ATZ HDMI-V2-44B Bedienungsanleitung

pg. 1 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

1. Introduction

The HDMI 4x4 matrix switcher features four HDMI inputs and four HDMI outputs. It provides true matrix

routing for HDMI signals. It supports the transmission of video (resolutions up to 2160p@60Hz Ultra HD

4:4:4) and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby

Digital Plus and DTS-HD Master Audio. It works with Blue-Ray players, Set-Top boxes, Home Theater PCs,

and game consoles. Any source is accessible at all times by any display by selecting it via the supplied IR

Remote Control, RS-232, TCP/IP or the selection buttons on the front panel. This device supports all

HDMI 3D formats.

2. Features

HDMI2.0, HDCP2.2/HDCP1.4 compliant

Support video format up to 4k2k@60Hz with 24bit RGB/YCbCr 4:4:4/YCbCr 4:2:2, and up to

pg. 2 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

4k2k@60Hz with 12bit YCBCR 4:2:0

Support color space conversions among RGB, YCbCr4:4:4, YCbCr4:2:2 and xvYCC video formats

Support all HDMI 3D formats up to 2160p@30

Support high resolution VESA mode video format up to QSXGA@60Hz

Support reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz,

compressed audio (IEC 61937), DSD, DST, DTS and HBR

Support simultaneous HDMI Coax and L/R audio outputs

Support smart EDID management

Support RS-232, remote control, on-panel control and TCP/IP Control

3. Package Contents

1 x HDMI 4x4 Matrix Switcher

1 x 12V/2.5A Power Adapter

1 x Operation Manual

1 x Wideband IR Rx cable

1 x HDMI Matrix IR Remote

2 x Mounting ears(Matrix)

1 x RS-232 cable

4. Specifications

Video Bandwidth 594MHz [18Gbps]

Support Video Resolution 480i, 576i, 480p, 576p, 720p, 1080i,1080p24/30/50/60,

2160p24/25/30/50/60;

Input Ports 4×HDMI, 1×IR Receiver, 1×RS-232,

1xRJ-45(Control)

Output Ports 4×HDMI, 4×Toslink, 4×L/R

HDMI connector Type A 19 pin female

RJ-45 connector WE/SS 8P8C

3.5mm connector IR Receiver

ESD Protection Human-body Model:

± 8kV (Air-gap discharge)

± 4kV (Contact discharge)

Power Supply 12V/2.5A DC (US/EU standards,

CE/FCC/UL certified)

pg. 3 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

Dimensions 440 mm (W)×200 mm (D)×45 mm (H)

Weight 1820 g

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF

Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF

Relative Humidity 20~90 % RH (non-condensing)

Power Consumption 30 W(max)/0.5w(Standby)

5. PANEL FUNCTIONS

5.1 Front Panel

1. LCM: Display the information of each input and output setting and EDID management.

2. IR: IR Receiver window (accepts the remote control signal of this device only).

POWER: Press this button to power the device on/off. The LED will illuminate green when the power is

on, red when it is in 'Standby' mode.

LOCK: Press this button to lock all the buttons on the panel, press again to unlock.

3. OUTPUT/INPUT: Press the OUTPUT and INPUT button to select the output corresponding input.

For example: Press OUPUT ALL > INPUT 1, The OUTPUT A, B, C, D will be set to INPUT 1.

Press PTP button, The OUTPUT A, B, C, D will corresponding INPUT 1, 2, 3, 4.

pg. 4 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

4. EDID: Smart EDID management, the LCM will display the EDID operation.

Press the MENU button enters the EDID management window. Press UP or DOWN button to select the

needed EDID setting. Press ENTER button to download EDID into input source, it can easy

download any EDID setting to any input port.

Note: The EDID mode table as below

EDID Mode

EDID Description

1080p, 2CH AUDIO

1080p, DOLBY/DTS 5.1

1080p, HD AUDIO

1080i, 2CH AUDIO

1080i, DOLBY/DTS 5.1

1080i, HD AUDIO

3D,1080p, 2CH AUDIO

3D, 1080p, DOLBY/DTS 5.1

3D,1080p, HD AUDIO

4K30_444, 2CH AUDIO

4K30_444, DOLBY/DTS 5.1

4K30_444, HD AUDIO

4K60_420, 2CH AUDIO

4K60_420, DOLBY/DTS 5.1

4K60_420, HD AUDIO

4K60_444, 2CH AUDIO

4K60_444, DOLBY/DTS 5.1

4K60_444, HD AUDIO

pg. 5 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

Copy from HDMI OUTPUT A

Copy from HDMI OUTPUT B

Copy from HDMI OUTPUT C

Copy from HDMI OUTPUT D

EDID. What is it and what is it used for?

Under normal circumstances, a source device (digital and analog) will require information from a connected

device/display to know what resolutions and features are available. The source can then cater its output to

send only resolutions and features that are compatible with the attached device/display. This information is

called EDID (Extended Display Information Data)

and a source device can only accept and read one EDID from a connected device/display. Likewise, the source

can only output one resolution to a connected device/display.

Why is EDID so important with the HDMI Matrix?

The Matrix is complex piece of technology that replicates and switches between multiple inputs and outputs.

Each connected source device will require one EDID to read. EDID management is carefully handled by HDMI

Matrix to provide a single EDID for each source to read.

What options do I have to manage the EDID in the HDMI Matrix?

First, it is important to note that each source device can only output one video/audio signal type. This includes

resolutions and timings. When multiple devices/displays are used, such as with the HDMI Matrix, it is

important to use devices/displays that have similar or compatible resolutions/features. This will ensure that

the single video/audio signal produced by the source device is accepted by all of the connected output

devices/displays. The user has the option, through the EDID management window, to choose how the unit will

manage the EDID from multiple HDMI devices/displays. Therefore the user has some control over the

resolutions/features that the source devices will output. The HDMI Matrix has a multiple EDID management

modes that will control how the EDID information from multiple devices/displays are combined, ignored, and

routed.

pg. 6 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

5.2 Rear Panel

1. PC CONTROL

TCP/IP: This port is the link for TCP/IP control and connects to an active Ethernet link by an RJ-45 cable.

RS232: Connect to a PC or control system by D-Sub 9-pin cable for the transmission of RS-232 commands.

2. HDMI INPUT: Connect to the HDMI sources device such as a DVD player or a Set-top Box by HDMI cable.

3. AUDIO OUPUT: The coaxial and L/R audio output to audio amplifiers or speakers.

4. HDMI OUTPUT: Connect to HDMI equipped TVs or monitors.

5. IR EXT: If the front IR sensor of unit is obstructed or the unit is installed in a closed area out of infrared line

of sight, the IR RX receiver included can be inserted into the IR EXT port at the rear to extend the IR sensor

range and enable local control of the matrix.

6. DC POWER INPUT: Connect to 12V/2.5A DC power adapter.

pg. 7 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

6. Remote Control

1. Press this button to power on the matrix or set it to standby mode.

2. Press these buttons to select output A, B, C, D for input 1, 2, 3, 4 ports.

pg. 8 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

7. PC Controller user guide

Installation

Matrix controller is green software. Just copy MatrixController.exe to PC which is used to control the Matrix by

RS232 COM port or TCP/IP to complete installation.

Preparation

Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local

area network)

Power-up Matrix

Double click MatirxController.exe icon to run it

How to control Matrix

“General” page

1. Select RS232 COM or TCP mode

2. Select RS232 COM port

3. Click to connect or disconnect PC with Matrix

4. Select Matrix IP

5. Connect to Matrix IP

6. Search Matrix IP

pg. 9 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

7. Configure Matrix IP and MAC

8. Click to reset to the factory settings

9. Reboot Matrix system

10. Device information display area

11. Click to refresh device status: include device information displayed in 10 areas and Input/output settings on

“Matrix” page

12. Click to clear device information

13. Enable or disable Beep

14. Power on/off Matrix system

Configure TCP

After action of 7, edit form will pop-up as below:

1. Select auto or static IP

2. Set the Matrix IP

3. Set the Matrix MAC

“EDID control” page

pg. 10 All specifications are subject to change without prior notice.

Model :ATZ HDMI-V2-44B

Description:4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60 (4:4:4)

The controller has 3 methods to set the EDID mode. Manual mode, Copy mode and open EDID file mode.

1. Select the needed EDID to input port and click set button to download EDID to the selected HDMI input port.

2. Copy the selected HDMI output EDID and click set button to download EDID to the selected HDMI input port.

3. Open the user define EDID file and click set button to download EDID to the selected HDMI input port.

4. Click the status button to refresh input EDID status.

Inhaltsverzeichnis

Andere ATZ Schalten Handbücher

ATZ

ATZ US241H Bedienungsanleitung

ATZ

ATZ HDBT-E70-WPVD Bedienungsanleitung

ATZ

ATZ HDMI-91SM Bedienungsanleitung

ATZ

ATZ HDMI-161SM Bedienungsanleitung

ATZ

ATZ HDMI-V2-41SMPR Bedienungsanleitung

ATZ

ATZ HDMI-V2-31L Bedienungsanleitung

ATZ

ATZ HDMI-414PR Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung