AudioCodes MediaPack MP-264 Bedienungsanleitung

2. Cabling

The basic cabling of your gateway is illustrated below:

Use only the supplied 12VDC +/-10%, tolerance, 2A, limited power source wall mount Class II power supply adapter.

Before connecting the gateway to power, ensure that the VAC ratings match, and that you have read the Compliance and

Regulatory Information at www.audiocodes.com/library.

AudioCodes MediaPack™Multimedia Home Gateway

MP-264 Quick Guide

1. Connect the gateway to the Internet, using one of the following

connectivity methods:

xDSL:Connect the xDSL port (labeled xDSL) to the

telephone socket, using an RJ-11 telephone cable.

WAN Ethernet: Connect the WAN Ethernet port (labeled

LAN4/WAN) to an external modem, using a CAT 5 Ethernet

cable.

Use minimum 26 AWG wire for connecting the xDSL

port to the public switched telephone network (PSTN).

2. Connect the Ethernet ports (labeled LAN 1-4) to your LAN

computers, using CAT 5 Ethernet cables.

3. Connect the telephone ports (labeled Phone 1-2) to your analog

telephones, using RJ-11 telephone cables.

4. Connect the gateway to a standard 110/220 VAC electrical wall

outlet, using the supplied AC/DC power adapter.

5. When powered on, the gateway's Status LED turns on. When

initialization completes (~ 2 min.), the LED changes from red to

green. If the gateway is off, press the Power button (located on

the rear panel) to switch it on.

For wall mounting the gateway, refer to the User's

Manual.

Welcome

Thank you for purchasing AudioCodes MediaPack

Multimedia Home Gateway!

This Quick Guide describes basic installation for

AudioCodes MediaPack 264 model (MP-264).

1. Before Installing

Make sure that the shipped package contains the following items:

MediaPack Multimedia Home Gateway

1 x RJ-11 telephone cable

1 x RJ-45 Ethernet cable

12V AC/DC power adaptor (use only supplied)

If any item is missing, please contact your sales representative.

4. Configuring VoIP Parameters

Before you can make VoIP calls, you need to register with an

Internet Telephony Service Provider (ITSP) and obtain account

and SIP Proxy server information

1. From the menu pane, click Voice Over IP; the Voice Over

IP page appears in the right pane.

2. Click the Line Settings tab, mark check boxes of lines

that are connected to telephones (clear those not

connected), and then click Apply.

3. Click the Edit icon corresponding to the telephone

lines, and then in the Line Settings page, configure the

parameters with values provided by your ISP.

4. Click the Signaling Protocol tab, and then select the 'Use

SIP Proxy' check box. In the 'Proxy IP Address or Host

Name' field, enter the ITSP's proxy server IP address or

host name. Click OK to complete the VoIP configuration.

To verify successful registration with

the proxy

server, ensure that the Phone

LED is lit green or in

the Voice over IP tab (System Monitoring menu), the

entry 'SIP Registration' displays "Registered"

for the

configured lines.

5. Pick up the phone receiver (or handset) and listen for a

dial tone; you’re now ready to make a VoIP call.

3. Configuring Network Parameters

1. Open a Web browser and then type the following URL

address to access the gateway's embedded Web server

graphical user interface: http://mp264.home

2. Select the Web GUI display language and click Continue.

3. Define a new login username / password and click OK.

4. In the Quick Setup page, select and define the Internet

connection type as instructed by your ITSP, and then

click OK. You are now connected to the Internet and can

proceed to configure VoIP parameters for

making and receiving voice-over-IP calls.

If there is no Internet connection, the Web GUI’s

Map View page (Home) displays a red icon after

the globe icon. Consult your ITSP for valid connection

parameters.

The gateway's default wireless (Wi-Fi) network name

(SSID)

comprises product name followed by "_" and

the 6 last characters of the MAC address in capital

letters (secured). For example, if the MAC address is

00:90:8F:2C:64:70 the SSID will be MP264_2C6470

The password is 0<serial number without first two

characters>. For example, if the SN is VT1234567, the

password will be 01234567. The SN is printed on the

rear of the MP-264.

Notice

Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing

product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can

it accept responsibility for errors or omissions. This document is subject to change without notice. Refer to the current Release

Notes that may be included with your documentation or hardware delivery. Updates to this document as well as software files can

be viewed by registered customers at www.audiocodes.com/downloads.

Date Published: May-28-2013

Document #: LTRT-18690

Andere AudioCodes Tor Handbücher

AudioCodes

AudioCodes i Series Montageanleitung

AudioCodes

AudioCodes Mediant 800 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 500 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 500 E-SBC Bedienungsanleitung

AudioCodes

AudioCodes Media Pack MP-11x Bedienungsanleitung

AudioCodes

AudioCodes Mediant 800 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 1000 Bedienungsanleitung

AudioCodes

AudioCodes MP-5 Series Bedienungsanleitung

AudioCodes

AudioCodes Mediant 2000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 1000 MSBG Handbuch

AudioCodes

AudioCodes Mediant 3000 Bedienungsanleitung

AudioCodes

AudioCodes MP-252 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-11x Series Bedienungsanleitung

AudioCodes

AudioCodes MP-11x Fast Track Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-263 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack 124 Montageanleitung

AudioCodes

AudioCodes MediaPack 504 Montageanleitung

AudioCodes

AudioCodes Mediant 500L MSBR Bedienungsanleitung

AudioCodes

AudioCodes MP-26 series Bedienungsanleitung

AudioCodes

AudioCodes Mediant 3000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 3000 TP-6310 Installations- und Betriebshandbuch

AudioCodes

AudioCodes Mediant 500Li MSBR Bedienungsanleitung

AudioCodes

AudioCodes M500L Montageanleitung

AudioCodes

AudioCodes Mediant 1000 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung