ATN Night Patriot Bedienungsanleitung

AMERICAN

TECHNOLOGIES

NETWORK

CORP.

u s e r ` s g u i d e

Night Patriot

The information in this manual furnished for information use only, is subject to change without notice, is not to be

construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

Built-in Infra-red Illuminator

Multicoated lens

Digital Control for IR

ON/OFF

Eyepiece

One three volt battery

Threads

IR Light indicator

Power Light

indicator

APPLICATION

The Patriot Multi-Purpose System (MPS) is designed to be the ultimate Night Vision Device.

This versatile unit can be used in night vision time situations as a compact hand spotting

scope, a hands free goggle system, a weapon sight, and applicable for video or photography.

If versatility is what you are looking for in night vision device then the Patrior MPS is the system

for you. The Patriot system allows you to custom design your own personalized unit. By order-

ing different packages you can build a system that fits your specific night vision needs.

To build the perfect system you must start with the perfect base unit to build upon. By utilizing

a high resolution 2nd or 3d generation US intensifier tube the Patriot has one of the brightest

and sharpest images available. A built-in illuminator allows you to see clearly even in total

darkness. Combine this with all glass optics specially coated to absorb light and the Patriot is

an exellent compact pocket scope.

PATRIOT I

• 1st Generation US

• 1x30mm lens

• 30mm Eyepiece

• All glass multi-coated lenses

• Built in infrared Illiminator

• Soft carrying case

• Red on Green weapon sight eyepiece

• Mounting rings, 4x90mm 6 element lens

• Long Range IR

• Goggle Kit (Head set with chinstrap, Transfer piece)

• 3 element Magnification Doubler

• Camera/Camcorder adapter

• Pelican waterproof hard case

PATRIOT II

• 2nd Generation US

• 1x30mm lens

• 30mm Eyepiece

• All glass multi-coated lenses

• Built in infrared Illiminator

• Soft carrying case

PATRIOT III

• 3rd Generation US

• 1x30 mm lens

• 30 mm Eyepeice

• All glass multi-coated lenses

• Built in infrared Illiminator

• Soft carrying case

A Long range IR is also available. This will extend the infrared range out to 100 meters.

lens of the IR

main body of IR lock ring

cap

thread

thumb screw

OPERATION

• Take the monocular out of the case.

• Install the batteries into the housing with the polarity order as shown on the scope. Battery

Type: 3 Volt Lithium, #CR123A

• Press Button marked –/O to turn unit on with the protective lens cover still attached to the

lens. Do not turn unit on in the daytime without the protective lens cap on. You should

see a green glow in the eyepiece

• Observe the scene, and adjust the diopter for optimal image clarity.

• You may now enter a dark environment, or simply shut the lights off in order to darken the

room.

• Next, remove the lens cap/daylight filter. Adjust front lens for distance focus. You should not

have to readjust diopter.

• You will need to focus the objective lens for different distances.

LONG-RANGE INFRA-RED ILLUMINATOR

The long range IR works on a separate battery from the main unit. To install the battery

unscrew cap and insert battery in the same direction as depicted by the diagram on the IR. To

install the long range IR to the main body of the Patriot screw the thumb screw on the IR into

the thread on the body of the Patriot.

You may notice that IR might not shine directly in the middle of your viewing image. This can be

adjusted by unscrewing the lock ring, then adjusting the main body of IR. Once you have the IR

aimed in the correct direction re-tighten locking ring. You may desire a different field of coverage

from the IR illuminator. If so the beam is focusable. By turning the lens of the IR you will change

the beam width slightly.

base of the front lens doubler body of Patriot eyepiece

90mm lens

30mm lens

2x doubler

30mm

eyepiece

15mm eyepiece

eceipeyemm03 eceipeyemm51

snelmm03 x1 x2

relbuodx2&snelmm03 x2 x4

snelmm09 x3 x6

relbuodx2&snelmm09 x6 x21

CHANGING FRONT LENS/DOUBLER

Increasing and decreasing magnification.

The Patriot can have several different magnifications. This is achieved by using different combi-

nations of lenses and eyepieces. The table below shows what magnifications can be achieved.

To change eyepiece unscrew connector ring and remove eyepiece, screw new eyepiece on.

To remove the front lens unscrew the lens by turning the base of the front lens, screw new

front lens on.

To add doubler insert Doubler between front lens and body of the Patriot.

Thumb screw

Thread

Body of the Patriot

Headset

insert piece

Lever

Headset

Transfer piece

FOCUSING

To focus the Patriot first you will need to adjust the diopter. Simply turn the diopter clockwise

until it stops. Then, while looking through the diopter at a sub-

ject, slowly turn the diopter back counter clockwise until the

grain in the image is sharp.

NOTE: We suggest that you focus the diopter during daylight

with the filter on.

Next. When you are in low-light conditions and the daylight filter

is off, you may focus the front lens to receive a sharp image, the

diopter should not be adjusted.

NOTE: The front lens should be readjusted as you view objects at different distances.

INFRA-RED ILLUMINATOR

Infra-red illuminators, or IR illuminators, are common to night vision.

The IR light greatly enhances the performance of the Patriot while

remaining almost totally invisible to the naked eye. The IR illuminator

on the Patriot is located on the side of the unit.

To turn the IR on, push the IR button and you will see an orange indica-

tor light come on. It is important to remember that the IR illuminator is

simply an infra red light source, and like any light source, it may loose

its effectiveness over a great distance. This IR should illuminate out to

approximately 30 yards. For a longer IR distance add the long range

IR.

NOTE: The IR will automatically turn off when the unit’s main power is

turned off.

GOGGLE SYSTEM

To turn the Patriot into a goggle system you need to attach the transfer piece to the main body

of the Patriot. Screw the thumb screw on the transfer piece into the thread on the body of the

Patriot.

Then, to put the Patriot onto the Headset, insert the piece of the transfer piece into the Head-

set. To disassemble, push down the lever.

Green Reticle

remove cap

eyepiece main body large mounting ring 90mm lens

Camera adapter

USING THE CAMERA ADAPTER (OPTIONAL)

To use your Patriot with a 35mm camera or camcorder you will need the following:

1) If you plan to use a camcorder then your camcorder must have a MACRO feature. Most

modern camcorders today have a MACRO feature builtin.

2) If you plan to use a 35mm camera, you will need a MACRO lens. If you don’t have one, we

advise that you contact your local camera store.

3) You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt the camera

adapter to your lens. NOTE: The camera adapter comes with 37mm and 52mm threads. If

you need other sizes your local camera store should be able to help.

• Remove the rubber eyecup from the Patriot

• Screw the camera adapter onto the front of the lens on your Video camera’s lens or your

35mm camera’s lens.

• Loosen the three set screws on the camera adapter.

• Place the camera adapter over the Patriot’s eyepiece.

• Tighten the three set screws to fit snugly to the Patriot’s eyepiece

• You may need to focus the 35mm camera or video camera in combi-

nation with the Patriot in order to get the sharpest possible image.

• We suggest that you find an open space to work in. Focus the Patriot

so that the scene is at its sharpest. For best results you should dis-

able the auto focus (if any) on either the 35mm camera or the video

camera and manually focus the 35mm camera or the video camera.

Once the image is sharp, then simply adjust the Patriot’s front lens to

change focus.

*An important part to remember is that you are not taking a picture of an

object that is far away from you, but you are actually taking a picture of a

phosphorous screen of the Patriot that is only 2-3 inches away.

WEAPON KIT

First remove eyepiece. Add Red on Green Reticle eyepiece to main body of the Patriot.

Remove the 30mm front lens and add the 90mm lens. Put the large mounting ring around the

front lens. Mount the scope to the standard weaver rail.

To insert the battery, 3V, Lithium (CR2032), into Red on Green Reticle remove the cap. Bright-

ness of the reticle can be adjusted by turning the numbered dial on the reticle. To adjust wind-

age and elevation remove the dust caps off of the knobs. Each click equals 1/8 inch at 100

yards.

Long rail

UltraSight

Fixator

screws

Position for daytime use

Joint ring

Bi-occular

Your Patriot

BI-OCULAR KIT

To replace an eyepiece with a bi-ocular eyepiece unscrew the joint ring and take the eyepiece

off. Set up the bi-occular eyepiece and screw its join ring.

TACTICAL DAY/NIGHT SYSTEM

• Place the Long rail to standard US weaver of the fire arm.

• Slightly loosen fixator screws of the Ultra Sight mount.

• Place the Long rail to standard US weaver of the fire arm.

• Tighten fixator screws of Ultra Sight.

• Place the Patriot into clamp of Quick release mount and tighten the screws of the clamp.

• Place the Quick release mount with Patriot on the Long rail behind the Ultra Sight.

• At the same time the Ultra Sight will be switched into the IR night mode automatically.

• Tighten fixator screws of the Quick release mount.

• For daytime use of the system loosen fixator screws of the Quick release mount and remove

the Quick release mount with Patriot from the Long rail.

Clamp

Quick

release

mount

Fixator

screws

Your

Patriot

Screws

Position for nighttime use

STORAGE AND CARE

If the device is not to be used for extended period of time (more than 10 days) remove the bat-

tery.

Avoid touching lenses. If fingerprints or traces of dirt or dust appear, clean surface with a

Photographic lens cleaning tissue.

Keep lens cap/daylight filter on when not in use.

The Patriot is not harmful to the user or the environment.

Do not disassemble except for cleaning the front lens, eyepiece, install the doubler or any

other “C” mount lens: it will void your warranty.

Evaluate the scope’s function by looking through it in a lit environment with the daylight filter

lens cap on. Never use in daylight without the daylight filter lens cap on.

Never point the PATRIOT at a bright light source.

Adverse atmospheric conditions, such as fog, smog, or haze, and a lack of ambient light

(moon or starlight) may diminish the effective viewing distance.

esdulcnI

ItoirtaP

,eceipeyemm03dnasnelmm03,epocStekcoP.neGts1

,eceipeyethgisnopaewneerGnodeR,esacyrractfos

egnaRgnoL,sneltnemele6mm09x4,sgnirgnitnuoM

,)eceiprefsnarT,partsnihchtiwtesdaeH(tiKelggoG,RI

redrocmaC/aremaC,relbuoDnoitacifingaMtnemele3

noitcurtsnI,esacdrahfoorpretawnacileP,retpada

yrettabmuihtiLA321RCenodnalaunaM

IItoirtaP

mm03dnasnelmm03,epocStekcoP.neGdn2

enodnalaunaMnoitcurtsnI,esacyrractfos,eceipeye

yrettabmuihtiLA321RC

IIItoirtaP

mm03dnasnelmm03htiwepocStekcoP.neGd3

enodnalaunaMnoitcurtsnI,esacyrractfos,eceipeye

yrettabmuihtiLA321RC

tiKnopaeW

,sgnirgnitnuoM,eceipeyethgisnopaewneerGnodeR

nacileP,RIegnaRgnoL,sneltnemele6mm09x4

esacdrahfoorpretaw

emerpuSehT

metsySecnallievruS

,)eceiprefsnarT,partsnihchtiwtesdaeH(tiKelggoG

noitacifingaMtnemele3,sneltnemele6mm09x4

,eceipeyErewophgiHmm51,relbuoD

,RIegnargnolrepuS,retpadaredrocmaC/aremaC

esacdrahfoorpretawnacileP

tiKetamitlUehT

,sgnirgnitnuoM,eceipeyethgisnopaewneerGnodeR

tiKelggoG,RIegnaRgnoL,sneltnemele6mm09x4

tnemele3,)eceiprefsnarT,partsnihchtiwtesdaeH(

,eceipeyErewophgiHmm51,relbuoDnoitacifingaM

drahfoorpretawnacileP,retpadaredrocmaC/aremaC

esac

tiKraluco-iB otnitoirtaPehtsnrut,snelmm09dnaeceipeyeraluco-iB

raluco-ibx5a

thgiN/yaDlacitcaT

1metsyS

mm09dna,tnuomesaelerkciuq,liargnoL,thgis-artlU

esaCdraH,RIegnargnol,snel

thgiN/yaDlacitcaT

2metsyS

nacileP,tnuomesaelerkciuqdna,liargnoL,thgis-artlU

esacdrahfoorpretaw

Part name

PATRIOT SPECIFICATIONS

Inhaltsverzeichnis

Andere ATN Monokular Handbücher

ATN

ATN NVG7-3I Bedienungsanleitung

ATN

ATN Voyager 2IA Bedienungsanleitung

ATN

ATN PS14-CGT Bedienungsanleitung

ATN

ATN OTS-HD Series Bedienungsanleitung

ATN

ATN NVM14 Bedienungsanleitung

ATN

ATN PS22-3A Bedienungsanleitung

ATN

ATN 6015-3 Bedienungsanleitung

ATN

ATN PS22-CGT Bedienungsanleitung

ATN

ATN PVS14-3 Bedienungsanleitung

ATN

ATN MO-4 Bedienungsanleitung

ATN

ATN 8x20 Silver Eye Bedienungsanleitung

ATN

ATN Night Storm 3 Bedienungsanleitung

ATN

ATN OTS 4T Series Bedienungsanleitung

ATN

ATN Multi Purpose Night Vision NVM 14-2 Bedienungsanleitung

ATN

ATN MO4-4 Bedienungsanleitung

ATN

ATN Night Storm 1 Bedienungsanleitung

ATN

ATN OTS-XLT 160 2-8x Bedienungsanleitung

ATN

ATN MO-4 Bedienungsanleitung

ATN

ATN Night Leopard Bedienungsanleitung

ATN

ATN PS14-3A Bedienungsanleitung

ATN

ATN Voyager 2I Bedienungsanleitung

ATN

ATN PS14-3 Bedienungsanleitung

ATN

ATN Night vision Monocular MO-4 Bedienungsanleitung

ATN

ATN PS-22 Bedienungsanleitung

Beliebte Monokular Handbücher anderer Marken

Zeiss

Zeiss Victory 8 x 26 T* PRF Bedienungsanleitung

Bushnell

Bushnell Equinox 260228 Bedienungsanleitung

Pulsar

Pulsar 71011 Bedienungsanleitung

PHOTONIS

PHOTONIS TacFusion Bedienungsanleitung

Opticron

Opticron Imagic IS Installationsanleitung

Night Vision

Night Vision NOXM50 Bedienungsanleitung

Leica

Leica Monovid 8x20 Bedienungsanleitung

StellaX

StellaX ZoomX X-003 Bedienungsanleitung

AGM

AGM ASP-MICRO TM160i Bedienungsanleitung

Zeiss

Zeiss DTI 6/20 Bedienungsanleitung

Dali

Dali S25 Series Bedienungsanleitung

Zhumell

Zhumell WATERPROOF ZOOM MONOCULAR 10-25X42 Bedienungsanleitung

Levenhuk

Levenhuk Fatum Z1000 Bedienungsanleitung

Vortex

Vortex Solo 36 mm Bedienungsanleitung

Bushnell

Bushnell 5 X 20 GOLF SCOPE Bedienungsanleitung

Bushnell

Bushnell Equinox Z 260130 Bedienungsanleitung

Night Owl

Night Owl Night Scope NOXM50-DG Bedienungsanleitung

Yukon

Yukon PHANTOM 26057T Montageanleitung