ATTO Technology FastStream SC 5500E Bedienungsanleitung

ATTO FastStream

Embedded Storage Controller

Installation and Operation Manual

Fibre Channel to SAS/SATA Models

SC 5500E

SC 7500E

SC 8500E

ATTO Technology, Inc.

155 CrossPoint Parkway

Amherst, New York 14068 USA

www.attotech.com

Tel (716) 691-1999

Fax (716) 691-9353

Sales support: [email protected]

Technical support: Monday -- Friday, 8am-8pm EST

[email protected]

holders. No part of this manual may be reproduced in any form or by any means without the express written

permission of ATTO Technology, Inc.

1/2009 PRMA-0395-000

Contents

1.0 ATTO FastStream Offers Data Protection ...................................................1

Technical features

System memory

Expansion slot

RAID protection features

Audio/video features

1.1 ATTO FastStream Embedded Components .....................................2

Board dimensions

Temperature

Humidity

Altitude

ESD

Real Time Clock

Power supply requirements

SAS/SATA ports

Fibre Channel ports

Management ports

Manual reset switch

LED

1.2 ATTO Celerity FC42-ES Host Adapter ...............................................4

Hardware specifications

Advanced FC capabilities

Host bus specifications

External connectivity

1.3 ATTO Celerity FC44-ES Host Adapter ...............................................6

Hardware specifications

Advanced FC capabilities

Host bus specifications

External connectivity

1.4 ATTO Celerity FC84-EN Host Adapter ...............................................8

Technical specifications

Advanced FC capabilities

Host bus specifications

Environmental & physical specifications

External connectivity

Software specifications

2.0 Install the FastStream ....................................................................................10

Unpacking the packing box; verifying contents

Installing the FastStream

Discovering the IP address

Setting up Internet Explorer

Beginning initial configuration

3.0 Ensure Drive Integrity ....................................................................................14

Before creating RAID groups

After creating RAID groups

4.0 Configure Storage into RAID Groups ..........................................................16

Features you may choose

Auto-Rebuild

Fault Tolerance

Initialization

Selecting an application

Preliminary steps

Quick Digital Video

Audio

General Digital Video, General IT or Database

Creating a custom setup

5.0 Modify System Values ...................................................................................21

Changing current user name, password

Creating a read-only user name, password

Changing system variables

6.0 Monitor Storage, Configurations ..................................................................23

Health and Status Monitor page

Configuration Display page

SCSI Enclosure Services (SES)

6.1 Remote System Monitoring ................................................................25

Types of errors

Warning messages

Message severity levels

Email notification

6.2 Drive Diagnostics ................................................................................27

Preliminary steps

Read-only Drive Test

Drive performance and health

Identifying a drive attached to the FastStream

6.3 SCSI Enclosure Services (SES) .........................................................29

Setting up SES

Identifying SES elements

Monitoring SES elements

Use the Health and Status Monitor

Use the Manage menu

7.0 Modify Storage ...............................................................................................34

Preliminary steps

RAID group processes

Creating RAID groups

Deleting RAID groups

Adding drives to a RAID group

Adding mirrors to a RAID configuration

Changing RAID configuration: RAID migration

Modifying RAID group mapping

Modifying RAID group partitions

Rebuilding RAID groups

Modifying RAID options

FastStream process: adding or removing Hot Spares

Removing RAID configuration data

Advanced CLI page

8.0 Manage ATTO Devices, Configurations .......................................................39

Creating a unique name for your FastStream

Discovering, managing other ATTO devices

Saving or restoring a configuration

9.0 Interface Options ...........................................................................................41

Using the ExpressNAV Storage Manager

Using the serial port

Using Telnet

10.0 Update Firmware ..........................................................................................43

Appendix A CLI Provides an ASCII-based Interface ..........................................i

CLI error messages

CLI summary

CLI command explanations

Appendix B Design RAID Groups .......................................................................xvii

JBOD: Just a Bunch of Disks

DVRAID: Digital Video RAID

RAID Level 0: striping, no redundancy

RAID Level 1: mirroring (duplicate drives)

RAID Level 1 plus additional mirroring

RAID Level 1+0: striping, mirror spans two drives

RAID Level 4: striping, one parity drive

RAID Level 5: striping, parity distributed among drives

RAID Level 6: striping, two parity blocks distributed among drives

Appendix C Multipathing ......................................................................................xxi

Setup of the FastStream with Multipathing

Improved Availability of Storage with improved performance

Load Balancing algorithms for OS X and Windows DSM MPIO

Appendix D Standards and Compliances ...........................................................xxii

FCC Standards: Radio and Television Interference

Canadian Standards

European Standards

Declaration of Conformity

Appendix E Warranty ............................................................................................xxiii

Appendix F Reference Charts ..............................................................................xxiv

Generated frequencies

Data rate in cables

Connector pinouts

ATX 24-pin power connector pinouts (J1)

RJ-11 connection pinouts (J3)

Internal SAS 4i connector pinouts (J9)

RJ-45 connector pinouts (J2)

Internal SAS 4i connector pinouts (J11)

Jumpers pinouts

ATX power switch header pinouts (P3)

ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual

1.0 ATTO FastStream Offers Data Protection

The ATTO FastStream SC 5500E, 7500E and 8500E provide blazing-fast performance and RAID protection in an

embeddable ATX form factor.

With 4 Gigabit per second (Gb/sec.) Fibre Channel

host connections and 3 Gb/sec. SAS drive

connections, the ATTO FastStream provides

unprecedentedflexibilitywhileadding RAIDprotection

without compromising performance.

ATTO FastStream Embeddable Storage Controllers

arehighperformanceRAIDstoragedeviceswhichcan

be seamlessly integrated into an ATX enclosure.

ATTO FastStream FC to SAS RAID controllers are

ideally suited for bandwidth intensive applications

such as digital film, videoand audio as well as medical

imaging, digital prepress and disk to disk backup.

While RAID improves data accessibility and reliability

during normal operations, you still need a good

backup strategy for long-term protection of your data.

Technical features

• MicroATX form factor: conforms to industry-

standard MicroATX form factor specification for

board size, board mounting locations and

expansion slot placement.

• Intel 81348 processor

• 8 independent SAS/SATA ports

• SC 7500 supports up to 128 disk drives

• SC 5500 supports up to 64 disk drives

• Internal wide-SAS Small Form Factor (SFF)

8484 connectors

• Optional external (x4) miniSAS SFF8080

connector for JBOD expansion

• SES (SCSI Enclosure Services)

• RS-232 management port with a back panel

accessible RJ11 interface

• 10/100/1000 Megabits per second (Mb/sec.)

Ethernet management port with an RJ45

connector and integrated LEDs

• 8 MB Flash

• LED status for link and speed

• Manual reset switch to reboot the Storage

Controller

• Battery-backed event log asynchronous SRAM

• System monitoring hardware

• Real time clock

• SCSI Enclosure Services (SES)

System memory

• One 240-pin DDR2 SDRAM DIMM connector

• Supports512MBofunbuffered,ECCDDR2-533

SDRAM DIMM

• Qualified DIMM: Kingston Technology

KVR533D2E4/512; RoHS compliant

Expansion slot

• One PCIe expansion slot, x8 electrical and

mechanical widths aligned with expansion slot 7

of the standard ATX form factor

• Conforms to the PCIe Base 1.0a and CEM

specifications

• Accepts either a 2- or 4-port 4 or 8-Gb Celerity

PCIe Host Adapter as the host port interface

• Host adapter is oriented perpendicular to the

FastStream SC board and can be mounted

parallel with a 90

angle adapter

RAID protection features

• Hardware DVRAID, RAID Level 0, 1, 4, 5, 6,1+0

and JBOD, all user configurable

• N-way mirroring

• Global Hot Spares to ensure continuous

operation if a drive fails. The Hot Spare

automatically comes on-line and rebuild starts if

a disk failure is detected

• Automatic rebuild of RAID groups and

changeable Rebuild Priority keep the system

operational if a drive fails

• Support for large LBAs (64-bit operating

systems), partitions, partial data transfer to

improve performance and minimizes memory

use, and spanning

Audio/video features

• DVRAID provides performance for up to 22

streams of SD video or 6 streams of 10-bit

uncompressed HD video.

• Support for video on demand

• Support for multiple streams of audio

1.1 ATTO FastStream Embedded Components

TheATTOFastStreamFibre ChanneltoSAS/SATA RAIDcontroller linecan beseamlesslyintegrated intoan ATX

or custom storage enclosure.

ATTO FastStream SC RAID controllers support next-

generation media and are equipped to handle the

throughputs needed by advanced disk technologies.

For installation instructions, refer to

Install the

FastStream

on page 10.

Board dimensions

The FastStream SC embedded storage controllers

feature MicroATX-size printed circuit boards (PCB).

The boards can be used in enclosures that have

adequate clearance for the DIMM socket and

allowance for connecting to internal connectors.

Width:

7.0 in. ± 0.005 in. (17.78 cm ±0.01 cm)

Length:

9.6 in. ± 0.005 in. (24.38 cm ±0.01 cm)

Height:

1.3 in. ± 0.005 in. (3.3 cm ±0.01 cm)

Temperature

Non-operating:

-40 ºC to +70 ºC

Operating:

+5 ºC to +40 ºC

Humidity

Non-operating:

5% to 95% non-condensing

Operating:

10% to 90% non-condensing

Altitude

Non-operating:

50,000 feet (15,240 meters)

Operating:

10,000 feet (3048 meters)

ESD

Contact discharge:

Up to ±8kV no errors

Air discharge:

Up to ±15kV no errors

Real Time Clock

The Real Time Clock uses an M41T0 from ST

Microelectronics. The contents are maintained

regardlessofpowercycles.Arechargeable3VLithium

ion battery provides up to 90 days of backup power.

The charger is integrated on the circuit board. The

Lithium ion battery may explode if mistreated.

WARNING

To prevent shorting, premature failure or

damage to the battery, do not place the

board on a conductive surface such as

metal, black conductive foam or the

outside surface of a metallized ESD

protective pouch with your local

environmental regulations.

Explosionsgefahr, wenn die Batterie falsch

entfernt und/oder ersetzt wird. Entsorgen

Siebenutzte Batterien inÜbereinstimmung

mit Ihren lokalen

Umweltschutzbestimmungen.

Power supply requirements

A stable power source is necessary for proper and

reliable operation. The FastStream is compatible with

ATX power supplies with a 24-pin ATX connector and

requires +12V, (±10%) 6A for proper operation.

SAS/SATA ports

The eight independent

SAS/SATA ports use

internal wide-SAS Small

Form Factor (SFF) 8484

connectors to connect to

either SAS or SATA

devices.

Fibre Channel ports

SC 7500 and 8500:

four independent Fibre Channel

ports connect to Fibre Channel hosts.

SC 5500:

two independent 4-Gigabit Fibre Channel

ports to connect to Fibre Channel hosts.

All models use optical SFP connectors and multimode

fiber optic cable.

Make sure all cables are anchored securely at both

ends with the proper connectors.

ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual

Management ports

Management is provided using eitherthe 10/100/1000

Megabits per second (Mb/sec.) base T Ethernet port

accessible from the RJ-45 connector or the RS-232

management port with a back panel accessible RJ-11

interface.

Manual reset switch

A manual reset switch reboots the storage controller.

To reset the FastStream, depress the reset button for

no more than three seconds.

To restore factory defaults, press the reset button for

more than four seconds until the green Ready LED

blinks.

LED

A bicolor LED on the back panel shows unit status:

when green, the unit is in the Ready condition and is

fully operational; if it is lit yellow, a fault has been

detected and you should begin troubleshooting

procedures.

Exhibit 1.1-1 FastStream SC main board layout.

1.2 ATTO Celerity FC42-ES Host Adapter

The ATTO FastStream SC 5500E uses the Celerity FC-42ES PCI Express Interconnect and 4-Gigabit Fibre

Channel to provide performance of up to 650 MB/sec.

The Celerity FC-42ES is a dual-channel host adapter

supports high-definition video, rich content databases

and other high bandwidth environments.

The FC-42ES uses PCI Express, a serial, high-speed

connectionthat supportsaggregatethroughputupto 4

GB/sec. (x8 PCIe) full-duplex.

Hardware specifications

• 2 independent Fibre Channel ports

• 4-Gigabit data transfer rates per channel

• Supports all FC topologies: direct fabric,

arbitrated loop and point-to-point

• ANSI Fibre Channel: FC-PH, FC-AL, FC-AL2,

FC-FCP, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 8 @ 512 Bytes; 8 @ 2 Kilobytes

Advanced FC capabilities

• Supports SNIA HBA API

• On-demand automatic negotiation among 4-Gb,

2-Gb and 1-Gb Fibre Channel

• Supports Windows FDMI and WMI

• Supports exclusive ATTO Advanced Data

Streaming (ADS) Technology

Host bus specifications

• x4 mechanical and x4 electrical PCI Express

interconnect (RoHS compliant)

• Conforms to PCI Express Base Spec 1.0a

• Conforms to PCI Express CEM Spec 1.0a

• PCI Express to PCI/PCI-X Bridge spec 1.0

External connectivity

• Easy-to-install full height connection plate

• External LEDs for on-line and speed status for

each channel

• 2 pluggable optical LC SFP transceivers

included

Exhibit 1.2-1 Celerity FC-42ES Adapter bracket detail.

ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual

Exhibit 1.2-2 Celerity FC-42ES board layout.

Exhibit 1.2-3 Celerity FC-42ES.

Andere Handbücher für FastStream SC 5500E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATTO Technology Lagerung Handbücher

ATTO Technology

ATTO Technology FastStream SC 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FibreBridge 7500 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream VT 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 7500 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream NDMP 4600 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5700 Bedienungsanleitung

ATTO Technology

ATTO Technology FibreBridge 2300D Bedienungsanleitung

ATTO Technology

ATTO Technology Diamond Array V Bedienungsanleitung

ATTO Technology

ATTO Technology FibreBridge 2300D Bedienungsanleitung

ATTO Technology

ATTO Technology iPBridge 2500D Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5500 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FibreBridge 6500 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream VT 5700 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5700 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5300 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5500 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 7500 Handbuch

ATTO Technology

ATTO Technology FastStream SC 5300 Betriebsanleitung

ATTO Technology

ATTO Technology iPBridge 2700D Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5700 Bedienungsanleitung

ATTO Technology

ATTO Technology FastStream SC 5300 Kurzanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung