AUDAC MWX65 Montage- und Bedienungsanleitung
MWX65
User manual & Installation guide
All-in-one wall panel
www.audac.eu
2
3
Index
Introduction 5
Precautions 6
Chapter 1: Overview of MWX65 8
Overview front panel 8
Front panel description 9
Overview rear panel 11
Chapter 2: Quick start guide 12
Chapter 3: Installing, connecting & configuring 14
Installing 14
Connecting 15
Configuring 18
Chapter 4: Using the MWX65 21
Chapter 5: Technical specifications 25
Chapter 6: Notes 27
4
5
Introduction
All-in-one wall panel
The MWX65 is an All-in-one wall panel designed for use in combination with AUDAC MTX series
matrix systems. This wall panel has a graphic display and can control the routing, volume, bass,
treble and mute for one zone. Besides those control functions, it also provides the possibility to
connect a microphone and a stereo line input source. The MWX65 wall panel should be connected
using UTP/FTP CAT5E (or better) twisted pair cabling.
The following functions of the zone can be controlled:
- Volume within a range of 0dB to -70 dB
- Input source selection
- Mute / unmute
- Bass within a range of -14dB to +14dB
- Treble within a range og -14dB to +14dB
The microphone input on the wall panel is connected using an XLR connector, while the line
inputs are implemented using RCA connectors.
6
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY
ALWAYS HANDLE THIS UNIT WITH CARE
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING
LIQUID.
DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR
OTHER APPARATUS THAT PRODUCE HEAT
DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST,
HEAT, MOISTURE OR VIBRATION
THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER
DON’T MAKE OR CHANGE ANY CONNECTIONS WHILE THE UNIT OR ANY ASSOCIATED
DEVICES ARE POWERED ON.
7
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing to qualified
service personnel. Do not perform any servicing (unless you are qualified to)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant
specifications described in following directives: 2004/108/EC (EMC), 2006/95/
EC (LVD) and 2011/65/EC (RoHS)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with regular
houshold waste at the end of its working life. This regulation is created to prevent
any possible harm to the environment or human health.
This product is developed and manufactured with high quality materials and
components which can be recycled and/or reused. Please dispose of this product
at your local collection point or recycling centre for electrical and electronic waste.
Do this to make sure that the product is recycled in an environmental friendly way,
and help to protect the environment in which we all live.
8
Chapter 1
Overview front panel
The front panel of the MWX65 wall panel contains a 2.5” graphic color LCD display with two additional
audio inputs. The unbalanced line input is connected with RCA connectors while an XLR connector
is used for connecting balanced microphones. Each input is accomodated with a push-lock gain
control potentiometer and a clip indicator LED. A big rotatable function selection push dial is provided
below the LCD display.
2.5” Graphic color
LCD display
Rotatable function
selection dial
Unbalanced line
Balanced microphone
input
Push-lock gain
control potentiometer
with clip indicator LED
9
Front panel description
Unbalanced line input
An unbalanced stereo audio source can be connected to these RCA connectors, creating an
additional local input.
Push-lock gain control potentiometer with clipping LED
The sensitivity for the line and microphone inputs can be adjusted with these potentiometers.
Through the push-lock mechanism, they can be opened and hidden again by pressing them.
Above every potentiometer is a clipping indicator LED provided which illuminates when clipping
of the input signal occurs. When this LED is lit, the signal is distorted and the level should be
reduced by turning back the potentiometer. The sensitivity for the line and microphone input can
be adjusted within a range of 0dB and -∞dB.
Balanced microphone input
A microphone can be connected to this XLR input connector, which allows voice announcements
to a particular zone. For powering condenser microphones, a phantom power voltage of 12 Volts
can be software enabled.
10
2.5” Graphic color LCD display
This graphical color LCD displays gives a clear overview of all the functions and settings of the
wall panel.
Rotatable function selection dial
The big rotatable dial enables you to control all functions and settings of the wall panel by just
three simple actions: rotate left, rotate right and push. Actions such as browsing between the
zones, increasing the volume, audio source selection, ... can be done by rotating the dial left and
right. Actions such as selection and deselection, toggle settings, ... can be done by pressing the
knob.
Andere Handbücher für MWX65
1
Inhaltsverzeichnis
Andere AUDAC Controller Handbücher
Beliebte Controller Handbücher anderer Marken
ABB
ABB ACS580-01 drives Bedienungsanleitung
Panasonic
Panasonic GM1 Series Bedienungsanleitung
Emerson
Emerson SW93 Bedienungsanleitung
AutoAqua
AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung
Panasonic
Panasonic FP? Positioning Unit RTEX Bedienungsanleitung
Alpha IP
Alpha IP MIOB 21001 Bedienungsanleitung
