Atlas Copco POWER FOCUS 6000 Merkblatt

MT Focus 6000

Printed Matter No. 9839 0527 01 Control and drive unit

Publication Date 2022-02-04

Valid for Version No. 2.0.2 Configuration Manual

MT Focus 6000 8432085100

WARNING

Read all safety warnings and instructions

Failure to follow the safety warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

2© Atlas Copco Industrial Technique AB - 9839 0527 01

Table of Contents

Liability ....................................................................................................................3

Configuration overview ..........................................................................................4

MTF 6000 navigation ........................................................................................4

User interface ...................................................................................................5

Connectors .......................................................................................................6

Settings....................................................................................................................8

Results..............................................................................................................8

Result view ............................................................................................8

Step results............................................................................................8

Torque/angle graph ...............................................................................9

Batch sequence.....................................................................................9

Custom view ..........................................................................................9

Measurement view ................................................................................9

Multiple result view ................................................................................9

Tightening .......................................................................................................10

Batch sequence ..............................................................................................10

Import/Export via USB ....................................................................................11

Configuration ..................................................................................................11

Logging in and out of the controller ................................................................12

Shortcuts.........................................................................................................13

Icons ...............................................................................................................13

MT Focus 6000 EN Liability

Liability

Many events in the operating environment may affect the tightening process and shall require a validation

of results. In compliance with applicable standards and/or regulations, we hereby require you to check the

installed torque and rotational direction after any event that can influence the tightening result. Examples

of such events include but are not limited to:

■initial installation of the tooling system

■change of part batch, bolt, screw batch, tool, software, configuration or environment

■change of air- or electrical connections

■change in line ergonomics, process, quality procedures or practices

■changing of operator

■any other change that influences the result of the tightening process

The check should:

■Ensure that the joint conditions have not changed due to events of influence.

■Be done after initial installation, maintenance or repair of the equipment.

■Occur at least once per shift or at another suitable frequency.

Configuration overview EN MT Focus 6000

4© Atlas Copco Industrial Technique AB - 9839 0527 01

Configuration overview

MTF 6000 navigation

The front panel contains a display and a keypad.

A Display

B Indicator light

C Arrow buttons

D OK button

E Back button

Button Name Description

Arrow buttons Use the arrow buttons to navigate

in the menus on the display.

Use the arrow buttons to set nu-

merical values on the display.

Back button Use the back button to move back

between menus.

In some cases you can use the

back button to cancel a selection.

OK button Press the OK button to confirm a

selection.

Hold the OK button to open the lo-

gin/reboot menu.

MT Focus 6000 EN Configuration overview

User interface

A Results

B Tightening

C Batch sequence

D Import/Export via USB

E Configuration

Configuration overview EN MT Focus 6000

6© Atlas Copco Industrial Technique AB - 9839 0527 01

Connectors

The following external connections are possible:

■Digital I/O device:

A 24V digital I/O device can be connected through Digital I/O port.

■Scanner:

■A USB HID, such as keyboard, can be connected through USB Host port.

■An RS232 scanner can be connected through COM port.

The USB-scanners must have:

■USB HID interface (Keyboard)

■English-US keyboard interface

■Vacuum pump:

A vacuum can be connected through VP port.

■Single USB flash drive:

A USB flash drive can be inserted into the USB Host port.

■USB hub:

MT Focus 6000 EN Configuration overview

A USB hub with up to 4 ports can be connected to the USB host port. The USB hub can have two

scanners connected at the same time. Do not connect more than one USB flash drive, because only

one USB flash drive can be detected by the MTF 6000. The total maximum current of the connected

devices is 900 mA.

Settings EN MT Focus 6000

8© Atlas Copco Industrial Technique AB - 9839 0527 01

Settings

Results

When a tightening is performed, the results are stored on the controller. Results can also be sent to an ex-

ternal system such as ToolsTalk and ToolsNet. The results can also be exported by using an USB flash

drive.

Result view

The result view menu shows live results from the latest tightening.

A Result view.

B Tightening status indicator.

C Number and name of active Pset/Batch sequence.

D Final torque.

Set in ToolsTalk MT Pset > General settings > Report.

E Final angle.

Set in ToolsTalk MT Pset > General settings > Report.

Step results

The step results menu shows live results from the latest tightening. It can show the following information:

■Step number and result:

■Grey - not executed

■Green - OK

■Red - failed.

■Peak torque for each step.

■Angle for each step.

■Time for each step.

■Max. peak torque of the tightening.

■Total angle.

■Total time.

MT Focus 6000 EN Settings

Torque/angle graph

The torque/angle graph menu shows the graph from the latest tightening with the following additional infor-

mation:

■Peak = Peak torque

■α = Total angle.

■t = Time

Batch sequence

The batch sequence menu shows live results and information from the active batch sequence.

Custom view

The custom view makes it possible to customize the last view on the controller from ToolsTalk MT. The

data selected for the custom view will only be displayed during the selected Pset. If no Pset is selected the

screen will be blank.

The screen can be configured to show one to four fields. For each field it is possible to display general or

step data.

The first field have a white background, the following have grey background. This is to give a focal

point and have no other intended meaning.

Measurement view

The measurement view shows the live result from the latest measurement:

■Result header: Green + OK or Red + NOK

■Verification program number and name: -- will show if no verification program linked.

■Verification progress count: x/y to display current progress. if no verification size is set the controller

will display an infinity symbol.

■Live reference torque.

Multiple result view

The multiple result view is a summary of all the results in the verification.

Settings EN MT Focus 6000

10 © Atlas Copco Industrial Technique AB - 9839 0527 01

A Current progress. If no verification size is set, an infin-

ity symbol is display.

B Reference torque.

C Torque from tightening controller (only available if veri-

fication is run through USB Sync.

D Deviation from target (only available if there is a tar-

get).

E Result status: Green = OK; Red = NOK.

F Sequence number.

G Target torque.

H Average reference torque.

I Average tightening torque.

J Cmk control limit.

K Cmk.

L Average deviation from target.

Tightening

Description

Select Pset A list of the available Psets.

Select V. Program A list of the available verification programs.

Quick programming Create a Pset or a verification program.

Start tightening Starts the active Pset.

Stop tightening Stops the rotation of the tool.

Quick programming

To use quick programming perform the following steps:

1. Select Tightening in the first page menu.

2. Select Quick programming.

3. Select which tightening program to create, Pset or Verification program

4. Select the desired parameter to edit the value.

5. Use the up and down arrows to increment/decrement the values.

6. Scroll down and press Save settings.

Quick programming will save to an available Pset number. If no Pset number is available, you must

delete an old Pset to save a new one.

Batch sequence

Batch sequences are used to perform a specified number of tightening, event and information steps in a

specific order.

Description

Select Batch sequence Select a Batch sequence.

Reset Batch Resets the current batch.

Andere Handbücher für POWER FOCUS 6000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Atlas Copco Controller Handbücher

Atlas Copco

Atlas Copco FOCUS 60 Bedienungsanleitung

Atlas Copco

Atlas Copco Power Focus 600 Bedienungsanleitung

Atlas Copco

Atlas Copco Power Focus 4000 Graph Bedienungsanleitung

Atlas Copco

Atlas Copco TPS Control Bedienungsanleitung

Atlas Copco

Atlas Copco POWER FOCUS 6000 Bedienungsanleitung

Atlas Copco

Atlas Copco EBL Drive Merkblatt

Atlas Copco

Atlas Copco POWER FOCUS 6000 Bedienungsanleitung

Atlas Copco

Atlas Copco MINI-REG-1/4-BSP Merkblatt

Atlas Copco

Atlas Copco Xc1004 Bedienungsanleitung

Atlas Copco

Atlas Copco R9 Bedienungsanleitung

Atlas Copco

Atlas Copco ECO Zc1510 Bedienungsanleitung

Atlas Copco

Atlas Copco Power Focus 4000 Compact Merkblatt

Atlas Copco

Atlas Copco Gamma Vacuum DIGITEL SPC-NEG Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch