AUDIOLINE 5016 Bedienungsanleitung

English

User guide

Digital Cordless Telephone with

Caller Identication

5016

1 Earpiece

2 Display

3 Redial Button

4 Caller Identication

5 Talk button

6 Programming/Recall (R) Button

7 Microphone

8 Erase/Volume

9 Priority-memory button

10 Disconnect button

11 Memory button

12 Intercom/Mute

English

Index

Installation 4

Unpacking........................... 4

Connection ......................... 4

Belt Clips............................. 5

Battery ................................ 5

Battery Charge Indicator .... 6

Range ................................. 6

The Display......................... 7

Base Unit Indicators ........... 7

Handset Paging .................. 7

Operation 8

Making a Call...................... 8

Receiving a Call.................. 8

Redial Button ...................... 8

Volume Control ................... 8

Hold Function ..................... 8

Call Timer ........................... 8

Memory............................... 9

Caller Identication 10

Settings 11

Type of Ringer signal.......... 11

Volume of Ringer signal...... 11

Button Click ........................ 11

Auto - Answer ..................... 11

Handset PIN Code.............. 12

Tone/Pulse Dialling ............ 12

Recall Button Timing

(business use only)............. 12

PBX Function...................... 13

Optional Network Services. 13

Expanded System 14

General Information............ 14

Multiple Base Units............. 14

Multiple Handsets ............... 15

Base Unit ............................ 15

Intercom Function............... 16

Transferring Calls Between

Handsets ............................ 16

Conference ......................... 16

Select Base Unit ................. 17

De-register a Handset ........ 17

Other 18

Troubleshooting .................. 18

Guarantee........................... 19

REN .................................... 19

English

Installation

Unpacking

The package should include the following items:

- Handset - Mains adapter

- Base unit - Line cord

- Battery - Belt clip

Connection

1. Connect the mains adapter to the y socket of the base unit and to an

electrical wall socket.

2. Remove the battery cover from the back of the handset. Insert the battery

plug and t the battery into the handset. Replace the battery cover.

3. Place the handset in the base unit, with the keypad facing outwards. Once

the handset is correctly placed in the base unit, a beep will be heard and the

charge indicator 7 will illuminate on the base unit.

4. Charge the handset battery without interruption for 15 hours.

5. Connect the telephone line cord to the socket marked t on the base unit

and plug into the telephone network socket (using adapter plug if required).

IMPORTANT!

Under power failure conditions, this telephone will not operate. Please ensure

that a separate telephone, not dependent on local power, is available for

emergency use. The earpiece of the handset may attract small ferromagnetic

objects such as staples and pins, care should be taken when placing the handset

near these items. Do not place the base unit in areas of high humidity or where it

will be exposed to direct sunlight or other major heat sources.

This model can only be recharged with the keypad set

facing outwards!

English

Installation

Belt Clips

A belt clip is included, which can be tted on the back of the handset. To attach

the clip, press it into place over the back of the handset. On either side of the

handset, there are indents for the clips to clasp onto.

Battery

The telephone comes supplied with an environmentally friendly nickel metal

hydride (NiMH) battery. As with all batteries performance may degrade over

time, should you notice that the standby time has reduced considerably or there

are signs of leakage, the battery pack should be replaced.

A fully charged battery will last for approx. 100 hours in standby or approx. 10

hours call time. These operation times apply at normal room temperature.

A completely discharged battery will take about 15 hours to fully recharge.

Please note that the charge indicator 7 on the base unit is on while charging

and will go out when the battery is fully charged.

The battery charge indicator in the handset display will ash while charging and

will stop ashing when the battery is fully charged.

The equipment has an automatic charging mechanism that prevents the battery

from being overcharged or damaged due to prolonged charging.

Please note!

When the telephone is installed for the rst time, the battery must be charged for

15 hours before using the telephone.

The guarantee does not cover any damages caused by incorrect batteries.

The handset must be charged with the buttons facing outwards.

Please dispose of any batteries in an environmentally friendly manner.

English

Installation

Battery Charge Indicator

The symbol in the display indicates when it is time to recharge the battery.

The symbol has two segments, which disappear as the battery charge decreases.

When the battery is running low, the symbol will appear in the display and

a warning tone will be heard. If the handset is not recharged at this time, the

phone will cease to function until it is recharged.

Range

The range of the telephone varies depending on various factors in the

surrounding environment. The radio waves transmitting the call may be

hindered by obstructions, reducing the range.

Specied ranges require an unobstructed transmission between the handset and

the base unit. In such ideal conditions, the telephone range can be up to 300

metres. In a densely populated area, house, apartment, etc. the range of the

telephone will be reduced. Try to get the best range by relocating the base unit.

The ideal location for the base unit is a high and unobstructed place.

Out of range warning

If, during a call, the handset is carried too far from the base, a warning tone will

be heard from the handset. Unless the handset is moved closer to the base unit

within a few seconds, the call will be lost.

Please note!

When the warning tone is heard, communication is interrupted for the duration

of the tone.

English

Installation

The Display

Indicator Function

P Programming.

5 New number/s in Caller ID log.

Speed dial.

Indicates that a call is connected.

Flashes when the phone rings.

INT z Intercom calls and Mute function.

Battery charge indicator.

6 Shown within range of the base unit. Flashes when out of range.

Base Unit Indicators

5 New number/s in Caller ID log.

7 Charging.

y Illuminates when the base unit is connected, and ashes during

call and registration.

Handset Paging

Pressing j on the base unit will activate the paging signal of the handset. This

function is used to help locate the handset or to page the person carrying the

handset. The signal will stop automatically after a while, or if either the l

button on the handset or the j button on the base unit is pressed.

English

Operation

Making a Call

1. Enter the required number. Mistakes can be erased using C.

2. Press o, and the number is dialled.

3. Use l to terminate the call.

Please note!

If the telephone cannot connect to a line, a warning tone will be heard. The

problem may be due to the battery running low, the handset being too far from

the base unit or all of the transmission channels being engaged.

Receiving a Call

1. Wait for the handset to ring.

2. Answer the call by pressing o.

3. Use l to terminate the call.

Redial Button

If the number dialled is engaged or if you wish to redial the last number dialled,

press r and o.

Volume Control

The volume may be adjusted during a call using .

Hold Function

A call can be temporarily put on hold using the i button. Press it once more to

resume the previous call. The call cannot be resumed from another phone.

The display shows INT z as long as the call is on hold.

Call Timer

Following the connection of a call, a timer is shown on the display. The timer

helps you keep track of how long the call lasts.

English

Operation

Memory

The telephone has 1 Priority-memory button (u) and 10 speed dial memories.

A stored phone number can be dialled using fewer keystrokes. The memories

are numbered 0-9.

Storing Priority-memory

1. Press P.

2. Press u.

3. Enter telephone number (up to 25 digits). Use C to erase or change.

4. Press P to save settings.

Dialling using Priority-memory

1. Press u, and the number is dialled.

Storing Speed Dial Numbers

1. Press P.

2. Press m.

3. Enter memory position 0-9, or scroll using m.

4. Enter telephone number (up to 25 digits). Use C to erase or change.

5. Press P to save settings.

Please note!

Press r if you want a pause in the telephone number.

In case of a number change, store the new number in the location of the old

one.

Using Speed Dialling

1. Scroll the speed dial positions using m. You could also enter the memory

position directly using 0-9 when the display shows _ _.

2. Press o, and the number is dialled.

English

Caller Identication

Explanation of Caller ID

Caller ID allows you to see who is calling before you answer a call and see who

has called in your absence.

Received calls are stored chronologically. The call log will store up to 10

telephone numbers. The number will not be stored if the call is answered.

When the log is full, the oldest number will be deleted automatically, as the new

call is logged. New calls are indicated in standby mode by *.

IMPORTANT!

In order for numbers to be shown, the Caller ID service must be provided

by your network operator and a current subscription in place. Contact your

operator for more information.

This product is not compatible with type II Caller ID (CID on Call Waiting).

Retrieving and Dialling Incoming Numbers.

1. Press * The display will indicate the number of new entries (to the left) and

the total (to the right) number of entries stored in the call log.

2. Keep pressing * to scroll to the desired memory position.

3. PressP to show time/date.

4. Press o to dial the number or l to return to standby mode.

Messages

Apart from showing phone numbers, the display can show:

o or IntErnAtIonAL It is an International call or a call from a PBX (no

information received)

P or SECrEt The call is comes from a blocked number or a PBX.

Erasing Numbers

1. Scroll to the desired memory position as described below.

2. Press C to erase the number.

Erasing All Seen (i.e. Old) Numbers

1. Scroll to where the display shows how many new entries and the total

number of entries that have been stored in the memory (see above).

2. Keep C pressed until a tone is heard. All numbers are now erased.

Inhaltsverzeichnis

Andere AUDIOLINE Schnurloses Telefon Handbücher

AUDIOLINE

AUDIOLINE Switch 28x Bedienungsanleitung

AUDIOLINE

AUDIOLINE Oslo 282 Bedienungsanleitung

AUDIOLINE

AUDIOLINE ISDN Terminal 500 Bedienungsanleitung

AUDIOLINE

AUDIOLINE Switch 20x Bedienungsanleitung

AUDIOLINE

AUDIOLINE OSLO 102 Bedienungsanleitung

AUDIOLINE

AUDIOLINE Team 300 Bedienungsanleitung

AUDIOLINE

AUDIOLINE OSLO 50 Bedienungsanleitung

AUDIOLINE

AUDIOLINE Euro 802 Bedienungsanleitung

AUDIOLINE

AUDIOLINE DECT4500 Bedienungsanleitung

AUDIOLINE

AUDIOLINE WAVE 10X ECO Bedienungsanleitung

AUDIOLINE

AUDIOLINE Euro 282 Bedienungsanleitung

AUDIOLINE

AUDIOLINE Euro 300S Bedienungsanleitung

AUDIOLINE

AUDIOLINE STUDIO 80-QUADRO Bedienungsanleitung

AUDIOLINE

AUDIOLINE CDL400 Bedienungsanleitung

AUDIOLINE

AUDIOLINE DECT 7800B Bedienungsanleitung

AUDIOLINE

AUDIOLINE OSLO 580 Bedienungsanleitung

AUDIOLINE

AUDIOLINE EURO 200 Bedienungsanleitung

AUDIOLINE

AUDIOLINE FF 788 Bedienungsanleitung

AUDIOLINE

AUDIOLINE FF894 Bedienungsanleitung

AUDIOLINE

AUDIOLINE DECT 8048-SOS Bedienungsanleitung

AUDIOLINE

AUDIOLINE STUDIO 80-B Bedienungsanleitung

AUDIOLINE

AUDIOLINE Surf Bedienungsanleitung

AUDIOLINE

AUDIOLINE DECT4501 Bedienungsanleitung

AUDIOLINE

AUDIOLINE BigTel 165 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung