ATIM Cloud Wireless ACW Series Bedienungsanleitung

ATIM Cloud Wireless®

Infrared Presence - PIR

User Guide

Concerned models:

ACW-PIR360-I

ACW-PIR90-I

ACW-PIR180-O

ACW-PIR90-O

ACW-ILB30

ACW-ILB100

1 
ATIM_ACW-PIR_UG_EN_V1.4 
TABLE OF CONTENTS 
Document version history .......................................................................................................................................... 2 
Disclaimer.................................................................................................................................................................. 2 
Trademarks and copyright.......................................................................................................................................... 2 
Declaration of compliance.......................................................................................................................................... 3 
Environmental recommendations............................................................................................................................... 3 
a. Explosive atmosphere 3 
b. Environment 3 
c. Radio 4 
General presentation ................................................................................................................................................. 5 
a. Optex documentations 5 
Technical features...................................................................................................................................................... 6 
a. Consumption 6 
b. Power Supply 6 
Operating modes of the PIR........................................................................................................................................ 7 
a. Counting mode 7 
b. Alarm mode 8 
First startup ............................................................................................................................................................... 9 
a. Power up 9 
b. Test frame emission 9 
Frame fromat...........................................................................................................................................................10 
a. Lists of the frames 10 
b. Standard frames 10 
c. Keep alive frame 11 
d. Downlink frames 11 
Configuration........................................................................................................................................................... 13 
a. Change of the operating mode 13 
Optional: Temperature sensor..................................................................................................................................14 
b. Commissioning of the device on the Sigfox network 15 
c. Commissioning of the device on the LoRaWAN network 17 
Troubleshooting.......................................................................................................................................................18 
Technical support..................................................................................................................................................... 18 

ATIM_ACW-PIR_UG_EN_V1.4

Document version history

Version

Date

Description

Author

Concerned

software

version

1.0

02/03/2021

Document creation

1.1

16/04/2021

Complements update

1.2

03/05/2021

Multiple corrections

1.3

19/05/2021

LoRa version bugs corrections

1.4

02/06/2021

LoRa downlinks corrections

Disclaimer

The information contained in this document is subject to change without warning and does not represent a

commitment on the part of ATIM radiocommunications. ATIM radiocommunications provides this document ‘as-is’

with no warranty of any kind, express or implied, including but not limited to implied warranties of merchantability or

fitness for a particular purpose. ATIM radiocommunications may make changes and/or improvements to this manual

or to the product(s) or program(s) described in this manual, at any time.

Trademarks and copyright

ATIM radiocommunications®, ACW ATIM Cloud Wireless® and ARM Advanced Radio Modem® are registered

trademarks of ATIM SARL in France. The other trademarks mentioned in this document are the property of their

respective owners.

ATIM_ACW-PIR_UG_EN_V1.4

Declaration of compliance

All ACW Atim Cloud Wireless® products comply with the regulatory requirements of the R&TTE Directive (1999/5/EC),

article 3:

1 SAFETY (Article 3.1a of the 1999/5/EC Directive)

NF EN60950-1 Ed. 2006/A1:2010/A11:2009/A12:2011 (health)

EN62479: 2010 (power <20mW) or EN62311:2008 (power > 20mW)

2 Electromagnetic compatibility (Article 3.1b of the 1999/5/EC Directive)

EN 301489-3 v1.4.1, EN 301489-1 V1.9.2

3 Efficient use of the radio frequency spectrum (Art.3.2 of the 1999/5/EC Directive)

ETSI EN300 220-2 v2.4.1 and EN300 220-1 v2.4.1

Environmental recommendations

a. Explosive atmosphere

Except for the ACW-ATEX line specifically intended for this purpose, do not use ACW radio modems in the presence of

flammable gases or fumes. Using the equipment in such an environment constitutes a safety hazard.

b. Environment

Respect the temperature ranges for storage and operation of all products. Failing to respect these guidelines could

disrupt device operation or damage the equipment. ACW products in IP65 water- and dust-resistant housings may be

placed outdoors but must not be submerged under any circumstances.

Follow the instructions and warnings provided below to ensure your own safety and that of the environment and to

protect your device from any potential damage.

ATIM_ACW-PIR_UG_EN_V1.4

General hazard –Failure to follow the instructions presents a risk of equipment damage.

