•6 Send A & Return A: The upper knob sets the level of the Aux
Send A (”SEND A” on the panel) to the Send A Output Jacks
(see sections below). The lower knob sets the gain for the
Return A (”RTN.” on the panels). Range for Send A Levels:
´8 dB to + 6 dB relative to input level. Range for Return
A Gain: ‐ 10 dB to + 12 dB relative to the output of Aux A
summing stage. The red dot refers approximately to the unity
gain settings for the Send A channel, The blue dot refers
approximately to the unity gain settings for the Return A
channel.
•7 Send B & Return B: The upper knob sets the level of the
Aux Send B (”SEND B” on the panel) to the Send A Output
Jacks (see sections below). The lower knob sets the gain
for the Return B (”RTN.” on the panels). Range for Send B
Levels: ´8 dB to + 6 dB relative to the output of Aux B
summing stage. Range for Return B Gain: ‐ 10 dB to + 12 dB
relative to input level. The red dot refers approximately
to the unity gain settings for the Send B channel, The blue
dot refers approximately to the unity gain settings for the
Return B channel.
•8 Return A Status Led: The led monitors signal activity
after gain stage.
•9 Return B Status Led: The led monitors signal activity
after gain stage.
•10 Return A Panorama: Sets the panning across the master bus
stereo field.
•11 Return B Panorama: Sets the panning across the master bus
stereo field.
•12 Return A Switch: ON position: connect the Return A to
master stereo bus. OFF position: Mute.
•13 Return B Switch: ON position: connect the Return B to
master stereo bus. OFF position: Mute.
8
