Audio Authority 1542S Bedienungsanleitung
Quick Start Guide
Wireless Headset • Model 1542S
For Use with Series 1500
Intercom Systems
REAR VIEW
801-455
Adjust A-B-C switch
(must be set to A
for intercom use.)
Adjust switch 3 to reduce
wireless interference with
other DECT headsets
Adjust dial for best
headset microphone
volume
Introduction
The Model 1542S Wireless Headset for Series 1500 and 1580 Intercom Systems
allows freedom of movement from the intercom Counter Station for maximum
efciency. Multiple headsets can operate in close proximity. Please refer to the
included Sennheiser manual for detailed information. If you experience difculties,
call Audio Authority Support at 800-322-8346 M-F 8:30 AM to 5:00 PM EDT.
The 1542S includes
• Sennheiser D 10 Series EPOS headset, technical manual, and accessories
• Connection cable 801-455 for 1500A and 1500AH Intercom Counter Stations
1. Plug the power cable into the power jack on the back of the base and plug the
power adapter into an AC power outlet. The Power LED lights up.
2. Place the 1542S headset in the charging cradle. The charging LEDs on the
base indicate the charging status. Charge the headset prior to the rst use.
3. Connect the RJ-45 end of the 801-455 cable into the port marked Phone
on the 1542S base unit and plug the 2.5mm cable end into the port marked
headset on the 1500A Counter Station as shown. Select the Privacy key on
the 1500A to route audio to the 1542S headset.
4. The 1542S headset and base that came in the box are subscribed (paired) to
each other and ready to use after charging.
LINK BUTTON
AUDIO BUTTON
UP / DOWN FOR VOLUME
PUSH FOR MUTE
OPTIONAL
HEADBAND /
EAR PAD
2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 • 859-233-4599 • Fax: 859-233-4510
support@audioauthority.com • www.audioauthority.com
752-768
20210118
Support
For support and technical documentation visit:
www.audioauthority.com/1542s
Manufacturer website:
www.eposaudio.com/en/us/enterprise/products/d-10-phone-us-
dect-headset-506410
Troubleshooting Tips
If your voice is too quiet to be heard clearly at drive up
• Increase volume by turning up the mic volume dial one
increment at a time.
If your headset interferes with other DECT headsets nearby
• Reduce wireless range by pushing switch 3 down.
If battery life is not adequate
• Turn off the headset between calls (single press Link button
once to toggle “on” and “off”).
• Increase battery life by using narrowband transmission -
push switch 5 down (may reduce sound quality).
For more information, see the D10 Series manual included with this headset.
(Download the manufacturer’s manual at www.audioauthority.com/1542s)
Inhaltsverzeichnis
Andere Audio Authority Headset Handbücher
