AudioBahn ATB12AJ Bedienungsanleitung

PLEASE READ THIS MANUAL

BEFORE OPERATING THIS UNIT.

RETAIN FOR FUTURE REFERENCE.

ATB10AJ / ATB12AJ

OWNER’S MANUAL

To bring the product to market that excites the consumer through sound and

vision from an orientation of integrity and customer service. We make you look as

good as you sound. We strive to take car audio to an extreme the world has never

seen, and a world that never stops evolving.

Audiobahn was established in 1997 with one long-term goal in mind, “Build

it Bigger, Badder, & Better, and the people will take notice!” We back this statement

with an engineering team that has brought home several Innovations, Design &

Engineering Showcase Awards, and a marketing team from around the world that

spends countless hours developing our no compromise products to satisfy the most

discriminating enthusiasts.

Our global manufacturing facilities feature ISO9002 ratings (the highest level

of quality control awarded in the electronics manufacturing industry), fully robotic as-

sembly lines and a state of the art, California based R & D laboratory.

Our Technical Department and entire staff look to strive above and beyond

the rest of the pack by going that extra mile to help you out. Whether you happen to

be a veteran competitor, or a beginner car audio enthusiast who does not know a

voice coil from a spider. We are all her to help you get the best system you can with

what you have.

Judge for yourself, and remember what it’s all about, “If it’s not Bigger, Bad-

der & Better, it’s not Audiobahn.” If audio is your life, Audiobahn is the brand for you!

We make you look as good as you sound. People never stop trying to get the best

product, so we will never stop making it.

The Audiobahn Way

Introduction___________________________________________________ 3

Contents of Carton_____________________________________________ 4

Mounting_____________________________________________________ 5

Controls and Functions__________________________________________ 6

Operation_____________________________________________________ 7

Specications__________________________________________________ 8

Troubleshooting________________________________________________ 9

Warning and Disclaimer__________________________________________ 10

Warranty______________________________________________________ 11-12

Notes_________________________________________________________ 13-14

Geting Started

Welcome to Audiobahn Inc.. This manual has been designed to provide information

for the owner, salesperson, and installer. For those of you who want quick informa-

tion on how to install this product, please turn to the installation section of this manual.

Other information can be located by using the table of contents. We at Audiobahn have

worked very hard to make sure that all of the information in this manual is current, but,

aswearecostantlyndingnewwaystoimproveourproduct,thisinformationissubject

to change without notice. All updated information can be found on our web page in the

technical support section.

TABLE OF CONTENTS

Dear Customer,

Congratulationsonyourpurchaseoftheworldsnestbrandofcaraudioproducts.Hereat

Audiobahn Inc. we are devoted to making our musical reproduction the vert best, and we

are pleased you have chosen our product. Through years of engineering expertise, hand

craftsmanship, and critical testing procedures, we have created a wide range of products

that reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your Audiobahn product installed by

an Authorized Audiobahn Dealer, as we provide specialized training through our Audiobahn

Installer Training Programs. Please read your warranty, keep your receipt, and original

carton for possible future use.

To get a free brochure on Audiobahn products in the US call (714) 452-1476 or e-mail us at

[email protected].

WARNING

Continuous exposure to sound pressure levels over 100dB may cause permanent

hearing loss. High powered autosound systems may produce sound pressure levels

well over 135dB. Need we say more! Use common sense.

If after reading this manual you still have questions regarding your product, we recom-

mend that you see your nearest Audiobahn Dealer. A list of Authorized Audiobahn

Dealers can be found on our web page. If you need further assistance, feel free to call

us at (714) 452-1476 and ask for the Technical Department. Be sure to have the model

number, date of purchase, and invoice number available when you call.

The model number can be located on the outside of the carton. Record this in the space

provided below along with the date of purchase. It is a good idea to keep your receipt

with this as you will need it in the case of needing a warranty, repair service or ex-

change.

Date of Purchase: _____________________Model Number:___________________

INTRODUCTION

Contents of Carton

• AmpliedSubwooferwithFlame

GrillInstallation & Operation

Manual

• Warranty CardPower Cable with

Fuse and Ring Terminal

• Ground Wire with Ring Terminal

• HeatShrinkandZipTies

• 18GaugeRemoteTurnonWire

• BassKnobwithCord

• 1Fuse

• HighLevelInputHarness

StickerDogTag

1. Make sure to carefully read and understand the instructions before attempting

to install your new Audiobahn tube.