Electrical hazard –Failure to follow the instructions presents a risk of electrocution and

physical injury.

Direct-current symbol

WARNING: do not install this equipment near any source of heat or any source of humidity.

WARNING: for your safety, it is essential that this equipment be switched off and disconnected from

mains power before carrying out any technical operation on it.

WARNING: the safe operation of this product is ensured only when it is operated in accordance with

its intended use. Maintenance may only be performed by qualified personnel.

Waste disposal by users in private households within the European Union. This symbol appears on a

product or its packaging to indicate that the product may not be discarded with another household

waste. Rather, it is your responsibility to dispose of this product by bringing it to a designated

collection point for the recycling of electrical and electronic devices. Collection and recycling waste

separately at the time you dispose of it helps to conserve natural resources and ensure a recycling

process that respects human health and the environment. For more information on the recycling

centre closest to your home, contact your closest local government office, your local waste

management service, or the business from which you purchased the product.

c. Radio

Modems in the ACW line are radio-communication modems that use the ISM (industrial, scientific, and medical) bands,

which may be used freely (at no cost and with no authorization required) for industrial, scientific, and medical

applications.

ATIM_ACW-PIR_UG_EN_V1.4

General presentation

The ACW-PIR product line deals with 6 infrared presence detectors.

⚫ACW-PIR360-I: Ceiling indoor version (360° detection radius)

⚫ACW-PIR90-I: Wall indoor version (90° detection radius)

⚫ACW-PIR180-O: Wall outdoor version (180° detection radius)

⚫ACW-PIR90-O: Wall outdoor version (90° detection radius)

⚫ACW-ILB30: Outdoor detector « barrier type » range of 30m

⚫ACW-ILB100: Outdoor detector « barrier type » range of 100m

This user guide presents the installation and configuration of the LoRa or Sigfox radio part of the products. For more

information on how to install the product or configure the infrared detection part, please refer to the Optex

documentation below,

CAUTION: On some products, it is possible via switches to configure the default states of the dry contacts (NO / NC

/ COM). To guarantee the correct functioning of the radio part, do not modify these settings.

a. Optex documentations

This documentation completes this user guide, on the configuration of infrared detectors as well as on the installation

procedure.

Product

Optex reference

Link

ACW-PIR360-I

FX 360

https://www.optex-europe.com/products/intrusion-detection/fx-360

ACW-PIR90-I

WNX 40

ACW-PIR180-O

WXI-R

https://www.optex-europe.com/products/intrusion-detection/wxi-r

ACW-PIR90-O

QXI-R

https://www.optex-europe.com/products/intrusion-detection/qxi-r

ACW-ILB30

SL100TNR

https://www.optex-europe.com/products/intrusion-detection/sl-100tnr

ACW-ILB100

SL350QNR

https://www.optex-europe.com/products/intrusion-detection/sl-350qnr

ATIM_ACW-PIR_UG_EN_V1.4

Technical features

a. Consumption

Product

Standby

Reception

Emission

ACW-PIR360-I

LoRa

15µA

29mA

53mA

Sigfox

13µA

17mA

24mA

ACW-PIR90-I

LoRa

15µA

28mA

55mA

Sigfox

11µA

17,5mA

25mA

ACW-PIR180-O

LoRa

19µA

29mA

57mA

Sigfox

13µA

16mA

26mA

ACW-PIR90-O

LoRa

13µA

29mA

55mA

Sigfox

10µA

16mA

23mA

ACW-ILB30

LoRa

400µA

30mA

60mA

Sigfox

400µA

18mA

25mA

ACW-ILB100

LoRa

400µA

30mA

60mA

Sigfox

400µA

17mA

21mA

b. Power Supply

The indoor (I) and outdoor (O) PIR ranges all use the same lithium battery model: 3v6 format 2 / 3AA.

CAUTION: Do not use other models, otherwise the product may be damaged. Also observe the polarity.

