Operation 5
After connecting the Bluetooth®adapter to the Audi music inter-
face, the blue LED in the adapter flashes with a low frequency during
the search for Bluetooth®devices. Before music can be played, your
A2DP-compatible end device must be connected to the adapter via
the Bluetooth®connection. Consult the operating instructions for
your A2DP-compatible end device to find out how to carry out the
connecting process (mobile phone or MP3 player). Connection must
take place in accordance with the instructions provided in this docu-
ment and the operating status of the end device to be connected.
The access code, passkey or PIN is “1234”. Following connection
and a short initialization phase, the A2DP central menu appears
with the name of the end device in the title line of the MMI display.
If the Bluetooth®connection has been made correctly, the blue LED
lights up constantly in the Bluetooth®adapter.
Note
•If several A2DP-compatible end devices are located in the
vehicle, the Bluetooth®adapter connects with the end device which
was most recently connected. If necessary, confirm the connection
to the end device.
•The Bluetooth®adapter puts the end device in Play mode and
the end device starts to play automatically. While the track is
playing, the blue LED in the adapter flashes with a high frequency.
While an A2DP-compatible end device is connected to the Blue-
tooth®adapter, the adapter is hidden from other Bluetooth®
devices.
•If the track is only played on the connected end device, the track
can be transferred manually to the MMI by selecting Forced Audio
Connect ⇒page 5.
•When using further functions of the connected A2DP-compatible
end device, e.g. when transmitting large data quantities to another
Bluetooth-enabled end device, the audio transmission my be
impaired. If this happens, stop the transmission!
Operation
Controlling the connected end device via the
MMI
All functions of the Bluetooth®adapter can be accessed via the intu-
itive and standardized operating concept of the MMI terminal
⇒“Infotainment/MMI, Operating instructions”, section “General
operation”.
Function overview:
Note
The manual control functions MIX (Track mix) and SCAN (Play intro)
are not supported by the Bluetooth®adapter.
Current Track The current track is played.
Next Track The next track is played.
Previous Track The previous track is played.
Manual Functions selected via the con-
trol wheel (e.g Fast-for-
ward/Rewind).
Stop track (Pause).
and Fast-forward and Rewind the
track by pressing the arrow keys
on the MMI terminal.
On/Off switch
< >
