ATEN VanCryst VM0404H Bedienungsanleitung

VM0404H

USER MANUAL

HDMI Matrix Switch

FCC Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital service, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. Any changes or modifications

made to this equipment may void the user’s authority to operate this

equipment. This equipment generates, uses, and can radiate radio

frequency energy. If not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

- 3 -

VM0404H User Manual

Online Registration

Telephone Support

Technical Support

For international online technical support – including troubleshooting,

documentation, and software updates:

http://eservice.aten.com

For North American technical support:

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8448-158923

Email Support [email protected]

Online

Technical

Support

Troubleshooting

Documentation

Software Updates

http://www.aten-usa.com/support

Telephone Support 1-888-999-ATEN ext 4998

- 4 -

Package Contents

The VM0404H 4x4 HDMI Matrix Switch package contains the following

items:

1 VM0404H 4x4 HDMI Matrix Switch

1 IR Remote Control Unit

1 Power Adapter

1 Rack Mount Kit

1 User Instructions*

Check to make sure that all the components are present and that nothing

got damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation

procedures carefully to prevent any damage to the unit, and/or any of the

devices connected to it.

*Features may have been added to the VM0404H since this

manual was printed. Please visit our website to download the

most up-to-date version of the manual.

Manual Date: 2014-03-20

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

- 5 -

Overview

With more and more HDMI devices entering the market, the need for

simultaneous access to different HDMI sources is becoming increasingly

important. Now, the VM0404H 4x4 HDMI Matrix Switch offers an easy

and affordable way to add extra HDMI capabilities to your installation by

allowing you to switch easily between four HDMI sources and four HDMI

displays.

The VM0404H is a 4x4 HDMI Matrix Switch that provides a convenient

way to route high definition video and audio from any of four HDMI

sources to any of four HDMI displays. The VM0404H allows you to

connect four HDMI devices (such as an HD camcorder or satellite box,

HD-DVD player, hi-def Blu-ray player, home theater PC, stand-alone

streaming media player, gaming console, etc.) to four HDMI monitors,

displays, projectors or TVs at the same time. The remote control and

convenient front panel pushbuttons allow you to quickly and easily cycle

through HDMI sources and displays, while the front panel LEDs indicate

the source device for each display at a glance.

Furthermore, for complete system and install integration, RS-232 control

is standard through the VM0404H’s built-in bi-directional RS-232 serial

port that allows the switch to be controlled through a high-end controller,

PC, and/or home automation / home theater software package.

- 6 -

Features

Connects any of 4 HDMI sources to any of 4 HDMI displays

Switch between HDMI sources and displays using a remote control

or front panel pushbuttons

Superior video quality – HDTV resolutions of 480p, 720p, 1080i,

1080p (1920x1080); VGA, SVGA, SXGA, UXGA (1600x1200), and

WUXGA (1920 x 1200)

Features EDID expert technology to set up different video

configurations via different EDID modes

HDCP compatible

CEC enable/disable function provides an option of communicating

and responding to a universal remote control

HDMI (3D, Deep Color)

Supports Dolby True HD and DTS HD Master Audio

Long-distance transmission – up to 20 m (24 AWG) and 15 m (28

AWG)

Built-in bi-directional RS-232 serial remote port for high-end system

control – includes built-in comment function

Power On Detection – if one HDMI source is powered off, the

VM0404H will automatically switch to the next powered-on source

DDC compatible

Signaling rates up to 2.25 Gbits in support of 1080p display

All-metal casing

Easy and affordable way to add four HDMI inputs to your multiscreen

home theater systems

Front panel pushbutton enable/disable function for high security

applications

Note: The VM0404H AP and GUI operation instructions can be

downloaded from the ATEN website (www.aten.com).

- 7 -

System Requirements

Source Devices

HDMI Type A output connector(s)

Note: A DVI/HDMI adapter is required when connecting a DVI source

device.

Display Devices

Display devices or receivers with an HDMI Type A input connector

Cables

1 HDMI cable for each source device you will be connecting

1 HDMI cable for each display device you will be connecting

Note: 1. No cables are included in this package. We strongly

recommend that you purchase high-quality cables of

appropriate length since this will affect the quality of the audio

and video display. Contact your dealer to purchase the correct

cable sets.

2. If you wish to utilize the VM0404H’s high-end serial controller

function, you need to purchase an appropriate RS-232 cable.

See Installing the RS-232 Controller, page 11.

- 8 -

Components

VM0404H Front View

VM0404H Rear View

No. Component Function

1 Output Port

Selection

Pushbuttons

Pressing a port selection pushbutton cycles through

the four HDMI input sources (Source A, B, C, or D) to

be displayed on the display device attached to the

corresponding output port (Display 1, 2, 3, or 4).

2 Input Port LEDs The LEDs (A, B, C, and D) light to indicate that the

HDMI source attached to the corresponding input

port is routed to the display device attached to the

corresponding output port.

3 IR Receiver This receives signals from the IR remote control.

No. Component Function

1 Power Jack The power adapter cable plugs in here.

2 HDMI Out Ports The cables from your HDMI display devices plug into

these ports.

3 HDMI In Ports The cables from your HDMI source devices plug into

these ports.

4 RS-232 Serial

Port This serial remote port is for input source selection

and high-end system control.

1234

HDMI IN RS-232

13 4

HDMI IN HDMI IN HDMI IN

HDMI OUT HDMI OUT HDMI OUT HDMI OUT

34 21 DA

- 9 -

IR Remote Control

No. Component Function

1 Input Port

Selection

Buttons

Press the Port Up button to cycle forward through the

HDMI source devices (A to B; B to C; C to D; D to A).

Press the Port Down button to cycle backward

through the HDMI source devices (A to D; D to C; C

to B; B to A).

2 Output Port

Selection

Buttons

Press a button to bring the focus directly to the

display device attached to its corresponding port.

- 10 -

Installation

Installation of the VM0404H is simply a matter of plugging in the

appropriate cables. To install the switch, refer to the installation diagram

below as you perform the following steps:

1. Use HDMI cables to connect the HDMI In ports on the video display

devices to the HDMI Out ports on the rear panel of the VM0404H.

2. Use HDMI cables to connect the HDMI Out ports on the source

device(s) to the HDMI In ports on the VM0404H. Four HDMI In ports

are located on the rear panel of the switch.

3. Plug the provided power adapter into an appropriate AC power

source; plug the power adapter cable into the Power Jack on the

VM0404H.

4. (Optional) If you are using the serial control function (see page 11),

use an appropriate RS-232 serial cable to connect the computer or

serial controller to the VM0404H’s RS-232 Serial port.

5. You may now power on the display and source devices.

1. Make sure that the power to any device that you connect

to the installation has been turned off.

2. Make sure that all devices you will be installing are

properly grounded.

Hardware / Software

Controller

HDMI IN RS-232

HDMI IN HDMI IN HDMI IN

HDMI OUT HDMI OUT HDMI OUT HDMI OUT

HDMI Source Devices

HDMI Display Devices

Andere Handbücher für VanCryst VM0404H

Inhaltsverzeichnis

Andere ATEN Schalten Handbücher

ATEN

ATEN Altusen KH-0116 Bedienungsanleitung

ATEN

ATEN CubiQ CM0264 Bedienungsanleitung

ATEN

ATEN VS-291 Bedienungsanleitung

ATEN

ATEN CS1922M Bedienungsanleitung

ATEN

ATEN CL5708M Leitfaden

ATEN

ATEN Master View CS-1754 Bedienungsanleitung

ATEN

ATEN VS482 Bedienungsanleitung

ATEN

ATEN Altusen KN4116VA Bedienungsanleitung

ATEN

ATEN Altusen RCMDP101U Bedienungsanleitung

ATEN

ATEN VS481b Bedienungsanleitung

ATEN

ATEN CS176A Bedienungsanleitung

ATEN

ATEN ALTUSEN SN0108 Bedienungsanleitung

ATEN

ATEN CS1762a Bedienungsanleitung

ATEN

ATEN US3344I Bedienungsanleitung

ATEN

ATEN CS1708A Bedienungsanleitung

ATEN

ATEN FH-300 Montageanleitung

ATEN

ATEN CS782DP Bedienungsanleitung

ATEN

ATEN AS-251S Bedienungsanleitung

ATEN

ATEN VS0201 Bedienungsanleitung

ATEN

ATEN CS1798 Bedienungsanleitung

ATEN

ATEN CS-62 Bedienungsanleitung

ATEN

ATEN UC2322 Bedienungsanleitung

ATEN

ATEN US3312 Bedienungsanleitung

ATEN

ATEN CS1188H-AT-E Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung