Atlantic Technology FS-7.1 Bedienungsanleitung

Instruction Manual

FS-7.1

7-Channel Soundbar

FS-7.1 7-Channel Soundbar

Table of Contents

Corp.,and may not be duplicated or reproduced by any means,whether physical,electronic

or otherwise without prior written consent from Atlantic Technology International,Corp.

Atlantic Technology and theAtlantic Technology logo are registered trademarks of Atlantic

Technology International, Corp.

Speciﬁcations are those in effect at the time of printing.Atlantic Technology International,

Corp. reserves the right to change speciﬁcations or designs at any time without notice

without obligation to modify existing units.

FS-7.1

7-Channel Soundbar

Thank you for choosing Atlantic Technology products. Your new speaker

components are precision-crafted to give you years of enjoyable, trouble-

free service. This manual covers the Atlantic Technology FS-7.1 speaker

system. This speaker can be used with all current and past sound formats

including Stereo,Dolby Surround®,Pro Logic®,Dolby Digital 7.1 and 5.1®,

Dolby Digital EX®, DTS®, DTS ES®, DTS ES Discrete®, DTS Neo:6®, DVD-

Audio and SACD Audio.

IMPORTANT:

Although it may seem like asking for driving directions,

please take a few moments to read all of this booklet. It has many

helpful tips and ideas on properly setting up and using your system.

We promise that if you take the time to read and follow these tips

you’ll get better system performance and more enjoyment.

Unpacking the Speaker

Use care when unpacking the speaker. Remember to keep the original box

and packing material, in the unlikely event the speaker needs servicing, or

if you move.

Table of Contents

2 Unpacking the Speaker

3 Description

3 Model FS-7.1 7-Channel Soundbar

4 Placement

4 Speaker Placement and Home Theater

5 Mounting

6 Receiver Setup for use with FS-7.1

6 Setting the OUTPUT Levels

6 Setting the Delay Distance on Your Receiver for Best Results

7 Setting the Delay Levels on Your Receiver

7 Speaker Radiation Pattern

8 System Setup

8 System Setup when using a Subwoofer

8 System Setup Without a Subwoofer

9 System Wiring

10 Connecting Your System

10 Care of Your Speaker

11 Speciﬁcations

For Future Reference

Record the serial number and date of purchase of the speaker here.The serial number is

found on the back of the enclosure.

Serial Number

Date of Purchase

Instruction Manual

Component Description

Description

Model FS-7.1 7-Channel Soundbar

The Model FS-7.1 Surround Bar Loudspeaker is an integrated high-per-

formance loudspeaker containing all seven channels of speakers in a single

elegant, slim enclosure. The speaker can be either wall-mounted above or

below the video display, or it can be placed on a shelf or attached to a ﬂat-

screen wall mount bracket that has the appropriate speaker adapter.

This speaker uses several advanced technologies to produce convincing

7-channel surround sound from a conventional-looking sound bar. The

three 1”soft-dome tweeters deliver the high-frequency content for the three

front LCR channels of the home theater system.These tweeters were chosen

for their exceptionally ﬂat, accurate response and wide dispersion.

The two 4 x 6-inch speakers on the front bafﬂe are unique: Each is a dual

voice coil driver—the left driver handles the left front channel and “half”

of the center channel, while the right driver plays the right front channel

and “half ” of the center. This is a particularly advantageous situation, in

that it preserves the tightly-focused LCR “imaging” that is the hallmark

of a top-quality home-theater sound system, but saves space and reduces

cost by only requiring two drivers instead of three.Additionally, the use of

4 x 6-inch drivers minimizes the height of the FS-7.1’s cabinet compared

to what it would be if 5 ¼” drivers were used while retaining virtually the

same radiating area, for strong acoustic output.

FS-7.1 rear

FS-7.1 front

Figure 1

Even greater innovation is at work in the side-ﬁring surround drivers.First,

the angle at which the surround drivers ﬁre out into the room has been pre-

cisely calculated to produce the greatest sense of surround “envelopment”

by the listeners.

These drivers are also dual voice coil drivers: The two voice coils play the

side 5.1 and back 7.1 surround channels,which is then reﬂected off the side

wall and around the listeners’ ears.

By utilizing these unique drivers in an innovative array and taking full

advantage of well-known psycho-acoustic effects,the FS-7.1 creates impres-

sive and convincingly three-dimensional theater sound from virtually any

movie soundtrack—without the need for expensive on-board electronic pro-

cessing circuitry and built-in ampliﬁers!

Full 7-channel surround sound, with the simplicity of connection to a

familiar surround receiver—and no speaker boxes cluttering up the room!

16" (406mm)

97⁄8" (251mm)

FS-7.1 7-Channel Soundbar

Placement

Speaker Placement and Home Theater

Remember that the primary goal of a good home theater is not to make you

believe that you are in a movie theater. It’s to make you believe you’re in the

movie.For a home theater system,place the FS-7.1 speaker either above or

below your ﬂat screen display, centered horizontally. See Figure 2.

The FS-7.1 can be used as a set-top or shelf-mounted speaker.Self-adhesive

rubber feet are included to prevent vibration,protect the mounting surface

and serve to angle the speaker up or down if needed.

You may also simply mount the speaker to the wall using the built-in key-

hole brackets or attach it to a suitably equiped articulating ﬂat-panel TV wall

mount via the threaded inserts on the rear panel of the FS-7.1.

Above

Below

FS-7.1 should be

placed as close to ear level as

possible. For best surround effect,

it should be within 6-10 feet of a

reflecting side wall.

Subwoofer

placement is

dependent on room

size and shape.

Experiment to find a

location that

produces the

smoothest response.

Placement

Figure 2

Speaker Placement

CAUTION:

Because of the high quality components used, the FS-7.1

speaker is very heavy for its size and care must be used when hanging it.Be

sure to use a strong screw to drive into the wall, one whose head and shaft

will ﬁt properly within the keyhole opening and slot. Also be sure to drive

the screw directly into a stud or to use a mounting device (such a molly-

bolt) that is capable of safely holding the speaker’s weight. Never simply

drive a nail or screw into sheet rock or other wall materials,as this mount-

ing method may not be sufﬁcient to safely support the weight of the speaker.

NOTE:

Always consult a knowledgeable installer regarding the proper

mounting hardware to use with your speakers. Mounting the speaker

safely and securely is the responsibility of the owner.

See Figures 3 and 4 on next page for mounting instructions.

Instruction Manual

Mounting

Figure 3

Small round rubber spacer (4 per package) placement for wall mount

and table mount isolation

Figure 4

Large rectangular rubber foot (2 per package) and small round rubber spacer

(2 per package) placement for shelf or set-top placement

NOTE:

Tilting the speaker is primarily for visual aethetics,

as the excellent dispersion of the FS-7.1's drivers generally

yield outstanding sound distribution without such tilting.

Rubber foot Rubber feet

Use taller feet for up or down tilt

Adhesive side Adhesive side

FS-7.1 7-Channel Soundbar

Receiver Setup

Receiver Setup for use with FS-7.1

Setting the OUTPUT Levels:

1. In the Receiver Setup Menu:

a. Go to Speakers or Audio Setup,Find Speaker Loudness

orVolume

b. For the Left,Center,and Right Channels,lower the output of

each to a -3dB,(minus 3dB).

c. For each Rear and/or Surround Channel,Left and Right,leave

the output at 0dB.

2. If youhave aparticularlybigroom,or wantalittle moresurroundeffect,

thenraisethe SurroundChannelsto+1or+2dB (leavingthe frontLeft,

Center, and Right channels at -3dB).

Setting the Delay Distance on Your Receiver for

Best Results

The FS-7.1 will deliver convincing 3-dimensional surround sound from

it's single enclosure. For maximum effect, we recommend you set your

receiver as follows:

Most AV Receivers today make it pretty easy to set the “Time Delay” for

each of the different channels.In the Receiver Setup, usually in the Speaker

menu area,one option will be“Delay”or“Distance.”It will then take you to

each Channel and ask you to enter the “number of feet” you normally sit

from each speaker.

