© 2012 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
STEP 5:
Peel the backing off A3 Felt Pad and attach to A1 Striker as shown in FIGURE 5.
FIGURE 5
A3
A1
Congratulations! You have now assembled your Atomic Hockey Table. Please note the
instructions below to ensure many years of trouble free use of your Atomic Hockey Table.
CARE AND USE OF YOUR ATOMIC HOCKEY TABLE
1. Use only a suitable 120v AC household outlet, and insure the cord is not a
trip hazard.
2. Spray furniture polish is recommended to both protect the play field and
increase the puck speed. Apply and wipe off with the air motor on.
3. Use a carpenters level to properly level table using the leg levelers.
4. This product is intended for INDOOR use only.
5. DO NOT operate the motor if the cord is damaged in any way.
6. DO NOT sit, climb or lean on the table.
7. DO NOT drag the table when moving it. This will damage the legs.
8. DO NOT lift and move the table using the CORNERS as this may
damage them.
9. DO NOT set drinks on the table.
10. It is suggested that this table be placed close to a wall thus allowing the
air motor cord to NOT be a trip hazard. Always turn air motor off when
table is not in use.
HOCKEY GAME RULES:
1. This game is designed to be played with two (2) players, one at each end, or with four (4) players, two at each
end of the game table.
2. Flip a coin to determine who will begin play, or a face-off can be held at the center of the table.
3. Play begins when the puck is placed on the playing surface. Players must hit the puck with the strikers and
attempt to shoot into the opponent’s goal.
4. One point is awarded when a puck is shot into the opponent’s goal.
5. Winning the game: the winning score is accomplished by being the first player to reach a predetermined score
or by being the player to score the most points within a given period of time.
NOTE: A3 Felt Pads may
already be attached to
A1 Strikers.
