ATN ATN PS28 Bedienungsanleitung

operator’s manual

NIGHT VISION CLIP-ON

ATN PS28

Important Export Restrictions! Commodities, products,

technologies and services contained in this manual are

subject to one or more of the export control laws and

regulations of the U.S. Government and they fall under the

control jurisdiction of either the US Department of State

or the US BIS-Department of Commerce. It is unlawful

and strictly prohibited to export, or attempt to export or

otherwise transfer or sell any hardware or technical data

or furnish any service to any foreign person, whether

abroad or in the United States, for which a license or written

approval of the U.S. Government is required, without first

obtaining the required license or written approval from the

Department of the U.S. Government having jurisdiction.

Diversion contrary to U.S. law is prohibited.

ATN PS28 OPERATOR’S MANUAL (REV. 2, MAY, 2014)

www.atncorp.com/warranty

The information in this manual is furnished for information use only, is subject

to change without notice, cannot be construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccuracies

that may appear in this book.

THIS PRODUCT CONTAINS NATURAL RUBBER LATEX

WHICH MAY CAUSE ALLERGIC REACTIONS.

CAUTION:

SAFETY SUMMARY

CAUTIONS

• The ATN PS28 is a precision optical instrument and must be handled

carefully at all times to prevent damage.

• Do not scratch the external lens surfaces or touch them with your ﬁn-

gers.

• To protect the image intensiﬁer, keep the lens cap on the objective lens

when the sight is not in use or when checked out in daylight conditions.

• The IR illuminator is the light that is invisible to the unaided eye for use

during conditions of extreme darkness. However, the light from the illu-

minator can be detected by others when using night vision devices.

• If you use the rubber eyecaps for a long period of time, you may suffer

skin inﬂammation. If you develop any symptoms, consult a doctor imme-

diately.

WARNING

Do not carry batteries in pockets containing metal objects such as

coins, keys, etc. Metal objects can cause the batteries to short circuit

and become very hot.

WARNING

Toxic Material

The image intensiﬁer’s phosphor screen contains toxic materials.

• If an image intensiﬁer breaks, be extremely careful to avoid inhaling the

phosphor screen material. Do not allow the material to come in contact

with the mouth or open wounds on the skin.

• If the phosphor screen material contacts your skin, wash it off immedi-

ately with soap and water.

• If you inhale/swallow any phosphor screen material, drink a lot of water,

induce vomiting, and seek medical attention as soon as possible.

WARNING

Do not use contaminated light suppressor. They must be replaced.

EQUIPMENT LIMITATIONS

To avoid physical and equipment damage when using the

ATN PS28, carefully read and understand the following equip-

ment limitations.

• The equipment requires some night light (moonlight, starlight,

etc.) to operate. The level of equipment performance depends

upon the level of light.

• Night light reduces by passing through the clouds, while oper-

ating under trees, at building shadows, etc.

• The equipment is less effective when viewing into shadows

and other darkened areas.

• The equipment is less effective when viewing through the rain,

fog, sleet, snow or smoke.

• The equipment will not “see” through the dense smoke.

TABLE OF CONTENTS

pg.

SAFETY SUMMARY a

SECTION I. INTRODUCTION 1-1

1.1. General 1-2

1.1.1. Scope 1-2

1.1.2. Reports 1-2

1.1.3. Storage 1-2

1.1.4. Warranty 1-3

1.2. Description and Data 1-5

1.2.1. Description 1-5

1.2.2. Standard Components and Optional Equipment 1-8

SECTION II. OPERATING INSTRUCTIONS 2-1

2.1. Installation Procedures 2-2

2.1.1. Battery Installation 2-2

2.1.2. Installation on MIL-STD-1913 Rail 2-2

2.1.3. Attachment to Dayscope Objective Lens 2-4

2.1.4. Long Rail Adapter 2-5

2.1.5. B.A.M. System 2-6

2.1.6. Remote Control 2-8

2.1.7. IR450 Illuminator 2-9

2.1.8. Mounting Examples 2-11

2.2. Operating Procedures 2-11

2.2.1. General 2-11

2.2.2. Controls and Indicators 2-12

2.2.3. Operating Procedures 2-13

2.2.4. Operating with Remote Control 2-14

2.2.5. Operating with IR450 Illuminator 2-14

2.2.6. Preparation for Storage 2-14

SECTION III. MAINTENANCE INSTRUCTIONS 3-1

3.1. Preventive Maintenance Checks

and Services (PMCS) 3-2

3.1.1. Preventive Maintenance Checks And Services

Table 3-2

3.1.2. Inspection Criteria for Proper Image Intensifier

Operation 3-6

3.2. Troubleshooting 3-10

3.2.1. General 3-10

3.2.2. Troubleshooting Procedures 3-10

3.3. Maintenance Procedures 3-11

3.3.1. PS28 Maintenance 3-11

3.3.2. Cleaning Procedures 3-11

Appendix A. How to select Scope Mounting System A-1

Appendix B. Estimation of Ambient Illumination Level B-1

1-1

SECTION I

INTRODUCTION

1-2

1.1 GENERAL INFORMATION

1.1.1. SCOPE

This manual contains instructions for use in operating and main-

taining the ATN PS28 Night Vision Front Sights. Throughout this

manual, the ATN PS28 will be referred to as the sights or the PS28.

1.1.2. REPORTS

Reports from the user on recommendations for improvements are

encouraged. Send reports to the address below.

American Technologies Network Corp.

1341 San Mateo Avenue

South San Francisco, CA 94080

(800) 910-2862

(650) 989-5100

(650) 875-0129 fax

www.atncorp.com

info@atncorp.com

1.1.3. STORAGE

Storage of the PS28 should be done in the factory packing and

after a thorough PMCS as outlined in Section IV of this manual.

This will ensure the sight remains in mission ready condition dur-

ing storage. Battery should be stored separately from the sight.

The PS28 should not be placed on the floor, in any area exposed

to high temperatures or direct sunlight. Presence of acid and al-

kaline vapor, as well as of other aggressive admixtures in the air

is unacceptable.

1-3

1.1.4. WARRANTY

2 YEAR PRODUCT WARRANTY

This product is guaranteed to be free from manufacturing defects in

material and workmanship under normal use for a period of 2 (two)

years from the date of purchase. In the event a defect that is covered

by the foregoing warranty occurs during the applicable period stated

above, ATN, at its option, will either repair or replace the product, and

such action on the part of ATN shall be the full extent of ATN’s liability,

and the Customer’s sole and exclusive remedy. This warranty does not

cover a product (a) used in other than its normal and customary man-

ner; (b) subjected to misuse; (c) subjected to alterations, modifications

or repairs by the Customer of by any party other than ATN without prior

written consent of ATN; (d) special order or “close-out” merchandise or

merchandise sold “as-is” by either ATN or the ATN dealer; or (e) mer-

chandise that has been discontinued by the manufacturer and either

parts or replacement units are not available due to reasons beyond the

control of ATN. ATN shall not be responsible for any defects or damage

that in ATN’s opinion is a result from the mishandling, abuse, misuse,

improper storage or improper operation, including use in conjunction

with equipment which is electrically or mechanically incompatible with

or of inferior quality to the product, as well as failure to maintain the

environmental conditions specified by the manufacturer. CUSTOMER

IS HEREBY NOTIFIED THAT OPERATION OF THE EQUIPMENT

DURING DAYLIGHT HOURS OR UNDER ANY EXCESSIVE LIGHT

CONDITIONS MAY PERMANENTLY DAMAGE THE INTERNAL

COMPONENTS OF THE UNIT AND SAID DAMAGE WILL NOT BE

COVERED UNDER THIS WARRANTY. This warranty is extended only

to the original purchaser. Any breach of this warranty shall be waived

unless the customer notifies ATN at the address noted below within the

applicable warranty period.

The customer understands and agrees that except for the foregoing

warranty, no other warranties written or oral, statutory, expressed or

implied, including any implied warranty of merchantability or fitness for

a particular purpose, shall apply to the product. All such implied warran-

ties are hereby and expressly disclaimed.

LIMITATION OF LIABILITY

ATN will not be liable for any claims, actions, suits, proceedings, costs,

expenses, damages or liabilities arising out of the use of this product.

Operation and use of the product are the sole responsibility of the Cus-

tomer. ATN’s sole undertaking is limited to providing the products and

services outlined herein in accordance with the terms and conditions of

this Agreement. The provision of products sold and services performed

by ATN to the Customer shall not be interpreted, construed, or regard-

ed, either expressly or implied, as being for the benefit of or creating

1-4

any obligation toward any third party of legal entity outside ATN and the

Customer; ATN’s obligations under this Agreement extend solely to the

Customer.

ATN’s liability hereunder for damages, regardless of the form or action,

shall not exceed the fees or other charges paid to ATN by the customer

or customer’s dealer. ATN shall not, in any event, be liable for special,

indirect, incidental, or consequential damages, including, but not limited

to, lost income, lost revenue, or lost profit, whether such damages were

foreseeable or not at the time of purchase, and whether or not such

damages arise out of a breach of warranty, a breach of agreement, neg-

ligence, strict liability or any other theory of liability.

PRODUCT WARRANTY REGISTRATION

In order to validate the warranty on your product, ATN must receive a

completed Product Warranty Registration Card for each unit or com-

plete warranty registration on our website at www.atncorp.com. Please

complete the included form and immediately mail it to our Service Cen-

ter: ATN Corporation, 1341 San Mateo Avenue, South San Francisco,

CA 94080.

OBTAINING WARRANTY SERVICE

To obtain warranty service on your unit, End-user must notify ATN ser-

vice department by calling 800-910-2862 or 650-989-5100 or via e-mail

service@atncorp.com to receive a Return Merchandise Authorization

number (RMA).

When returning please take or send the product, postage paid, with a

copy of your sales receipt to our service center, ATN Corporation at the

address noted above. All merchandise must be fully insured with the

correct postage; ATN will not be responsible for improper postage or,

missing or damaged merchandise during shipment.

When sending product back, please clearly mark the RMA# on the

outside of the shipping box. Please include a letter that indicates your

RMA#, Name, Return Address, reason for service return, Contact in-

formation such as valid telephone numbers and/or e-mail address and

proof of purchases that will help us to establish the valid start date of the

warranty. Product merchandise returns that do not have an RMA listed

may be refused or a significant delay in processing may occur.

Estimated Warranty service time is 10-20 business days. End-user/cus-

tomer is responsible for postage to ATN for warranty service. ATN will

cover return postage/shipping to continental USA end-users/customers

after warranty repair only if product is covered by aforementioned war-

ranty. ATN will return product after warranty service by domestic ground

service and/or domestic mail. Any other requested, required or interna-

tional shipping method the postage/shipping fee will be the responsibil-

ity of the end-user/customer.

Inhaltsverzeichnis

Andere ATN Zielfernrohr Handbücher

ATN

ATN ThOR 3 B&W Bedienungsanleitung

ATN

ATN Mars 2 Bedienungsanleitung

ATN

ATN Daytime Series Bedienungsanleitung

ATN

ATN Daytime 3-9x55LU Bedienungsanleitung

ATN

ATN 330 Bedienungsanleitung

ATN

ATN 10x65Z-Army Mil-Dot Bedienungsanleitung

ATN

ATN ATN MArs x4 Bedienungsanleitung

ATN

ATN Aries MK 6650 Bedienungsanleitung

ATN

ATN Aries 330 “Warrior” Bedienungsanleitung

ATN

ATN ThOR-HD 384 2 - 8x Bedienungsanleitung

ATN

ATN Daytime 5x33L Bedienungsanleitung

ATN

ATN nIGHT aRROW 6 Bedienungsanleitung

ATN

ATN MARS6-21A Bedienungsanleitung

ATN

ATN Aries MK 6600 Bedienungsanleitung

ATN

ATN nIGHT aRROW 4 Bedienungsanleitung

ATN

ATN NVSG1 Bedienungsanleitung

ATN

ATN Night Arrow 2 Bedienungsanleitung

ATN

ATN MARS4-4 Bedienungsanleitung

ATN

ATN MARS6-3N Bedienungsanleitung

ATN

ATN Digital Ultra Sight Bedienungsanleitung

ATN

ATN 4-12x80 DNS Bedienungsanleitung

ATN

ATN PS40-3P Bedienungsanleitung

ATN

ATN Trident Pro2x-2 Bedienungsanleitung

ATN

ATN Mars4x-3 Bedienungsanleitung

Beliebte Zielfernrohr Handbücher anderer Marken

Leupold

Leupold Hunting Equipment Benutzerhandbuch

Newcon Optik

Newcon Optik DN482 Bedienungsanleitung

Bushnell

Bushnell ET3124F Bedienungsanleitung

Newcon Optik

Newcon Optik NVS-33 Bedienungsanleitung

Nikon

Nikon 8442 - Omega Muzzleloader Scope 1.65-5x36 Bedienungsanleitung

Pulsar

Pulsar Trail Series Bedienungsanleitung

FLIR

FLIR ThermoSight T50 Bedienungsanleitung

Pulsar

Pulsar Digisight Ultra N450 Bedienungsanleitung

Nikon

Nikon 1.65-5x36 Bedienungsanleitung

Nikon

Nikon OMEGA Muzzleloading 3-9x40 Bedienungsanleitung

Zeiss

Zeiss Classic Diatal T Series Bedienungsanleitung

Nikon

Nikon 4-16x50SF - Monarch Riflescope - BDC Bedienungsanleitung

COT

COT NM-108 BC Bedienungsanleitung

Nikon

Nikon 4-16x42SF - Monarch Riflescope Bedienungsanleitung

Minox

Minox ZP5 3-15x50 Bedienungsanleitung

Bushnell

Bushnell 20-4124 Bedienungsanleitung

StreamLight

StreamLight STINGER 700025 Bedienungsanleitung

Bushnell

Bushnell 71-3946 Bedienungsanleitung