ATEN Master View CS-82A Bedienungsanleitung

Andere Handbücher für Master View CS-82A

3

Inhaltsverzeichnis

Andere ATEN Schalten Handbücher

ATEN

ATEN KVMP CS1822 Bedienungsanleitung

ATEN

ATEN US-221 Bedienungsanleitung

ATEN

ATEN CN8600 Bedienungsanleitung

ATEN

ATEN CS1642a Bedienungsanleitung

ATEN

ATEN KN2100VA Bedienungsanleitung

ATEN

ATEN KN1132VB Series Bedienungsanleitung

ATEN

ATEN CubiQ CM0264 Bedienungsanleitung

ATEN

ATEN US221A Bedienungsanleitung

ATEN

ATEN CS-228 Bedienungsanleitung

ATEN

ATEN KN4164Vl Bedienungsanleitung

ATEN

ATEN AS-411P Bedienungsanleitung

ATEN

ATEN Master View CS-1754 Bedienungsanleitung

ATEN

ATEN Slideaway CL5708 Bedienungsanleitung

ATEN

ATEN KN1000A Bedienungsanleitung

ATEN

ATEN Master View CS-1708 Bedienungsanleitung

ATEN

ATEN CS 1642 Bedienungsanleitung

ATEN

ATEN KVMP CS1782A Bedienungsanleitung

ATEN

ATEN ES0152 Bedienungsanleitung

ATEN

ATEN CL5708IM Bedienungsanleitung

ATEN

ATEN CL3108 Bedienungsanleitung

ATEN

ATEN ALTUSEN KM0432 Bedienungsanleitung

ATEN

ATEN CS661 Bedienungsanleitung

ATEN

ATEN CS1922M Bedienungsanleitung

ATEN

ATEN CL3108 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

CS-82A Quick Start Guide

Installation

1. Make sure that power to all the devices you will be connecting @NUM1 = Make sure that

power to all the devices you will be connecting up have been turned off. You must unplug

the power cords of any computers that have the Keyboard Power On function. To prevent

damage to your equipment due to ground potential difference, make sure that all devices

on the installation are properly grounded.

2. Plug your keyboard, mouse, and monitor into the unit’s Console Ports.

3. Use KVM cable sets (as described in the Cables section in the User Manual), to connect

any available CPU Port to the Keyboard, Video and Mouse ports of the computer you are

installing.

Note: If your computers use AT style connectors for the keyboard, and/or standard serial

connectors for the mouse, refer back to the note in the Cables section in the User

Manual.

4. If you choose to use external power (optional) plug the power adapter into an external AC

source; plug the power adapter cable into the unit s power jack as shown in the diagram.

5. Turn on the power to the computers.

Note: The Power On default is to link to the first computer you turn on.

© Copyright 2002 ATEN®International Co., Ltd.

Manual Part No. PAPE-XXXX-XXX

Printed in Taiwan 08/2002

All brand names and trademarks are the registered property of their respective owners.

2002-08-28

Operation

Manual Port Selection

Simply press the Port Selection switch that corresponds to the port that the computer you

want to access is attached to. The Selected LED lights to indicate which port is active.

Hotkey Port Selection:

Hotkey Port Control provides KVM focus to a particular computer directly from the keyboard.

MYou can toggle between the two computers by pressing and releasing the left or right Ctrl

key twice [Ctrl]+[Ctrl].

Note: The combination must be on the same side: [Left Ctrl]+[Left Ctrl], or

[Right Ctrl]+[Right Ctrl].

MYou can automatically switch between the two computers at 5 second intervals (Auto

Scan) by pressing and releasing the Left Shift key, then pressing and releasing the Right

Shift key: [Left Shift]+[Right Shift].

Once scanning begins, it continues until you press the [Spacebar] to exit Auto Scan Mode.

While Auto Scan Mode is in effect, none of the other keyboard keys will function. You must

exit Auto Scan Mode by pressing the [Spacebar] in order to regain use of the console.

Hotkey Summary Table

Combination Action

[Left Ctrl]+[Left Ctrl], or

[Right Ctrl]+[Right Ctrl] Toggles between the two computers

[Left Shift]+[Right Shift] Invokes Auto Scan Mode

LED Display

Activity Meaning

Off Port is not selected.

On (Steady) Port is connected to an active computer.

Flashing (On and Off equal) Port is connected to an active computer and is being accessed in

Auto Scan mode.

- 2 -

2002-08-28