Atlas Copco ZBP 2000 Betriebsanleitung

ZBP 2000 Mobile Energy Storage Power Supply

User Operating Manual

Please read this manual carefully before using the product and keep it properly.

Product Introduction

Handle

Parallel Port

Grid Charging Port

Overload Protector

Wheels Rubber Mat Drawbar

Display Screen

Main switch

AC Output Switch

Alarm Indicator

AC/DC Output Socket

Product Introduction

Air outlet

Air inlet

Output Socket

Solar

Panel Input

USB Port

Product Introduction

Alarm Indicator

Main Switch AC Output Switch

AC Output

IndicationArea Abnormal Status

IndicationArea Battery Remaining

Time Indication Area

Parallel

WIFI

Solar

Charging

SOC

Power

Display Area

Output Switch

USB

Output

TYPE-C

Output

Overload Protector

Solar

Panel Input

AC Output Socket

Accessories List

Item Charging Cable Manual

Picture

Quantity 1 PC 1 PC

Safety precautions

I. Safety Notes:

1. Do not use this product near heat sources, such as fire or electric ovens !

2. Do not use use this product upright, it will cause the air tunnel towards the ground blocking the air inlet and outlet !

3. Please do not use this product in heavy rain or stormy weather! Immersed in water is prohibit !

4. Do not use this product in static electricity or strong magnetic field environment !

5. Do not disassemble this product in any way, please contact after-sales or local distributor for any problems !

6. Do not use unapproved accessories, if you need to replace or purchase accessories, please contact us!

7. Please be sure to follow the ambient temperature specified in this manual. If the

temperature is too high, it may lead to fire or explosion. If the temperature is too low, the product performance may be

degraded or not work !

8. Please avoid violent impact, drop or vibration of the shell. In case of violent vibration or shock, please cut off the

power and stop using the product. Please fix the machine firmly during transportation to prevent violent vibration or

impact !

9. Do not use in unventilated, strongly dusty environments !

10. If the product is on fire, we recommend extinguishing the fire in the following sequence: atomized water, sand,

fire hood, dry powder, carbon dioxide extinguisher.

11. Clean the machine with a clean gauze and cotton cloth !

12. Please keep the product out of reach of children and pets !

II. Disposal Safety Instructions:

1. If it is permitted, please discharge the battery completely, and dispose of it in a proper battery recycling bin, this

product contains hazardous chemicals, therefore, do not discard the product in the ordinary rubbish bin. please refer

to the local laws and regulations regarding the recycling and disposal of batteries !

2. If the battery cannot be fully discharged due to a failure, do not discard it directly in the battery recycling bin. You

should contact a company that specializes in battery recycling for further processing !

Product Specification Parameters

1. General Parameters:

Capacity 2KWh

Charging time ≈ 4h

Overall weight ≈37KG

Battery type Lithium iron phosphate

Dimension 570x367x478 mm

Protection rating IK09 / IP65

Certificates

FCC/SAA/CE/ETL/UKCA

2. Input:

Input voltage 110Vac

Charging current ≤ 4A

Charging power ≤ 900W

Solar charging

voltage 12V~75V

Solar charging

current ≤15A

Solar charging

power ≤ 800W

3. Output:

Output voltage/Frequency 110Vac/50Hz±1%

Rated current 9A

Output socket 16A

Parallel port socket 16A

Max qty of parallelled units

5 Pcs

USB type USB-A:1Pcs USB-C:1Pcs

USB rated output 5Vdc/9Vdc/12Vdc 18W Max

Output of USB used

simultaneously 5Vdc 10W Max

4. Storage:

Storage

temperature -20℃~ +45℃

(3 months)

-10℃~ +25℃(6months)

Storage humidity ≤ 75%

Product Specification Parameters

5. Working Environment:

Charging temperature

-20℃~ +45℃

(Ambient temperature)

Storage temperature -20℃~ +45℃

(Ambient temperature)

Cycle lifespan ≥2000 cycles,

capacity≥80%

6. Overload capacity:

Load current＜105% Normal works

Load current

105%～130% Operating time<1min

Load current

130%～200% Operating time<1.5S

Load current＞200% Operating time<300ms

7. Battery Parameters:

Rated voltage 48Vdc

Operating Voltage 37.5-54.75Vdc

Charging time ≤ 3 h(25℃ambient

temperature)

Discharging power ≤400W Battery temperature

﹣20℃~0℃

Discharging power ≤1000W Battery temperature

0℃~15℃

Discharging power ≤2000W Battery temperature

15℃~45℃

Overvoltage protection point

of charging total voltage 53V

Undervoltage protection point

of discharging total voltage 40V

Overvoltage protection point

of charging single cell 3.5V

Undervoltage protection point

of discharging single cell 2.8V

Operations

1. Start Up

Press the main switch button (Figure 1) on the panel (the button light is on), the machine turns on, displaying the startup screen (Figure

2), the rear fan self-check program starts, 15s later the screen enters the user interface (Figure 3), the alarm indicator (Figure 4) lights

up in yellow, the machine starts up !

Figure 1 Figure 2

2. Charging

Take out the charging cable from the accessories bag,plug one end into the grid power supply,and the other end into the grid charging port on

the side of the machine with a matching plug (Figure 5). When the power is on, the screen displays the charging power, the battery icon

background color is green (Figure 6), shows the current power and remaining work time, the charging indicator icon on the screen lights up

(Figure 7). When the battery temperature is in -20℃~0℃, the battery heating program is started first,and the abnormal status indication area

of the screen shows as (Figure 8),the battery icon shows (Figure 9).At this time, the maximum load of the machine is 400W; when the battery

temperature is lower than -20 ℃,the abnormal state indicator area of the screen shows as (Figure 10),the battery icon shows (Figure 11),then

the machine can not work!

Figure 5

Figure 6 Figure 7

Figure 8

Figure 9

Figure 10

Figure 11

Figure 3 Figure 4

Operations

3. Solar Charging

Open the transparent waterproof cover on the front of the machine (press the upper part of the 3 clasps in the picture to loose

the buckle then open front cover)(Figure 12),insert the plug of the solar panel into the solar input port (Figure 13), at this time the

solar indicator on the screen lights up (Figure 14),and the power display area shows the current solar charging power !

Solar panel

Figure 13

Figure 12

Figure 14

Inhaltsverzeichnis

Andere Atlas Copco Stromversorgung Handbücher

Atlas Copco

Atlas Copco PP 100 Wartungs- und Serviceanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung