AUDAC IMP40 Bedienungsanleitung

IMP40

User Manual

www.audac.eu

ADDITIONAL INFORMATION

This manual is put togheter with much care, and is as complete as could be on the

publication date. However, updates on the specifications, functionality or software

may have occurred since publication. To obtain the latest version of both manual and

software, please visit the Audac website @ www.audac.eu.

Index

Introduction 5

Precautions 6

Safety requirements 6

Caution servicing 7

EC Declaration of Conformity 7

Waste of Electrical and Electronic Equipment (WEEE) 7

Chapter 1: Connections and connectors 8

Connection standards 8

Chapter 2: Overview IMP40 9

Chapter 3: Using the IMP40 10

Database updates 10

Module screen 10

Station selection 11

USB backup 12

Settings screen 12

Chapter 4: Installing the IMP40 15

Chapter 5: Additional information 17

IP basics 17

Technical specifications 19

Notes 20

Introduction

SourceCon™ internet audio player module

The IMP40 is a professional internet radio player featuring SourceCon™ modular

technology. This unique technology guarantees true plug & play implementation to any

compatible device. When inserted to a supporting slot, the module is instantly installed,

discovered and ready for operation without requiring any additional internal wiring or

complex configuration.

The IMP40 features the unique Linum™ technology which eleminates any unwanted

behaviour such as sudden channel hopping or music stops. When the connection is

interrupted, automatic switching to inserted media carriers (USB drives) avoids unpleasant

silences in background music applications. The audio stream will be automatically and

seamlessly restored afterwards.

It synchronizes with the vTuner database which contains over 30.000 channels, allowing

selection on different criteria such as genre, location, language, ... while custom streams

can also be added to a preference list up to 100 entries.

The input connection is implemented by an RJ45 type connector with indicator LED’s on

its panel, allowing connection to any ethernet network. The balanced stereo line output

is connected through two 3-pin terminal block connections.

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• AVOID ELECTROSTATIC DISCHARGE BY TOUCHING GROUNDED POINT BEFORE

REMOVING THE MODULES FROM THEIR PROTECTIVE BAG

• AVOID TOUCHING OF THE COMPONENTS ON THE CIRCUIT BOARD DIRECTLY

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP

OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED

FOR LONG PERIODS OF TIME

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

• ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE

EARTHING CONNECTION

• THE INSTALLATION, CONNECTION AND CONFIGURATION OF THE DEVICE

SHOULD BE DONE BY QUALIFIED TECHNICIANS

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and

further relevant specifications described in following directives:

2004/108/EC (EMC) and 2006/95/EC (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular household waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose of this product at your local collection point or

recycling centre for electrical and electronic waste. Do this to

make sure that the product is recycled in an environmental friendly

way, and help to protect the environment in which we all live.

CAUTION

The symbols shown are internationally recognized symbols that warn about potentional

hazards of electrical products. The lightning flash with arrowpoint in an equilateral

triangle means that the unit contains dangerous voltages. The exclamation point in

an equilateral triangle indicates that it is necessary for the user to refer to the users

manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not

open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified

personnel. Opening the chassis for any reason will void the manufacturer’s warranty.

Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take

it to a dealer for service. Disconnect the unit during storms to prevent damage.

Chapter 1

Connections and connectors

CONNECTION STANDARDS

The in- and output connections for AUDAC audio equipment are performed

corresponding to international wiring standards for professional audio equipment.

3-Pin terminal block:

For balanced in & output connections

Left: Signal - (XLR Pin 3)

Center: Signal + (XLR Pin 2)

Right: Ground (XLR Pin 1)

For balanced line output connections:

For unbalanced line output connections:

Chapter 2

Overview IMP40

The IMP40 is a SourceCon™ compatible module featuring an (internal) board-edge

connector which carries all signals for getting it connected to any supporting main unit.

All external in & output connections shall be made using the available connectors on

the panel.

1) Balanced stereo line output:

The balanced stereo line output is implemented using two 3-pin terminal block

connectors. The audio output available on this connector allows it to be fed to any

amplifier or pre-amplifier.

2) Ethernet RJ45 connector:

The Ethernet connection implemented using an RJ45 type connectors. This Ethernet

connection works as the audio stream input of the IMP40. Hereby it shall get connected

to any LAN network with internet access for reaching the database and audio streaming

servers.

For more information about the Ethernet configuration of this device, check ‘Chapter 4:

User interface & Configuration’ and ‘Chapter 5: IP Basics’ of this user manual.

Chapter 3

Using the IMP40

Since the IMP40 is a SourceCon™ module, it can be combined with a variation of

supporting main units. The operation and configuration interface might be different of

the unit where installed, however the offered functionality is identical. Some devices

will support control and configuration through a front panel graphical control interface

on a display, while others are also supporting web-control.

This manual describes the control configuration possibilities using front panel control. For

applications where more control possibilities are offered, check the instruction manual

of the used main device for more instructions.

Database updates

The IMP40 comes with the vTuner database pre-loaded. Since continuously new radio

stations are being added, it is recommended to manually start the database update

process when using it for the first time. How to start the manual update process is

described in the Settings > DB info chapter of this instruction manual.

When operational, the IMP40 will regularly check with the database server whether a new

update is available, and if so, automatically start the database update process without

any noticeable consequences for the user / listener.

Module screen

The module screen gives an overview of the

IMP40’s current operation mode. The name of

the currently playing station including additional

carried information such as track name, program

name, ... will be indicated on this screen.

Inhaltsverzeichnis

Andere AUDAC Radio Handbücher

AUDAC

AUDAC ISP40 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung

PRESIDENT

PRESIDENT TEDDY R. Bedienungsanleitung