Ativa AT240HP Bedienungsanleitung
20286_s2_416907_LCD_man_cvr.ai
07.10.09
140mm x 216 mm
Jean Co
Greg Smith
xx
MR
20286_LCD Monitor Jean Co
round 2
OUTPUT AT 100 % OF ACTUAL SIZE
FPO Dieline
FPO Callout
BLACK
Call for technical support 1-877-777-4357
Llame para asistencia técnica 1-877-777-4357
Appelez le soutien technique 1-877-777-4357
Before operating this unit, please read all instructions.
Lea atentamente las instrucciones antes de usar este producto.
Veuillez lire toutes les instructions avant d'utiliser ce produit.
Model
AT24OHP
Modelo
AT24OHP
Modèle no
AT24OHP
24"Series Widescreen LCD Monitor User Manual
Manual del usuario del monitor LCD
de pantalla ancha de serie 24"
Manuel de l'utilisateur écran géant
LCD série 24"
216 mm
140 mm
English
Operation Instructions
Thank you for purchasing this high-resolution multi-scan color monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide proper protection against harmful interference to
a residential installation. This monitor generates, uses, and can radiate
radio frequency energy. Harmful interference to radio communication may
be led as a result if it‘s not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If
this monitor does cause serious interference to radio or television reception,
resetting the monitor may determine it. Moreover, users are encouraged to
correct interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the monitor and the receiver further away from each other.
Connect the monitor into an outlet on a circuit different from that to
which the receiver is connected.
Consult your local dealer or an qualied technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power
supply cord and the provided shielded video interface cable with bonded
ferrite cores. Also, any unauthorized changes or modications to this monitor
would void the user‘s authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be
used to meet the emission level limits.
English
Contents
Safety Precautions ............................................................................. 1
First Setup .......................................................................................... 2
Quick Installation ................................................................................ 2
Front View of the Product...................................................................3
Rear View of the Product....................................................................3
Using On Screen Display (OSD) Functions........................................ 4
Supporting Timing Modes ..................................................................8
Technical Information..........................................................................9
Care and Maintenance ..................................................................... 10
Troubleshooting................................................................................10
Warranty Information ........................................................................ 11
English
1
Safety Precautions
This monitor is manufactured and tested on a ground principle that a
user’s safety comes rst. However, improper use or installation may result
danger to the monitor as well as to the user. Carefully go over the following
WARNINGS before installation and keep this guide handy.
WARNINGS:
This monitor should be operated only at the correct power sources
indicated on the label on the rear end of the monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power
company.
The power cord plug must be connected to a properly wired and
grounded power outlet.
Do not try to repair the monitor yourself as it contains no user-
serviceable parts. The monitor should only be repaired by a qualied
technician.
Do not remove the monitor cabinet. There are high-voltage parts inside
that may cause electric shock to human bodies, even when the power
cord is disconnected .
Stop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
Put your monitor only in a clean, dry environment. Unplug the monitor
immediately if it gets wet and consult your service technician.
Always unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the glass screen.
Keep the monitor away from magnetic objects, motors, TV sets, and
transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the socket-outlet shall be installed
near the equipment and shall be easily accessible.
Due to safety concerns, if the VESA mounting kit is purchased separately
please make sure the mounting kit is UL-Listed, and replaced only by
service personnel.
English
2
First Setup
Thank you for purchasing this high performance monitor!
This monitor comes with the following accessories :
Power cable Audio cable
D-Sub cable (15 pin) User’s guide
DVI cable (Optional)
Quick Installation
1. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
2. Connect analog video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to the computer, then to the monitor.
3. Connect DVI cable (Optional)
Connect the DVI cable from DVI output of computer to the DVI input of the monitor.
4. Connect HDMI cable (Not supplied)
Connect the HDMI cable from HDMI output of computer to the HDMI input of the
monitor.
5. Connect audio cable
Connect the audio cable from audio output of computer to the audio input of
the monitor.
6. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
7. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1920 x 1080 @ 60 Hz
Resolution Right-click on the Windows desktop > Properties > Settings >
“Desktop Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.
English
3
Front View of the Product
OSD TURN ON/OFF CONFIRM SELECTION
SCROLL DOWN/DECREASE POWER ON/OFF
SCROLL UP/INCREASE LED INDICATOR
Rear View of the Product
POWER INPUT VGA INPUT (D-SUB 15 PIN)
DVI INPUT (DVI 24 PIN) AUDIO INPUT
HDMI INPUT (HDMI 19 PIN)
1
2
3
1 2 3 4 5 6
4
5
6
7
8
9
11
10
7 8 9 10 11
English
4
Using On Screen Display (OSD) Functions
Display main menu.
Exit from OSD menu.
Shortcut to display input select source adjustment when not in OSD
menu.
Conrm the selection.
▼
Select the desired item when in OSD menu.
When not in OSD menu, it is shortcut to display the Contrast/
Brightness/DCR/ECO Mode adjustment control screen.
▲
Select the desired item when in OSD menu.
When not in OSD menu, it is shortcut to display Opticolor Mode
adjustment control screen.
▼ + ▲ Recall both of Contrast and Brightness.
+ ▼ Power Lock (when not in OSD menu)
+ ▲ OSD Lock (when not in OSD menu)
Main Menu
1
2
1
1
English
5
ShortCuts Function
Auto Image Adjust : To auto adjust Horizontal Position, Vertical Position,
Phase (Fine Tune) and Clock (H. Size) of the screen.
Contrast : To adjust the foreground white level of screen image.
▲:increase contrast, ▼: decrease contrast.
Brightness : To adjust the luminance of the video.
▲: increase brightness, ▼:decrease brightness.
DCR : Allows the user to turn the DCR On or Off.
ECO Mode : Allows the user to turn the ECO On or Off. Contrast and
Brightness adjustment disabled when ECO is active.
Input Select : When press Input Select change Input signal to Analog,
HDMI or DVI.
Audio Adjust : To adjust the audio functions.
Volume :To adjust the volume of speaker output.
Mute :To turn the Mute on/off.
Color Adjust : To select the color for improving brightness and color
saturation between 9300K, 6500K, 5400K, and User Color.
9300K : Adds blue to screen image for cooler white.
6500K : Adds red to screen image for warmer white and richer red.
5400K : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼or ▲button to adjust selected color.
Information : To display the information, regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Manual Image Adjust : To manually adjust the Horizontal Size, H./V.
position, Fine Tune, Sharpness, Video Mode Adjust and OptiColor Mode.
English
6
Horizontal Size : To adjust the width of the screen image.
▼:decrease the width of screen image, ▲:increase the width of screen
image.
H./V. Position : To adjust the horizontal and vertical position of the video.
H. Position: ▲:move screen to the right, ▼:move screen to the left.
V. Position: ▲: move screen up, ▼:move screen down.
Fine Tune : To adjust the delay time of data and clock.
Press ▲or ▼to adjust to your preference.
Sharpness : To adjust the clarity of a non-Full HD (1920x1080) signal
with ▼or ▲button.
Video Mode Adjust : To select the video mode from Full Screen, Over
Screen or Aspect Ratio.
Full Screen : To select full-screen size image.
Over Screen : To select over-screen size image.
Aspect Ratio : Restore the resolution (Non-16:9) for the full screen.So
that images can be displayed.
OptiColor Mode : Provides an optimum display environment depending
on the contents displayed. It contains 5 user-selectable presets.
Standard is for general windows environment and monitor default setting.
Game optimized for PC game environment.
Cinema optimized for movie and video environment.
Scenery optimized for displaying outdoor scenery images.
Text optimized for text editing and viewing in a word processing
environment.
Setup Menu : To set up Language Select, OSD Position, OSD Time Out
and OSD Background.
Language Select : To allow users to choose from available languages.
OSD Position : Press ▲ or ▼ button to select between horizontal and
vertical OSD Position adjustment.
H. Position : To horizontally adjust the OSD position.
▲:move OSD to the right, ▼:move OSD to the left.
V. Position : To vertically adjust the OSD position.
▲: move OSD up, ▼:move OSD down.
?
English
7
OSD Time Out : To automatically turn off On Screen Display(OSD)after a
preset period of time.
OSD Background : Allows the user to turn the OSD background On or Off.
Memory Recall : To recall factory settings for video & audio controls.
Press button 2 to select the Memory Recall menu option.
Inhaltsverzeichnis
Sprachen:
Andere Ativa Monitor Handbücher