1. For the Left,Center,and Right Channels,for example,if your listening

position is 10ft from the front of the speaker bar, then enter “10 feet”

for the left Channel,“10 feet”for the Center Channel, and “10 feet” for

the right Channel.Simply measure the distance from where you sit to

the front of the speaker bar and enter that number.

Sounds from the left and right Side Surround and left and right Back

Surround Channels come from the speakers at each end of the FS-7.1,

which are angled to the side.

2.Set the distance for the surround chanels the same as for the front

channels.For example,if the fronts are set to "10 feet," set the side and

back surround channels to "10 feet" also.

IMPORTANT NOTE:

The power recommendation for this speaker system

assumes that you will not operate your ampliﬁer/receiver in a way that

produces distortion. Even rugged speakers like these can be damaged by

an ampliﬁer driven into audible distortion. The harsh ampliﬁer distortion

(“clipping”) that occurs in this situation will eventually cause damage to

the speaker system. This type of damage may be cumulative and can build

up over time, as the ampliﬁer is driven into overload again and again. Such

damage is easily identiﬁable through examination of the damaged speaker’s

voice coil and is not covered by the warranty.

This speaker will play very loudly when provided with enough undistorted

power to do so. If necessary, consult your dealer or Atlantic Technology for

additional information.

Instruction Manual

Receiver Setup

Setting the Delay Levels on Your Receiver

Speaker Radiation Pattern

Front

Left

Center Front

Right

Setting the 'Distance/Delay Time'

on your receiver

Front Left, Center, Right Channels–enter "10 feet,”

for example. Surround Channels–set the same

distance as the front channels.

Surround Channels

Front Channels

10 feet, in this example

Front

Left

Center

Front

Right

FS-7.1 delivers 3-dimensional sound

from single enclosure

Side Surround Channel

Back Surround Channel

FS-7.1 7-Channel Soundbar

System Setup

System Setup When Using a Subwoofer

Some older surround sound decoders and receivers offer a choice of“Nor-

mal” or “Wide-band” modes for the center channel speaker. The FS-7.1

speaker is designed to be used in the Normal mode.

Modern digital processing multi-channel systems provide a Bass Man-

agement menu, which typically requires you to select between “Small” or

“Large” speakers during system set-up. When using this speaker with a

dedicated subwoofer, please set all the speakers on the receiver’s set-up

menu to Small.

Many of the newer surround receivers and processors give you a choice of

subwoofer-to-satellite crossover frequency. If yours does, we recommend

that you start with a setting of around 80Hz for the LCR and 120Hz for the

surrounds for the smoothest blend between the subwoofer and the FS-7.1.

System Setup Without a Subwoofer

For some listeners, a full home theater setup with a separate subwoofer

may not be feasible or desired. In that case, the FS-7.1 will provide high

quality sound all by itself—far better than the small speakers built into

most televisions.In those situations,we recommend you set your surround

sound receiver’s set-up menu to “Subwoofer—Yes.”

Then set the speaker's size to “small.”Set the front crossover to 60Hz.Set

the surround crossover to 100Hz. That way, all the bass from 60Hz and

above will be sent to the FS-7.1,which will result in a full-bodied,credibly

full-range sound to be reproduced by the FS-7.1, while at the same time,

preventing the very low bass signals (below 60Hz) from overdriving the

receiver’s ampliﬁer section at high output levels.

Instruction Manual

LEFTCENTERRIGHT LEFT

SURROUND

RIGHT

SURROUND

LEFT

BACK

RIGHT

BACK

RIGHT BACK RIGHT SIDE RIGHT FRONT CENTER LEFT FRONT LEFT BACKLEFT SIDE

System Wiring

Be sure to connect red (+) on the speaker to

red (+) on the ampliﬁer and black (–) on the

speaker to black (–) on the ampliﬁer.

If using a 7.1 channel receiver

FS-7.1 7-Channel Soundbar

Care of Your Speakers

Connecting Your System

We recommend that you connect your system using high quality dual

conductor stranded wire of 16 gauge or heavier, for lengths up to 25 feet

(8m) . Remember, the lower the gauge number, the heavier the wire. Use

heavier gauge wire for longer runs.Please contact your audio/video dealer

or installer for speciﬁc cable recommendations and further information

regarding special circumstances.

WARNING:

To prevent risk of electrical shock or damage to your

equipment, always switch off the ampliﬁer or receiver when making

any system connections.

Remove ½” (13mm) of insulation from each wire end.

Twist the stranded wire together, keeping the two ends

separate.

Place the appropriate wire through the postholes in the

connectors. These holes are revealed when you push down

on the post.

It’s important to observe polarity while making speaker connections: red

(+) terminals on the ampliﬁer to red (+) on the speaker, black (–) on the

ampliﬁer to black (–) on the speaker. Look carefully at the wires you are

using and note that one of the conductors of each pair will typically be iden-

tiﬁed by color, printing on the outer jacket, ridges on the outer jacket, or a

thread intertwined with the wire strands.By convention,the marked wire is

connected to the red (+) terminal.Whether you are connecting a complete

system, or adding a single speaker component to your present system, the

wiring should look like the system wiring diagrams on the opposite page

WARNING:

Before turning on the ampliﬁer, be certain that no stray

wire strands are touching across any terminals as this might damage

your ampliﬁer.

Finally,check the polarity of your speakers by listening to some stereo music

with good bass content.If the sound seems“hollow”,unusually spread out,

or seem to have weak bass, recheck your connections for proper polarity

and correct any out of phase connections by reversing the connections.

Care of Your Speaker

Clean your cabinet using a soft, lint-free cloth. If you wish,you can slightly

moisten the cloth with plain water. Do not use any other cleaning agents

or chemicals.Be careful not to get any water on the driver cones or tweeter

domes. After carefully removing the grilles from the speaker, gently clean

them with a very slightly damp, lint-free cloth.

To do so, use a ﬁne awl or pick to gently pry the center grille forwards. Pro-

tect the cabinet's pry area with a piece of thin cardboard (like a matchbook

cover, etc.).

The screws which secure the end grilles will then be visible.

Avoid placing your speakers in direct sunlight or near a source of heat that

may, over time, damage the ﬁnish.

IMPORTANT: SAVE YOUR BOX!

If you can do so, save the carton,

packing pieces, and plastic bags that came with your speaker. They

will be useful in case you move or have to ship your loudspeaker for

any reason. In any case, save all packing materials until you are certain

that the system has suffered no damage in shipment. If you ﬁnd such

damage, either visible or internal, contact your dealer immediately.

Inhaltsverzeichnis

Andere Atlantic Technology Lautsprechersystem Handbücher

Atlantic Technology

Atlantic Technology Compact Theater High Performance Compact Bedienungsanleitung

Atlantic Technology

Atlantic Technology System 270 Bedienungsanleitung

Atlantic Technology

Atlantic Technology System 8200e Bedienungsanleitung

Atlantic Technology

Atlantic Technology 251 LR Bedienungsanleitung

Atlantic Technology

Atlantic Technology Atlantic FS-4000 Betriebsanleitung

Atlantic Technology

Atlantic Technology 151 LR Bedienungsanleitung

Atlantic Technology

Atlantic Technology IW-30 LCR Bedienungsanleitung

Atlantic Technology

Atlantic Technology System 350 THX Bedienungsanleitung

Atlantic Technology

Atlantic Technology FS-3200 Bedienungsanleitung

Atlantic Technology

Atlantic Technology 221 LR Bedienungsanleitung

Atlantic Technology

Atlantic Technology System 8200e Bedienungsanleitung

Atlantic Technology

Atlantic Technology 153 C Bedienungsanleitung

Atlantic Technology

Atlantic Technology 2200 C Bedienungsanleitung

Atlantic Technology

Atlantic Technology 4200e THX Select Bedienungsanleitung

Atlantic Technology

Atlantic Technology System 4.5 Bedienungsanleitung

Atlantic Technology

Atlantic Technology ICTS-6 LCR Betriebsanleitung

Atlantic Technology

Atlantic Technology AW-424 Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung