GENERAL INFORMATION AND FEATURES
210-0197_Libretto_TX_ATI_2020-02_ATI-eng
1. SYMBOLS IN THE MANUAL
In reading this book, particular attention should be given to the parts marked with symbols represented:
DANGER!
serious danger to the life and limb
WARNING!
Possible dangerous situation for the
product and the environment
2. GENERAL WARNINGS
this instruction booklet is an integral and essential part of the appliance and must be kept with care near the
appliance for future reference. It contains important information about safety, installation, use and maintenance.
the apparatus has been built for the production of hot water: any other type of use is to be considered as
dangerous and unsuitable.
the appliance must not be installed in damp environments, to be protected from splashes, jets of water or other
liquids, to avoid anomalies to electrical and thermal devices.
installation must be performed by professionally qualified personnel responsible for complying with current
safety standards. incorrect installation, without complying with the instructions given by the manufacturer, may
cause damage to people, animals or things, for which the manufacturer assumes no responsibility.
parts of the packaging (plastic bags, polystyrene, wood, staples, etc.) must not be left within reach of children
as they are potential sources of danger.
The device can be used by children aged under 8 years old and people with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, provided under surveillance or after the companies
have received instructions to ' safe use of and understanding of the dangers inherent in it.
children should not play with the appliance.
cleaning and maintenance intended to be performed by the user must not be performed by unsupervised
children.
If the appliance should be sold or transferred to another owner, ensure that this booklet accompanies the same,
so that they can be consulted by the new owner and / or installer.
not to support any kind on the subject. to avoid risk of damage due to freezing, in the case it is planned to leave
the unit unused for a long period in an environment not heated, it is advisable to empty it completely. The
manufacturer is not liable for malfunctions or breakage of components due to frost and water leakage from the
plant.
to get the best result and the warranty terms, we recommend that you carefully follow the instructions below and
use only original spare parts and kits supplied by the manufacturer.
multiple devices in the same room for a greater overall thermal capacity to 35 kw, constitute thermal power
station and are subject to the provision of the circular n ° 68 VVFF.
You are not tamper with any device calibrated and sealed at the factory by the manufacturer.
the devices should be checked and verified regularly by a competent person according to the law of the country
where the equipment is installed.
this apparatus must be kept at suitable distance from any flammable materials
any repair of replacement components shall be performed by personnel authorized by the manufacturer.
danger hot surfaces: the device are present of the warm surfaces, in particular the area break wind hood and
burner assembly, a warning sticker and 'was put in correspondence with the high temperature surfaces. and
'absolutely it is forbidden to touch these surfaces while the appliance is in operation.
3. TRANSPORTATION, STORAGE AND RECYCLING
The apparatus
It must be transported and stored dry and protected from frost.
It must be stored, transported and used at a temperature between +10 and +40 ° C and at a humidity
between 40% and 80%.
It must not be turned upside down during transport
must not be handled and / or laid horizontally: it is only and exclusively in the vertical can carry it.