2. Before making any electrical connection, make sure that you disconnect the

battery’s ground cable to prevent the possibility of short circuit or damage to

your electronic equiptment.

3. For easier assembly, we suggest you run all wires prior to mounting your am-

pliedtube.

4. Route all of the RCA cables close together, and away from any power wires.

5. Use high quality connectors that can be found in the Audiobahn Connections

catalog. This will minimize signal and power loss.

6. Think before you drill! Be careful not to cut or drill into gas tank, fuel lines,

brake or hydraulic lines, vacuum lines, or electrical wiring when working on

any vehicle.

7. Avoid running wires over or through sharp edges. Use rubber or plastic grom-

metstoprotectanywiresroutedthroughmetal,especiallytherewall.

8. ALWAYS protect the battery and electrical system from damage with proper

fusing.

9. When grounding to the chassis of the vehicle, scrape all paint from the metal

to ensure a good clean ground connection. Grounding connections should be

as short as possible, and always be connected to metal that is welded to the

main body or chassis of the vehicle.

Mounting

Themountingpositionofyourampliedtubewillhaveagreateffectonthesoundperfor-

mance produced.

TRUNK MOUNTING

Mounting the tube in the trunk provides a good overall performance.

PASSENGER COMPARTMENT MOUNTING

Mounting the tube in the passenger compartment provides optimum sound, but reduces

the area for passenger seating.

Facing the tube towards a wall will increase the low frequency sounds.

Use one of the two following signal connections

RCA Cable Connection

1.ConnecttheRCAcableintothecorrectoutputterminalsonthebackofthesourceorHi/

Lo level converter.

2.Connect the RCA cable into their perspective plugs on the

ampliedtube.

High Level Input Connections

1. Using the cord provided with the kit, splice directly into the source unit’s speaker outputs.

Do not break the connection with the source unit and the speakers. Be sure to maintain

proper speaker polarity.

Controls And Functions

BASS BOOST

MAX

MIN

Audiobahn

L R

HI-IN REM L

LOW-IN

REM

+12 GND

PWR

PROT

GAIN L.P.F. BASS

MIN MAX 40Hz 250Hz 0dB 18dB

Splice into source

unit's speaker wires

(R+) Gray/White

(R-) Gray

(L+) Green/White

(L-) Green

Connect to

chassis ground of

vehicle

Connect to positive

lead / (Blue) wire.

Connect to source unit's

accessory lead or switched

12 volt source

Positive Negative

Vehicle Battery

L R

HI-IN REM L

LOW-IN

REM

+12 GND

PWR

GAIN BASS

0dB 18dB

Connect to

chassis ground of

vehicle

Connect to positive

lead / (Blue) wire.

Connect to source unit's

accessory lead or switched

12 volt source

Positive

Vehicle Battery

RCA's to

source unit

To Bass Boost Knob

To Amplified Tube

Operation

REMOTE BASS BOOST KNOB

Mounting and Installation

1. Usingthescrewsprovidedwiththekit,ndalocationunderthedash,centerconsole,

or a place that gives easy access to the remote bass boost knob.

2. Plug in the supplied cord into the back of the bass boost knob.

Adjusting the Gain

Toadjustthegainsetting,rstturntheampliergainallthewaydown.Thenturnthe

source volume up until distortion is audible, and then turn it down until distortion is inaudi-

ble.Next,turntheampliergainsettinguntilonceagaindistortionisaudible,andthenback

it down until distortion is inaudible.

Adjusting the Crossover

Turnthecrossoveradjustmentallthewaydownto40Hz.Thenslowlyturntheknobup

untilldesiredsoundisachieved.Normallisteninglevelshouldberightaround100Hzto

150Hz.Usecommonsensewhenadjustingyourcrossover.

Specifications

ModelNumber  ATB10AJ  ATB12AJ

PowerRMS   100Watts  120Watts

FrequencyResponse:  30Hz-250Hz  0Hz-250Hz

OverallDimensions:

 Height:  113/8” 131/2”

 Width:  111/2” 133/8”

 Length:  211/8” 225/8”

 Weight  25lbs.  30lbs.

Troubleshooting

Separate speaker wires and

insulate

Speaker wires short

STATUS

LAMP ON

Temperature shut down

Be sure proper speaker load

impedance recommendations

are observed.

(If you use an ohmmeter to check

speaker resistance, please

remember that DC resistance and

AC impedance may not be the

same.)

AMP

TURNING OFF

MEDIUM/HIGH

VOLUME

impedance

Check speaker load

Reverse Left and Right RCA inputs

to determine if it is occurring

before the amp.

Check Audio Leads

NO SOUND

IN ONE

CHANNEL

Inspect for short circuit or an

open connection.

Check Speaker Leads

Fuse broken

wire with receiver on

No power to remote

AMP NOT

SWITCHING

No power to power wire

Is the Diagnostic

LED illuminated ? ( YES )

NO SOUND Is the power

LED illuminated ?

( NO )

Check fuses in amplifier.

Be sure Turn-on lead is connected

Check signal leads. Check gain

control.

Check Tuner/Deck volume level.

Clean contacts on fuse holders.

CHECK POINTS CURESYMPTOMS

Check for speaker short or

Amplifier overheating.

Repair power wire or connections.

Turn radio down

Replace fuse.

Check connections to radio.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AudioBahn Autolautsprecher Handbücher

AudioBahn

AudioBahn AT70V Bedienungsanleitung

AudioBahn

AudioBahn AT60 Bedienungsanleitung

AudioBahn

AudioBahn AT69 Bedienungsanleitung

AudioBahn

AudioBahn ABC4002Q Bedienungsanleitung

AudioBahn

AudioBahn AMS620H Bedienungsanleitung

AudioBahn

AudioBahn AT67 Bedienungsanleitung

AudioBahn

AudioBahn AT69 Bedienungsanleitung

AudioBahn

AudioBahn AT67 Bedienungsanleitung

AudioBahn

AudioBahn ABB122J Bedienungsanleitung

AudioBahn

AudioBahn ABP1000T Bedienungsanleitung

AudioBahn

AudioBahn ALUM10M Bedienungsanleitung

AudioBahn

AudioBahn AMW80H Bedienungsanleitung

AudioBahn

AudioBahn AMD60H Bedienungsanleitung

AudioBahn

AudioBahn AS13N Bedienungsanleitung

AudioBahn

AudioBahn ABP10T Bedienungsanleitung

AudioBahn

AudioBahn ACS2035N Bedienungsanleitung

AudioBahn

AudioBahn AT69 Bedienungsanleitung

AudioBahn

AudioBahn ABF39Q Bedienungsanleitung

AudioBahn

AudioBahn AT60J Bedienungsanleitung

AudioBahn

AudioBahn AT65 Bedienungsanleitung

AudioBahn

AudioBahn AT68 Bedienungsanleitung

AudioBahn

AudioBahn AMR60H Bedienungsanleitung

AudioBahn

AudioBahn ABC525V Bedienungsanleitung

AudioBahn

AudioBahn AT61 Bedienungsanleitung

Beliebte Autolautsprecher Handbücher anderer Marken

Blaupunkt

Blaupunkt GTt 300 Technisches Datenblatt

Boston Acoustics

Boston Acoustics SX55 Bedienungsanleitung

Kenwood

Kenwood KFC-W212 Bedienungsanleitung

VR3

VR3 Elite VRS653 Bedienungsanleitung

Premier

Premier TS-W3001D4 Bedienungsanleitung

Infinity

Infinity 6530cx Bedienungsanleitung

Focal

Focal K2 Power 165 KRX3 Bedienungsanleitung

Precision Power

Precision Power PPI4.2 Bedienungsanleitung

Jensen

Jensen XS Series Bedienungsanleitung

Blaupunkt

Blaupunkt GTx Series Bedienungsanleitung

Focal

Focal BombA 27 V1 Bedienungsanleitung

Blueant

Blueant S1 Bedienungsanleitung

Naxa

Naxa NCS-768 Bedienungsanleitung

Focal

Focal Polyglass 130 VRS Bedienungsanleitung

Boston Mobile Audio

Boston Mobile Audio SR80 Bedienungsanleitung

Blaupunkt

Blaupunkt GTx 352 DE Bedienungsanleitung

Focal

Focal K2 POWER 130 KF Bedienungsanleitung

Blaupunkt

Blaupunkt GTt 1200 Mk II Bedienungsanleitung