Product

Batteries

Attachment

ACW-PIR360-I

ER17335 3.6V 2/3AA

Support interne

ACW-PIR90-I

ER17335 3.6V 2/3AA

Support interne

ACW-PIR180-O

Pack 2xPiles ER17505H 3,6V

Sur bornier, interne

ACW-PIR90-O

Pack 2xPiles ER17505H 3,6V

Sur bornier, interne

ACW-ILB30

LSH20 SAFT 3,6V

Support interne

ACW-ILB100

LSH20 SAFT 3,6V

Support interne

ATIM_ACW-PIR_UG_EN_V1.4

Operating modes of the PIR

Each device of the ACW-PIR range can be configured in 2 different radio operating modes. By default, the products are

delivered in "counting" mode.

a. Counting mode

In this mode, the product sends back a periodic frame containing the number of detections made in a time interval.

This mode is useful for analyzing the occupancy rate of a room or place during the day, or for counting passages of

people or vehicles at a specific location.

CAUTION: The methods for detecting presence may change from one product to another. Remember to refer to the

corresponding Optex documentation to learn more about the detection method.

Product

Minimum time between 2 detections

ACW-PIR360-I

2 minutes

ACW-PIR90-I

2 minutes

ACW-PIR180-O

5s minimum / 120s recommended

ACW-PIR90-O

5s minimum / 120s recommended

ACW-ILB30

5s minimum / 120s recommended

ACW-ILB100

5s minimum / 120s recommended

From the minimum time between 2 detections Tm and the emission period of the sensor Te, it is possible to estimate

the filling rate of a room over the given period using the formula:

Tx = Nd / (Te / Tm) with Tx, the rate in %, Nd the number of detections done within the hour

Example: With a PIR-90-I configured for emissions every hour, which has counted 23 detections within a period.

Then: Nd = 23, Te = 60min, Tm = 2 min

Tx = 23 / (60 / 2) = 23 / 30 = 0.76 = 76%

The more the period Te is reduced, the more the product consumes, but the more precise we can be on this

measurement over time.

ATIM_ACW-PIR_UG_EN_V1.4

b. Alarm mode

In this mode, the product transmits a frame as soon as it detects a presence. This mode is relevant for detecting

intrusions and being warned instantly.

A periodic frame can also be configured, to get windows of downlinks more often.

CAUTION: The methods for detecting presence may change from one product to another. Remember to refer to the

corresponding Optex documentation to learn more about the detection method.

Product

Minimum time between 2 detections

ACW-PIR360-I

2 minutes

ACW-PIR90-I

2 minutes

ACW-PIR180-O

5s minimum / 120s recommanded

ACW-PIR90-O

5s minimum / 120s recommanded

ACW-ILB30

5s minimum / 120s recommanded

ACW-ILB100

5s minimum / 120s recommanded

NOTE: ISM band regulations impose a limit on the daily transmission time (duty-cycle). This usually means limiting

the broadcast to one frame every 10 minutes.

It is possible to reduce this period if during part of the day the product no longer emits.

For example, if you want to have an active alarm from 6 p.m. to 6 a.m. (12 hours of operation) then you can reduce

the minimum transmission period to 5 minutes.

Conclusion, although the minimum time between 2 detections is less than 10 minutes, by default, the sensor does

not transmit within 10 minutes after the last frame sent.

ATIM_ACW-PIR_UG_EN_V1.4

In these 2 modes, the PIRs also emit a frame if the case is opened, this allows an alert to be raised if the product is

ever torn off, for example.

The products also return a periodic life frame informing about the condition of the battery.

The periodicity of life frames, as well as frames in counting mode can be configured (see Configuration section). By

default, there is a life frame every day, and a count frame every 60 minutes.

First startup

a. Power up

There is no switch on the PIRs, all you must do is connect the battery to the location provided for this purpose (refer

to the Optex manual of the product concerned for more details) and close the product.

b. Test frame emission

When powered on for the first time, the product tries to connect to the network. Once it is connected, it starts up

directly (in counting mode by default).

To quickly trigger a frame to validate the connection, all you must do is activate the case opening / vandalism sensor,

if the product is connected, you will receive an alert frame.

Produxt

Sensor position

ACW-PIR360-I

Internal, on the left of the batteries

ACW-PIR90-I

Internal, on the left of the batteries

ACW-PIR180-O

External, behind the product

ACW-PIR90-O

Internal, front face of the product, on the top left (small black button)

ACW-ILB30

External, behind the product, rubber grey piece

ACW-ILB100

External, behind the product, rubber grey piece

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATIM Modem Handbücher

ATIM

ATIM ARM-D Series Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung