Audio DCSTS-K071 Bedienungsanleitung
Window Intercom System
DCSTS-K071
Installation &
User Guide
December 2020
Window Intercom System
DCSTS-K071
Installation &
User Guide
December 2020
2
Contents
Product Overview
Components
Connections
Installation Instructions
Speaker & Microphone Kit Installation
StaSideInstallation
Customer/Visitor Installation
Hearing Loop Installation
AmplierSetup
Troubleshooting
Engineer’s Mode
3
3
4
5
6
6
7
9
10
12
13
Contactahasapolicyofcontinuousproductdevelopment,andthereforesmallspecication
changesmaynotbereectedinthismanual.Images,labels,packaging,accessoriesandproduct
coloursaresubjecttochangewithoutnotice.
3
Speaker & Microphone Components
Product Overview
Window intercom systems provide assistance for clear communication where
normal speech is impaired by use of glass, a security screen or other similar
barriers.
There is an optional hearing loop facility, providing additional assistance for
hearingdevicewearers.
1. Installation and User Manual
2. Amplier
3. IEC Lead
4. Power Supply
5. HearingLoopAerial
(optional)
Fixing Kit:
• Adhesive Clip x 10
• No.6x1/2”CountersunkScrewsx15
• P-Clips x 6
5
General Components
1. Speaker Pod
2. Mouse Microphone
3. StaPod
4. Double-Sided Fixing Pad
4
3
2
1
2
1
3
4
4
Connections
LED connection or alert tone (if required)
CondenceLEDtoconrmthesystemispowered
oranalerttonefortheattentionofsta
Stamicrophone
Customer/visitor microphone
CondenceLED(ifrequired)forstatusalerts
and fault detection
Hearing loop aerial
Line in connection for
external audio source
Staspeaker
Customer/visitor speaker
Power input
connection
Use power supply
through ground
supply only
5
Negative -
or screened cable
Positive +
Werecommendthatinstallationiscarriedoutbyaqualiedengineer,
adheringtorelevantstandards.
Checkthecontentsoftheboxtofamiliariseyourselfwiththecomponents.
Installation Instructions
A basic toolkit recommended to install the system will include:
Trim cables if necessary (excluding the power supply)
to the required length to connect to the back of the
amplier.Bareapproximately6mmofthecableendsto
connecttothe2pinplugs.
• Wire Cutters/Strippers
• Tape Measure
• Pencil or Marker Pen
• Cable Ties
• Trunking
• Screwdrivers(FlatorBlade2.5mm
and Phillips Head PH2)
• BatteryorMainsDrill
• Drillbits: 2mm, 3mm, 5mm and 7mm
• Cable Tacking Gun (10mm)
Recommended Tools
Staff Counter Side
Customer / Visitor
Counter Side
StaPod
Mouse Microphone
Speaker Pod
6
1. Placetheamplierunderthestacounter,ensuringthatitwillnot
obstructstawhentheyaresitting.
2. Markthefourxingpointsfortheamplierunderthecounter.
4. Drillandxtheamplierinplaceusingthesuppliedscrews.
6. Installtheamplier’spowersupplyclosetoapowersocketoutletusing
thesuppliedmountingbracketandxingscrews.
Fixing points
AmplierInstallation
7
Microphone & Speaker Installation
1. Placethestapodonthestasideofthecountertop,ensuringitdoes
notcauseanobstructionandisasclosetostaaspossible.
2. Place the speaker pod on the customer side of the counter top, ensuring it
doesnotcauseanobstruction.
3. Place a mouse microphone on the customer/
visitor side of the counter top, ensuring it
does not cause an obstruction and is as close
tocustomers/visitorsaspossible.
For best performance all mouse microphones
shouldbettedfacingtheuserasshownin
4. Speakerpodsandstapodscanbeeitherfreestandingorxed.Moveto
step10ifyoudonotwishtoxthepodstothecounter.
5. Usecablemanagementholesinthecountertorunthestapod,speaker
pod,andmousemicrophonecablestotheamplier.Iftherearenot
already cable management holes, drill suitable locations near the rear of
boththestaandcustomersidesofthecounter.
6. Removethetopofthepodstogainaccesstothexingpoints.
7. Markthetwoxingpointsonthebottomofbothpods.Thenmarktwo
Staff Counter Side
Customer / Visitor
Counter Side
StaPod
Mouse Microphone
Speaker Pod
theimageontheright.Therecommendedminimumdistancebetween
themousemicrophoneandspeakerpodis300mm.
Mouse microphone direction
8
cable holes to be drilled, one for both the customer/visitor side and the
staside.
8. Ensuretherewillbeaccesstoretrievethecablesthendrilltheholes.
9. Fixthepodstotheirrespectivecounters.
10. Toxthemousemicrophonetoasurface,usetheprovideddouble-sided
xingpadorscrewthroughthescrew-holeinitscap.
11. Feedthewiresthroughthecablemanagementholes.
12. Avoidlooseortrailingcables.Usetrunkingortopreventtriphazardsor
unitsbeingtuggedfromtheirposition.
13. Routeallcablingneatlytotheamplierlocationonthestaside.
9
Theaerialshouldbexedunderthedesk-toporcountercentrallyonthe
customerorvisitorside,onehalfmountedhorizontallyunderthecounterand
theotherhalfmountedvertically,facingthecustomer/visitor(asintherst
scenariobelow).
Position the aerial under the counter using either the provided P-clips
oranotherxingmethodofyourchoice.Seethediagrambelowfor
recommendedpositioning.
Aistheoptimumlayoutforacounterhearingloop.
BandCareacceptableonlyifAisnotpossibleandthelayoutisalignedso
thatthemagneticeldwillbedirectedtowardsuser’sheadheights.
Ensureallhearingloopsignageisdisplayedclearly.
X
X
Hearing Loop Installation
(Optional)
A B C
Inhaltsverzeichnis
Andere Audio Gegensprechanlage Handbücher
