located on the front
of the unit.
7. Power on the computers.
1. Make sure that the power to any device that you
connect to the installation has been turned off. You
must unplug the power cords of any computers that
have the Keyboard Power On function.
2. To prevent damage to your installation from power
surges or static electricity. It is important that all
connected devices are properly grounded.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ATEN Schalten Handbücher
ATEN
ATEN ATEN MasterView KVM CS-62 Bedienungsanleitung
ATEN
ATEN Master View SlideAway ACS-1208L Bedienungsanleitung
ATEN
ATEN Master View CS-1762 Bedienungsanleitung
ATEN
ATEN ALTUSEN KH1516 Bedienungsanleitung
ATEN
ATEN CS1732B Bedienungsanleitung
ATEN
ATEN Altusen KL1116L Bedienungsanleitung
ATEN
ATEN ALTUSEN KH2508a Bedienungsanleitung
ATEN
ATEN VM3404H Bedienungsanleitung
ATEN
ATEN ALTUSEN KW1000 Bedienungsanleitung
ATEN
ATEN CS1768 Bedienungsanleitung
ATEN
ATEN VanCryst VS481A Bedienungsanleitung
ATEN
ATEN CS1642a Bedienungsanleitung
ATEN
ATEN CS-74M Bedienungsanleitung
ATEN
ATEN VS1601 Bedienungsanleitung
ATEN
ATEN CS1842 Bedienungsanleitung
ATEN
ATEN CS1782 Bedienungsanleitung
ATEN
ATEN VS481 Bedienungsanleitung
ATEN
ATEN UH-104 Bedienungsanleitung
ATEN
ATEN CS1842 Bedienungsanleitung
ATEN
ATEN ALTUSEN KH2508 Bedienungsanleitung
