Atronic E-motion Bedienungsanleitung

October 2008

Atronic e-motion™

Installation Manual

Rev. 2.3

e-motion™ Installation Manual

Release Info1.

Atronic e-motion™

Installation Manual

Rev. 2.3

October 2008

WARNING!

The e-motion™ / Hi(!)bility™ manual is intended to provide QUALIFIED TECHNICAL PERSONNEL ONLY

with the information necessary to routinely maintain, service, and repair the Atronic e-motion cabinet

and components. To avoid personal injury or damage to the equipment, do not perform any serviceing

other than that contained in this manual.

No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval

system, or translated into any human or computer language, in any form or by any means, electronic,

mechanical, magnetic, manual, or otherwise, or disclosed to third parties without the express written

permission obtained from a properly authorized ocial of Atronic.

DISCLAIMER

Atronic makes no representation or warranties, express or implied, with respect to this publication, or

any product of Atronic, including but not limited to warranties of merchantability or tness for any par-

ticular purpose. Atronic reserves the right to make changes, enhancements, revisions and alterations of

any kind to this publication or the product(s) it covers without obligation to notify any person, institu-

tion or organization of such changes, enhancements, revisions and alterations.

TRADEMARKS

This document may contain trademarks of Atronic. All other brand and product names are trademarks

or registered trademarks of their respective companies.

e-motion™ Installation Manual

Table of Contents

1. Release Info .................................................................................................................. 2

2. About this Manual..................................................................................................... 4

2.1 Scope.................................................................................................................. 4

2.2 Target Audience.............................................................................................. 4

2.3 Included Software Releases ....................................................................... 4

2.4 Related Publications ..................................................................................... 5

3. Safety Instructions.................................................................................................... 6

4. Machine Components.............................................................................................. 8

4.1 Closed Cabinet................................................................................................ 8

4.2 Opened Cabinet ............................................................................................. 9

4.3 Logic Box.........................................................................................................10

5. Dimensions.................................................................................................................11

6. Technical Data ...........................................................................................................12

7. Machine Installation ..............................................................................................13

7.1 Overview.........................................................................................................13

7.2 Machine Mounting......................................................................................14

7.3 Replace Shipping Locks.............................................................................15

7.4 Prepare Coin Acceptor (CC-16 / MC-16)...............................................16

7.5 Prepare Hopper ............................................................................................16

7.6 Check cables and connectors..................................................................16

7.7 Check Commboard Settings....................................................................16

7.8 Apply Power...................................................................................................17

8. Basic Setup..................................................................................................................18

9. Tests................................................................................................................................19

9.1 Test Bill and Coin Handling.......................................................................19

10. Technical Support Telephone numbers......................................................20

11. Drilling Template...................................................................................................21

e-motion™ Installation Manual

2. About this Manual

About this Manual2.

Scope2.1

This Installation Manual describes how to install an Atronic e-

motion™ gaming machines.

It describes how to mount the machine to a base stand and

relevant procedures to be carried out before the machine can

be put into operation. Further it contains important safety in-

structions, technical data and cabinet drawings.

Target Audience2.2

We address qualied technical personnel, who are involved in

installation, setup and conguration of Atronic gaming ma-

chines. With this user group we assume that they are basically

familiar with gaming machines and casino related terminol-

ogy.

Please read this document and the contained safety notes

carefully before you start machine installation.

Included Software Releases2.3

The installation procedures described in this manual do not

relate to a certain software version. However the graphs in-

cluded are taken from a C-Level software releases (C5.1.x.x).

Other software version may support dierent features and op-

tions.

e-motion™ Installation Manual

Related Publications2.4

More detailed information about Atronic e-motion™ gaming

machines may be found in the following publications:

Software Manuals

Manual HI Software (B1.2.x STD)•

Manual HI Software (C4.x.x.x STD)•

Manual HI Software (C5.x.x.x STD)•

Operation Manuals

Manual EMC HI Operating (B1.2.x STD)•

Manual EMC HI Operating (C4.x.x.x STD)•

Manual EMC HI Operating (C5.x.x.x STD)•

Spare Parts

Manual EMC Parts Catalogue•

Linked Gaming Products

Manual [ product ] - Setup and Conguaration•

for a particular linked gaming product, such as CASH FEVER™,

King Kong Cash, The Game of Life™, Mystery Magic™, Hot

Link™, etc.

Peripherals

(Coin- and bill acceptors, hopper, printer, etc.)

See folder “Peripherals” on the Atronic Service Manual CD.

Note: All mentioned manuals can be found on a CD-ROM titled

“Atronic Service Manual 2008” or www.atronic.com*

If this manual did not came with this CD-ROM, please ask Atronic

Technical Service for a free copy of the latest revision.

* to gain access an active Gamebook account is necessary.

2. About this Manual

e-motion™ Installation Manual

3. Safety Instructions

Safety Instructions3.

Note!

This installation module of the e-motion™ Hi(!)bility includes

only information relating to the installation of the e-motion™

cabinet. For other machine or cabinet types please refer to the

relevant manuals.

Follow the safety instructions below and on

the next page, to ensure safe operation.

Caution! High Voltage

Power cable must be disconnected from the main power

socket, so that the machine is free from electrical current. The

power switch is intended for service purposes only.

Caution! Tipping Hazard

The machine must be fastened to an appropriate base, to pre-

vent tipping over. Use the Atronic Installation Station (AIS) for

machine mounting.

-> see also section 7 Machine Installation

Caution! Moving Parts

Make sure to disconnect the hopper, when working on it.

Caution! Machine Cleaning

The machine must not be cleaned using a high pressure clean-

er or a vapor jet and must not be installed or operated in areas

where high pressure cleaners or vapor jets are used. Use in dry

conditions only.

Continues on next page

e-motion™ Installation Manual

Further safety precautions during Installation, Service

and Maintenance

The machine weight is approx. 120kg. Always use appro-•

piate equipment for transportation.

Disconnect the power cable from the socket, before work-•

ing at the machine.

The machine may only be operated in• dry conditions and

must be connected to a grounded mains power socket.

Check that all connectors are seated correctly. False con-•

nections can cause irreparable damage, not covered by

warranty.

For power cable routing remove the knock-out plate on the•

appropriate side of the cabinet. Edge-protection must be

mounted once the knock-out plate has been removed.

Only qualied service personnel should perform repairs.•

Electronic assemblies should only be changed with the•

power switched o.

Use only original Atronic parts for replacement.•

Atronic commboard and mainboard•

Danger of explosion if battery is incorrectly replaced!

Check for correct polarity and replace with the same or

equivalent type only!

The machine must not be cleaned using a high pressure•

cleaner or a vapor jet and must not be installed or oper-

ated in areas where high pressure cleaners or vapor jets

are used. Use in dry conditions only.

Please refer to relevant Atronic service manuals for further•

instructions on setup, operation and maintenance.

3. Safety Instructions

e-motion™ Installation Manual

Machine Components4.

Closed Cabinet4.1

Toplights

Top Glass

Online System Module

(optional)

Voucher Printer

(optional)

Coin Entry

Coin Decal

Functional Button Panel

Mechanical Meters

Main Door Lock

Jackpot Key Switch

Audit Key Switch

Hopper Drawer Lock

Bill Entry/Bill Acceptor

Name Plate

Atronic Installation

Station (AIS)

(Baseplate for mounting)

Speakers

Framelights

Upper Display

Main Display

Playfield Height

Adjustment

Button Panel

Hopper Drawer

Coin Bowl

Bill Decal

4. Machine Components

e-motion™ Installation Manual

Opened Cabinet4.2

Logicbox

Logic Door

Logic Door Lock

Reset Button

Service Button

Multimedia Board

Cover

Maindoor Switch

Coin Unit

Assembly

Coin Acceptor

Coin Optics

Bill Acceptor

Front Bezel

Cashbox

Bill Acceptor

Filterboard

Signal

Filterboard

Power

Top Glass

Release Lever

PowerSwitch

(auxiliary)

AC Output

Power Supply

Door Motor

Decal Lighting

Button Panel

Release Lever

4. Machine Components

e-motion™ Installation Manual

Logic Box4.3

Logicbox Switch

Backplane

Commboard

Mainboard

DVD-ROM Drive

Graphic Card

(VP11)

Release Lever for

Multimediaboard

Cover

Multimediaboard

Cover

4. Machine Components

Andere Handbücher für e-motion

Inhaltsverzeichnis

Andere Atronic Videospielzubehör Handbücher

Atronic

Atronic Cashline Bedienungsanleitung

Beliebte Videospielzubehör Handbücher anderer Marken

VENOM

VENOM VS3057 Bedienungsanleitung

LINK-MI

LINK-MI HDVC01 Bedienungsanleitung

Thrustmaster

Thrustmaster T60 Bedienungsanleitung

Avermedia

Avermedia C875 Bedienungsanleitung

VENOM

VENOM VS2728 Bedienungsanleitung

DGT

DGT 960 Bedienungsanleitung

Sega

Sega Visual Memory Unit Bedienungsanleitung

Datel

Datel Go-tcha Expedition Bedienungsanleitung

TruGolf

TruGolf TruFlight 2 Bedienungsanleitung

CH Products

CH Products CH PRO THROTTLE Bedienungsanleitung

Thrustmaster

Thrustmaster T2PA Bedienungsanleitung

Cube Controls

Cube Controls Mercedes-AMG - GT Edition SIM Wheel Bedienungsanleitung

Hoffmann

Hoffmann Club Pro Bedienungsanleitung

ardistel

ardistel ADT SpeedRacer Bedienungsanleitung

Sven

Sven GC-W150 Bedienungsanleitung

Deltaco Gaming

Deltaco Gaming GAM-131 Bedienungsanleitung

Huffy

Huffy M731324 Bedienungsanleitung

Ace Bayou

Ace Bayou X Rocker Bedienungsanleitung

Atronic e-motion Bedienungsanleitung

Beliebte Videospielzubehör Handbücher anderer Marken