AUDAC GIAX Montage- und Bedienungsanleitung
PROFESSIONALAUDIO EQUIPMENT
GIAX Design Column speaker
User Manual &
Installation Guide
GIAX
DesignColumnSpeaker
AUDAC
AUDAC PROFESSIONAL AUDIO EQUIPMENT
User Manual & Installation Guide
AUDAC
http://www.audac.eu
1
INTRODUCTION .....................................................................................................................................................................................................................2
SAFETY REQUIREMENTS....................................................................................................................................................................................................3
WARNING - CAUTION.......................................................................................................................................................................................................3
INSTALLATION.......................................................................................................................................................................................................................4
DETERMINING LISTENING AREA AND MOUNTING HEIGHT.................................................................................................................................4
OTHER POINT TO PAY ATTENTION TO ......................................................................................................................................................................6
CONNECTING THE GIAX.....................................................................................................................................................................................................7
CONNECTIONS...................................................................................................................................................................................................................7
ADDITIONAL INFORMATION GIAX.................................................................................................................................................................................8
TECHNICAL SPECIFICATIONS........................................................................................................................................................................................8
PERSONAL NOTES.................................................................................................................................................................................................................9
Index
2
Introduction
This introduction briefly describes the possibilities of the GIAX design column
speaker..
he GIAX was designed to meet professional demands en proves its worth in
auditoria, conference rooms, meeting rooms, churches,… any place that requires a
great flexibility in positioning and tuning, ass well as state-of-the-art audio quality
and design.
Key features:
-High-quality 2 inch speakers, especially designed by AUDAC, make the GIAX suitable
for music and speech.
-Ultra lightweight design and strong aluminum housing.
-Especially designed metal wall brackets included. (Two different incline angles).
T
3
Warning
Only use the correct amplifier output voltage and impedance, exceeding
these limits could cause damage, fire or other failures.
Only install the speaker on surfaces that can accommodate the weight
of the speaker and the mounting bracket.
Don’t use any other mounting method than specified.
Attach a safety wire to the speaker when it’s mounted high up. This ensures
that the speaker can’t fall down in any case.
Avoid mounting the speaker in locations exposed to constant vibrations.
The mounting bracket can be damaged by excessive vibration, potentially
causing the speaker to fall down.
Caution
Avoid electric shocks: turn off the amplifier when connecting the
speaker.
Don’t operate the speaker for an extended period of time at distorted
sound. This can cause irreparable damage to the speaker.
Don’t stand or sit on it, nor hang down from the speaker as this may cause
it to fall down or drop.
Chapte
r
1
4
Installation
To achieve the best possible intelligibility and sound quality with a column speaker,
there has to be paid extra attention to the proper mounting of the speaker.
The dimensions of the desired listening area has to be determined where out the
correct mounting height and angle can be derived.
A step by step installation procedure describes the method to determine the mounting
height and angle for the GIAX.
DETERMINING LISTENING AREA AND MOUNTING HEIGHT
STEP 1:
Determine the dimensions of the desired Listening Area. This is a horizontal plane at the
level of the listeners ears. Refer to the dashed line in following figure.
Chapte
r
2
5
STEP 2:
After the listening area is determined, the mounting height and the incline angle of the
column speaker have to be determined.
For the best speech intelligibility, you have to keep the following fact always in mind:
A column speaker produces, through constructive interference between the
different drivers, a focused sound beam in the acoustical centre of the speaker.
The acoustical centre of the GIAX is precisely located in the middle of the
loudspeaker.
So, to achieve the best speech intelligibility in all situations, this sound beam needs to
cover the listening area over the largest surface at the listeners ear height.
This can be done by mounting the acoustical centre of the speaker, just above the
listeners ear height, and mounting the speaker with a small incline angle ranging from 0
to 5°.
6
OTHER POINTS TO PAY ATTENTION TO:
While mounting a column speaker, there are still some other points where has to be
paid attention to.
- Make sure that the loudspeaker array is always visible for everyone in the listening
area, to ensure a good audibility of the high tones. High tones can be compared with
light. When something is between the observer and the light source, the observer can’t
see the light source at it’s full power, this is what we call shadow.
For high tones, this is the same issue. When someone is standing between the listener
and the loudspeaker, the listener is located in the sound shadow. The sound shadow
will be experienced as a reduction of high tones.
- When the loudspeaker is installed at a very small angle, a large listening area can be
reached. Depending on the amount of reverberation in the room and the sound
shadow, the speech intelligibility on a far position may be low. In this situation, it is
recommended to use more loudspeaker arrays to split the listening area.
- When you move further than the maximum position of the listening area, only the
sound pressure level will decrease. There will be almost no tone height variation. The
decreasing factor of the sound pressure level depends strongly on the reverberation of
the room.
- When you are located too close to the loudspeaker array (closer than the minimum
distance, approximately 5 times the length of the speaker ) a decline of the high tones
will occur very soon.
- Because the loudspeakers are designed to beam the sound just above the listeners
ears, it’s better to mount the speakers not to high above the listening area.
- When you want to determine where exactly the edges of the listening area are located
in your situation, you have to do a practical test at this location. This is a job for an
experienced listener with well-trained ears. Put pink noise through the loudspeaker
array, and reduce the lower tones for this test because they do not contribute to speech
intelligibility. Walk around in the listening area and pay attention to the high tones. The
places where the high tones decrease rapidly are the edges of the listening area.
7
Connecting the GIAX
CONNECTIONS:
At the back of the GIAX is a 3 pole euro terminal block connector provided to connect
the amplifier with the GIAX column speaker.
Warning: Notice the polarity markings when wiring the loudspeaker cables.
Chapte
r
3
PIN 4 Ω
1 -
2 +
3 N.C.
1
2
3
8
Additional information GIAX
TECHNICAL SPECIFICATIONS
RMS Power 240 W
Max Power 480 W
Impedance 4 Ohm
Sensitivity 1W / 1m 102 dB
Sound pressure MAX / 1 m 118 dB
Frequency response (-3 dB) 100 Hz – 17 kHz
Horizontal coverage 170 °
Construction Aluminium
Front finish Aluminium grille
Drivers 24 x 2 inch
Dimensions (W x H x D) 70 x 2005 x 105 mm
Weight 6,50 Kg
Accessories included
Wall bracket
With two different incline angles
0° – 7.5° & 7.5° – 15°
Colors White RAL 9010
Black RAL 9005
Chapte
r
4
Inhaltsverzeichnis
Andere AUDAC Sprecher Handbücher
AUDAC
AUDAC ASP20 Bedienungsanleitung
AUDAC
AUDAC CS55 Montage- und Bedienungsanleitung
AUDAC
AUDAC CS85 Montage- und Bedienungsanleitung
AUDAC
AUDAC CELO8 Leitfaden
AUDAC
AUDAC SPRING-FIT CENA506 Bedienungsanleitung
AUDAC
AUDAC VEXO1 A Series Bedienungsanleitung
AUDAC
AUDAC CELO5 Leitfaden
AUDAC
AUDAC Ateo 2 Leitfaden
AUDAC
AUDAC ARES5A Bedienungsanleitung
AUDAC
AUDAC VEXO110A Bedienungsanleitung
AUDAC
AUDAC KYRA Series Leitfaden
AUDAC
AUDAC KYRA24 Leitfaden
AUDAC
AUDAC AXIR/O Series Bedienungsanleitung
AUDAC
AUDAC AXIR Montage- und Bedienungsanleitung
AUDAC
AUDAC VEXO 8 Leitfaden
AUDAC
AUDAC SPRING-FIT CENA510D Bedienungsanleitung
AUDAC
AUDAC CS75B Bedienungsanleitung
AUDAC
AUDAC ALTI Series Leitfaden
AUDAC
AUDAC WMM630 Bedienungsanleitung
AUDAC
AUDAC ATEO4 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung