Page 8 09/2021
User Manual Wallbox home, home plus,
home plus with charging socket and business
Environment
■ EV Charging station should be installed on the incombustible such as metal;
otherwise, hazardous re may result.
■ EV Charging station should not be installed in the area that contains
explosive gas. Otherwise, hazardous blast may result.
■ Leave no inammable or explosive substances near the EV Charging station.
Otherwise, hazardous blast may result.
■ EV Charging station should be installed in a place with no conductive dust
and insulation-destructive gas or vapour.
■ EV Charging station should be installed in a place with no violent vibration
and impact. For good ventilation, mount the charging station vertically.
■ The installation foundation shall be higher than the ground level, and
drainage ditch shall be set around the EV Charging station, otherwise the
equipment may be damaged
2.3 Installation
■ Safety protection must be done when installing the EV Charging station.
■ Installation and wiring has to be done by personnel with professional
qualication. Otherwise, hazardous electric shock may result
■ Make sure input power supply is entirely disconnected before wiring.
Otherwise, hazardous electric shock may result.
■ Earth terminal of the EV Charging station must be grounded securely.
Otherwise, hazardous electric shock may result.
■ The lead nose of the charging station must be securely attached or there is
a risk of damaging the equipment.
■ Leave no metals such as bolts, gaskets into the inside of the EV Charging
station. Otherwise, hazardous blast and re may result
■ Main loop terminal of the EV Charging station should be rmly connected
with the wiring ends. Otherwise, damage to property may result.
■ Bare parts of wiring ends of electrical cables must be wrapped with
insulating tape. Otherwise, hazardous re and property loss may result.
